Had a Corona Xbox 360 slim that first would overheat right away. The problem ended up being one of the thermal diode resistors for the gpu. (ohm readings were way off) After that console booted up. However, as soon as you plugged in the disc drive it would throw error code 0031. Swapping the ADP chips took care of the problem, and the console is fully functional now. Just wanted to throw in my thanks friend.
You're welcome! I'm glad to hear that your Xbox 360 Slim is fully functional now. If you have any more questions or need further assistance in the future, feel free to reach out. Enjoy your gaming!
Man i sure wish you could help me with my 360s. It has sentimental value to me belonged to my deceased friend and getting it up and going would be awesome . Your video makes so much sense that resistors and chips cause this problem . I dont trust myself to try to damage the board by nit knowing what im doing . Thank you for the content sir .
Great vidéo again ! Question : I tried to replace thermal paste, up and under by removing the IHS of the XCGPU on my Xbox 360 Slim, but after replacing paste, my Xbox turns off instant central red light in 1 second after turning on, with the secondary Error 0033. Do you have any informations about this error ? What should I do? Thanks to you and keep going with your repair videos.
Had a Corona Xbox 360 slim that first would overheat right away. The problem ended up being one of the thermal diode resistors for the gpu. (ohm readings were way off) After that console booted up. However, as soon as you plugged in the disc drive it would throw error code 0031. Swapping the ADP chips took care of the problem, and the console is fully functional now. Just wanted to throw in my thanks friend.
You're welcome! I'm glad to hear that your Xbox 360 Slim is fully functional now. If you have any more questions or need further assistance in the future, feel free to reach out. Enjoy your gaming!
Man i sure wish you could help me with my 360s. It has sentimental value to me belonged to my deceased friend and getting it up and going would be awesome . Your video makes so much sense that resistors and chips cause this problem . I dont trust myself to try to damage the board by nit knowing what im doing . Thank you for the content sir .
You are welcome, thank you for the visit!
checking with x-y mode of the oscelloscope is a good idea , nice work though
Yes, you are right
Mashallah good work idrees bhai
"ADP chip produces positive and negative oscillations to derive FETs. As it gives oscillation on the GATE pin of FET."
Great vidéo again !
Question : I tried to replace thermal paste, up and under by removing the IHS of the XCGPU on my Xbox 360 Slim, but after replacing paste, my Xbox turns off instant central red light in 1 second after turning on, with the secondary Error 0033. Do you have any informations about this error ? What should I do?
Thanks to you and keep going with your repair videos.
IHS is not proper on the GPU central glass face chip.
Which ring was it? Hardware Failure, or General Hardware Failure?
It's not the RRod it's the Rdod RRod doesn't appear on the Xbox 360 slim pretty sure
Mine is 0021, still trying to fix it.
I think you uploaded the video again because you forgot to put the test you did to get the error code in the last version of the video.
Just changed the music.
@@idreestech Oh, I watched the first version without sound on the go, so that's why I didn't notice it.
Good
Thanks
Can you do also error 0032