2000 GMC Sierra | Installing A Limited Slip Diff
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- In today's video, the Peg Leg Sierra gets turned into a Peel Out Power Ranger with the help of the cheapest limited slip I could find that still looked legit.
Instagram @snidertron3000
The music I use in my videos is made by these rad people:
/ coreygagne
/ joakimkarud
/ dyallas
/ kevin-9-1
/ julianavila
Been following you for 5 years now. Still come back to watch your old videos for tips👍
Not trying to sound toxic but just offering some criticism. I have a similar truck to yours, so your videos are interesting. But your voice is too quiet and then the music screams lol.
MisTeR Crew not toxic at all. I totally agree. I've always been a quiet person and I have to constantly remind myself to speak up. I got a new microphone that I think helped on the 3 newest videos. Let me know if its any better.
Oh yeah. So much better in newer videos. But I love the videos so much that I don't mind playing my volume control like a seesaw.
SniderTron 3000 where did u buy that rear end I have the same exact truck and I need a posi
Can I post link of ur rear end inhave same truck will like to install this upgrade
I love your content ! I also have a 2000 GMC Sierra and I enjoy your videos because they help me out , keep up the awesome work bro!
Thanks, man, I appreciate that. It still blows my mind that anyone watches these garbage videos that some idiot in a garage makes lol But, I'm glad they help
i have one too with the same rust by the door on the bottom lol
That cracked windshield life ....lol same as my truck been 4 years and I got free glass ! LOL
MotoChuck it's on my to do list for it, but I'm too cheap to spend the money yet because this cracked up shit still works just fine lol
Glad your luck's better than mine, 3 hours after I got my cracked windshield replaced it got cracked again.
You deserve more subscribers quality content right here
Gig Big I appreciate that
I have the exact truck with 125 k. I could have lived without the bird flip. But thank you. What are the vanity plates saying.
Give us a link to where where we can buy it thanks
U find it
@@matthewvolpe83 no
yall find it
@@caseynail8439 nop
what gasket seal did you use? aswell as what gear oil did you use please and thank you??
Quick question how has the eBay limited slip doing any problems? Also Do you have the part number and what size gears are you running
Let me know I work for Eaton I can get you one for $400 shipped
I need one mine making a noise
Jose Gutierrez dm me on Instagram @davidjr02_
@@davidriverajr8332 i need one for a 2005 silverado 1500 rwd
@@davidriverajr8332 what’s your contact info I need one
I have a 2000 Chevy Silverado will that set up work on mine and if so how much is it
There may be hope for this crappy world yet, Yours has got to be one of the two or three video's that don't have a thumbs down. Great job boss!
Anthony Wayne I appreciate that a lot, man.
You got it buddy. Now lets hope I didn't jinx you lol. Stay careful.
Anthony Wayne lol will do
Looking to diff swap my 99 long bed 5.3 any suggestions on what diff to go with that would last me a good while
I seen some videos talk about backlash?
Did you have to calibrate anything like that?
No, hacks don’t do those things, but it should be checked if it’s done right
Oooo the lost 8mm wrench for the cross pin bolt lol
gun-nut257 5/16. It’s not 8mm
The rumble, is a ujoint. It will probably fall out. Mine did. So adding a L's will surely make your drive line fall out quicker 🙌👍
Hey, enjoyed the video. I have the 2WD GMC Sierra 2500 with the 8.1 vortec. My truck is also a one wheel drive. what is the name of this unit as I would like to get it for mine.
Link to differential you bought ?
Link ?
Link?
Link ?
Link
Link?
Getting ready to do this to my jeep. Good info💣
I have a 2000 Chevy Silverado 1500 side step. Changing my diff. Don’t know what size bearing I need. I’m purchasing the 10 bolt 8.5/8.6 30 spline 373. My rear is disk brake calipers in the front. Exact same setup as urs. But I’m changing my pinion set up too.
Should just be able to order an 8.6 install kit
Mwhahahaha the young snidertron! Haha video quality was good from day one I'm guessing !
so how are you liking your limited slip?. I have an open diff 2wd that I off-road in sand-snow.. does get stuck.. but kinda considering blowing cash on a limited slip.
I'm still very surprised with how well it's holding up. I abuse it almost every time I drive it and it's still doing great
Hey I bought the possy unit but when I drive it can hear something clunk all the time,
But when I lift it up on the Jack, and put it in drive it won’t do the noise!
Only time when I bring it down and driving slow I can hear the clunk noise?
Did anybody have a problem mine is 2000 GMC Sierra 4.8
What tire size are those brotha ? In these truck have the 8.5 ring gear would it be the same for my 99 Silverado 1500 5.3l nbs
If you had it to over again would you buy the same dif or the name brand
Nice break in process
Did u have to trim the shims a little to make it fit cuz I bought one like that and my shims didn’t go in when I was trying to make them fit one broke
Is there any pre load needed or measuring with a indicator
Did you remember to check backlash?
Where is this garage at? and what exact brand did you get? I wanna get one for my 95 chevy S10
How many hours did that take you?
I have a 93 k1500 with the 350 in it, she's a pegleg ha. Maybe sometime down the road I'll get her to spin both tires.
I'm wanting to to put a lsd in my 2001 gmc sierra 1500 sle . what size in rearend and splines. are you happy with the knock off lsd rather than a eaton brand?
Travis Shedd I believe all the 1500's after 98 have an 8.6 rear end with 30 spline axles. I'm actually surprisingly impressed with the knock off unit so far. I'm not gentle on this truck and it hasn't given me any cause for concern.
Does your truck have a 30 spline shaft I saw your video and I also want to install a new differential very helpful did you use factory shims ?
I've got a 2005 Silverado 1500 2wd with G80 locker. Is it worth getting another G80 or go your limited slip route. Cause my G80 is wore out
G80's have a pretty shit reputation. Obviously I went with an Ebay limited slip over a G80 lol
G80s dont work over 30mph, and blow apart after any real power is applied to them. Even stock power blows them up.
Proving how many of your videos I have seen so far, I don't even know if you still have the truck 4 years later. I guess I could just not comment on it since it's still so "early in the book " But I'm finally in a position where I'll be able to do the things I've always wanted to do with my truck.
It's a 2002 Silverado I built to order while still stationed in Japan because Navy Federal just needed 3k down payment on the 2002 Ws6 I had already speced out. $300.00 was the down payment on what I ended up building to order. It atleast performed the most basic limits I wanted. I atleast wanted a manually shifted, rear wheel drive V-8.
With as long as I've been waiting I want to order this as soon as possible and don't have the time to see if you still have it.
Edit to add the actual question I wanted to ask. Has this product held up for you? If you could do it all over again would you have went with a different company?
i'm confused on the LSD. can you slip an LSD into most open diff cars and you can reap it's benefits?
Yep
No measuring of backlash or anything????
2GUNMASTER if you measure it, it could be off. If you don't measure it, there's no way to prove its wrong lol
Nice I've done some like thatbchecked backlash by feel and checked preload with a long breaker bar . How long has yours lasted may ibask mine's still on the road. It's only been couple weeks tho lol
Alex Nordbeck well, I did this back in October and it's still doing great and getting beat on pretty consistently
I know he should have done back flash but many people don't care
I was gonna watch the video but man that freaking music
I regret it too, man. Fucking copyright infringement and there wasn't a whole of good free music out there
I wana get a new differential, which one did you use? Were can i get it?
I just search "gm 8.6 posi" on ebay and got the best cheap one I could find that would work.
Nice video...and good job man...i have question...can i use the factory ring pinion... for this aftermarket part or i have to buy a new one too...
Daniel Romero should be able to use the factory one
Nice...thank you for reply man...thinking about do it in my truck...
Hey bro question, What if mines it's a no burner differential what you suggest me for street wise burnouts both wheelers turning no 1 leg burner lol it's for a 05 silverado v8 5.3 liter single cab. I wanna swing it someday with both wheels turning LOL
I believe mines it's the 8.5 drum brakes no disk
Depends how much you want to spend lol cheapest is a mini spool, but then the wheels are locked together. I like this ebay unit though
03-06 comes only in drum brakes i have no clue why. The first step on these is gear ratio, change to 4:10 ($200) if your on 31-35" tires and it'll automatically have a better acceleration and torque. next, get a post unit (eBay $300). My tahoe wouldn't burn without getting a tune because some of these 03-06 won't let you override the "torque management" in the computer. Which as you probably have experience that it wouldn't let you go over 1800ish rpm when on the brake what so ever.
omg i have a 2000 gmc with tha front bumper clip on it white too lol that touched me.... i need to get a black one as my truck is dark grey ( call em smoke)
Did you use the same shims?
How u like it a year later
Do you have a link on where to get that posi?
Bro I have a 2002 GMC Sierra I wana know what posi will fit and what’s the spline if it’s 30 and it’s it 8.5 or 8.6
Double check this for sure, but I think all 1999 and later half ton trucks have the 8.6 with the 30 spline. You can check the RPO codes in your glovebox to find out what rear gear you have and that'll let you know what posi to get because sometimes they have to be a different offset of the thickness of the pinion on higher or lower gear ratios.
Ok another question when I do a burn out on my truck in 1st gear I drop it to 1st right and by its self it goes into 2nd gear how can I by pass
So a limited slip differential is to have both tire spinning??
Pretty much
I know this is an old video but my rear end went out and I love watching your videos for information! How could I get gears? Like what’s the best way? Pull them from another truck?? Or buy some online
I have an 06 suburban and my spider gears went out I got a replacement from autozone and it's been holding up
What kind of gear oil did you use? & how much of it?
You think this would work for a 1999 Chevy s10
Did u check the gear pattern to make sure it’s shimmed right???
T C c'mon, do I look like a hack??
bro i have a 2000 silverado 4.8 reg cab what kind of diff do i need i want to swing.slide.and drift but i get confused with the whole check if its shimmed right i dont know what all that means lol can you tell me which one i need or which one you got
I got a cheap ebay one. This is real basic, but when you get the new diff in they usually come with some yellow like transfer grease or whatever it's actually called. You smear that on a few teeth and spin it around and check where the teeth are meshing. IIRC, you want it pretty much centered.
@@SniderTron3000 thanks bro
How long do you think it would take a mechanic to put one in or what they should charge?
Someone who knows what they're doing and takes the time to do it right, maybe 2 or 3 hours? And I was just talking to a guy in Saginaw that said he was quoted $1,300 to have his gears changed and a LSD put in. And he had the parts.
Thanks for the quick reply. So if I have the parts the labor should be under $400?
Awesome video man!! Can you please help me out on this question? So I have a 2000 2wd Silverado with 3:73 gears and with an open diff and I want to upgrade the diff to an lsd like yours. I asked around in my city if they can do this and they all say they will only do it if I change out the whole rear end with one that already has the lsd or a locking diff. I don’t understand why tho?? Is it not possible to change only the diff, since I don’t care about changing my gear ratio?
I have no idea why they would say that. Swapping from an open diff to a limited slip is super common
did you use the factory shims
Going on 2 years, how is it holding up?
No complaints at all. It's held up to a ton of abuse lol
What kind of diff is this ?
Did you have to shim anything? Wish there were more videos on youtube like this. I seen it when it was a fresh video and still I think like 1 guy has posted about it since.
Did I miss where you told us who you purchased the diff from and which diff it is??
Its an ebay diff lol
@@SniderTron3000 That's helpful....
Lol those ebay ones are all so similar. As long as you make sure it fits the 30 spline axles just pick whatever flavor of ice cream you want. If you want something more guaranteed but still budget friendly check out Yukon
Dope asf gonna do this to my ram. Good info💯
Where did you get the limited slip
Is it easier for burnouts?
what diff would you recommend for a obs? currently stock peg legger
Depends on what you want to use it for and what your budget is. I like mini spools though lol
SniderTron 3000 just wanna spin both tires lol got stuck a couple days ago after one wheel fell about 3” from a little curb and the other stayed in the air and had to push it out.. left it in drive lol
I like spools because they're cheap, like $80 or so, and easily installed in like a half an hour on the hoist. Wears the tires a little quicker, but not that noticeable to me
is that what’s going in jack black
Yeah, Jack Black already has 4.10's and before our first day at the track with it we threw a spool in it real quick that I had lying around
How the posi doing? You still running the same one?
No complaints so far. Still holding up. Only issue I've had was a pinion bearing went out past year, but that was unrelated
Aren’t you supposed to wait a while until you do a burnout when installing one of these?(a couple miles)
Probably, but you're also supposed to check preload and backlash lol Neither of which I did
@@SniderTron3000 so just slapped it in ?
@@chrisfelix9209 I put the shims back where they were when I pulled it apart and then just checked the pattern on the teeth and it was close enough for me to not worry about it.
@@SniderTron3000I was all worried about all the to spec stuff. You definitely motivated me to do it .lol just ordered a posi . Thanks man
Technically it was already broke in ? 🤷♂️
Very good
Where can i order one for a 2003 Silverado 4x2
I ordered from Ebay lol
great video is there a link to this product thanks
Do you know where I can get one of these limited slip diffs for a 1995 Gmc Sierra?
SniderTron 3000 no yeah I was wondering where you got the ebay one cause I can’t seem to find one for my truck
Boss Nig you might have to search like "gm 8.5 posi" instead of specifically for your truck, you know?
Amazon $284.99 for limited slip
So no link for the lsd ???? Share with us
what was the brand of the limited slip I need a cheap one for my truck asap
duckman3474 this looks like the same one I got
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F162870459754
lol dogs are going in your truck!!
How are you liking your new dif?
Ezequiel Castanon it's been 3 or 4 months of pretty hard use and it's held up great. No complaints at all so far.
I have a 4.3 will this fit my truck ?
If it has an 8.6, yeah
Where could I get this diff?
You should have done your 15 inch conversation at the same time LOL
Do you have the brand and name of the diff
It's just a cheap eBay knockoff of an Eaton style LSD. I think the one I got was sold by MonkeyGrip or something like that lol
link to the limited slip dif? Also, did you have to shim anything? thanks!
djzomb1 lol I'm gonna get roasted, but its just the $285 "gm 8.6 eaton style" one you can find on eBay. As long as you do like 10 figure 8's in a parking lot to brake it in, it does fine. And, I just put the stock shims back in place and rolled things around to make sure nothing was tol fucked up lol
I figured for $285, if it does blow up in a year, I'm not out that much. I wanted to give it a try.
SniderTron 3000 cool man, thanks for taking time out to answer. Keep truckin!
Hey... Just subbed. So this is a 4.3 right? Bc I bought a 99 and it has disc brakes all around. Do I need a 8.6 with a 30 spline?
Drae2g2 my truck has the 5.3. I'm honestly not sure what axles are under the v6 trucks. I would think GM being cost effective would put the same axles under it as the other 1500 series, but I haven't looked into it.
SniderTron 3000 highly appreciated.
Where did you get the diff
Ebay
Hey man howd you get the bearings on the carrier?
My neighbor has a little press that he lets us use
Torquing down those bolts with an impact seems legit lol
Lol I don't remember specifically what happens but I usually just use the impact to get the bolts all the way in and then torque them down. But, I wouldn't put it past myself to just impact them down lol
Good burn-out
Lol broke in 0-100 real quick 👌
Whats the diffrence between the 8.5 and 8.6
JG3 basically the 8.6's have disc brakes and the 8.5 has drums. And there is a difference between the carrier bearings.
.1
can u put a link of the diff u put in?
Just search Ebay for "GM 8.6 Limited Slip Differential" and you'll find the cheap ones lol
Nice shop . Praise the Lord !
Col. Klink I wish there was less Dale Jr. and more lighting, but it definitely gets the job done lol
What unit is this ?
Ebay
Ey bro could you please tell me the name of your exhaust pipes Thank you very much
In this video its just stock straight piped exhaust. But, the system I installed later on is the Speed Engineering True Dual kit. You'll need long tubes for it though
SniderTron 3000 Thanks bro have a good one
Did you use the same shims when you replaced this? I’ve seen videos that say you need different ones once you change to aftermarket. Just wondering because I’ll be changing mine soon! Great content by the way 👍🏾
Yep, I just put them right back where they came from. It lasted like a year and a half-2 years before the pinion bearing went out before of a different issue.
SniderTron 3000 awesome thank you! I’ll be replacing mine soon, great content man!
@@SniderTron3000you have the part number and where you ordered the limited slip differential for Goldie?
U got a link for the diff
This guy is badass
First time seeing ur videos I'ma fan new subscriber
Ok so I know this is an older video but hopefully you will still respond. Why don't you have emergency brakes?
lol you caught me right in the middle of responding. The lines were cut before I got the truck
Every rear and ive opened up has metal goo on the magnetits normal.
Where did you get the limited slip?
Ebay
how does your cheap post work?
No complaints
how much was it? could you get me a link to the one you own?
It was like $250 or $280. If you search ebay for "GM 8.6 Posi" you'll find it. I think it was the Monkeygrip one
is it like this one.. www.ebay.com/itm/CHEV-GM-8-5-8-6-LIMITED-SLIP-POSI-30-SPLINE-10-BOLT-LOCKER-EATON-CLUTCH-STYLE/151635923198?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908131621%26meid%3D1d20b5900d9646d5bfcc7f9f6013de0d%26pid%3D100678%26rk%3D3%26rkt%3D11%26mehot%3Dag%26sd%3D123356748725%26itm%3D151635923198&_trksid=p2481888.c100678.m3607&_trkparms=pageci%3A1228c18d-c5ea-11e8-82c1-74dbd1801350%7Cparentrq%3A3295e0db1660a9c567026413fff529c6%7Ciid%3A1
That looks like it
clean that dam dif cover
great job,love it
How you set the backlash
Luis Calles Honestly, I didn't. I just put all the stock shims back in the same spots they came from and it was damn near perfect