BEST HYDRAULICS COMPANYS UPDATE 2023 NEW VIDEO IN THE WORKS. 1. HOPPOS ( THEY HAVE THE LARGEST AND WIDEST SELECTION ON COMPONETS AND ALSO MAKE EVERYTHING IN HOUSE) 2. BLACKMAGIC ( THEY HAVE A STEADY SUPPLY OF SQUARE VALVES TO SUPPLY THE MARKET) 3. REDS ( THEY JUST OPENED BACK UP BUT CARRY ADEX AND HAVE GOOD LOOKING EQUIPMENT) 4. HILOW ( THIER CHROME AND GOLD STANDS OUT AND LOOKS GREAT)
Hoppos has amazing customer service, I though about doing a that part in the video but I’ve never bought from CCE so I could not fairly assess the the 3.
I think quality about the same. But now hoppos has in house building of stuff now on most items. And the customer service is fire 🔥 so they I’m the lead. CCE is just basic kits
When i first made the move to switch up my 84 cutty, it was all CCE 3 pump setup 8 front 10 back with 9s marrzachis but the plates an blocks were hyjackers. Served me well about 4 and 1/2 years to really grow and understand the inner workings maintenance and all around aspects of lowriding. 9 years later of crossing states & switch happiness, it has become a frankistine build till recently finally tore the car down to rebuild back up.
Art and Alex are great people and they have been around longer then the other two shops listed in this video. They have invested so much into their shop over the last 3 years they are in a league of their own for sure. Caliber 58 is bad ass, on my my favorite builds since the 2010’s has been El Rey from Elite CC and they also did that setup, but that’s was two shops ago already for Hoppos. I hope to see them continue to progress and innovate 👏🏽
Have already had 2 hoppos set up’s and the last set up, had the pumps painted to look like fennerstones! Looking to get a fennerstone set up this time around from ruanos
That’s so bad ass, Steven is the homie! Next time you talk to him tell him Kiloz said what’s up! I prefer to see setups that have paint, polish/chrome vs a all chrome setup. That’s bad ass, share photos when you get it all in. Tag me on IG 🤙🏾
Hop Shop had one but the price use to be $250 but I’ve seen them has high as $600 now 🫣 Reds was the first to come out with it, then Pro Hopper released theirs one year later.
Afterlife Customs, located in Phoenix, AZ. They have all the parts you need, custom hard-line setups, one of the few full service hydraulic shops in the state. Excellent customer service. Ask for Big J.
I disagree on the gears. Nothing equals a marzocchi. I classify presto with the China junk. Nothing positive or negative on the BMH gears. Everything else is spot on. You do great work. Keep it up.
Marzocchi is hands down the best but a Presto is slightly better then a regular China gear. Italian gears are the shit! When I was in Italy I tried to see if I was close to the factory but it’s northern Italy and I was in southern Italy. Definitely going back, maybe I can check out there factory then 😎 thanks for checking out the video 🙏🏽
Thanks, pesco is a great dog; he’s always with me if I’m working on my car. The hunt is the fun part of lowriding. Pro Hopper did offer a lot of anodized stuff, they offer almost any color you wanted. That’s something that always stood out about their setups to me.
Yea there were a lot of things on the website listed as out of stock. If you follow then on IG they post when they have square valves in and other specialty items. They always suggest to call before trying to place an order. My OGTW cylinders came from Black Magic.
As a teen in the 90's I remember seeing Turtle Walking and Pancaking and See-Saw but haven't seen a lowrider installed that way since then. I don't know why??
That’s because it was a fad, I’m working on video that goes over fads thought the decades. You can still see-saw and pancake you just don’t need 16 switches to do it. Everything can be done with just 4
@@B-Myls individuals car club did it back in the 90’s. It was impressive at the time but yet another fad. People try doing it with Bluetooth remotes but that takes the fun out of hitting the switch in my opinion.
I got mine from MK Garage in LBC but you can go to any of the hydraulics shops and see if they have them. They aren’t really exclusive but they are more then china switch so most kits come with china ones that burn up.
I actually was just out in PHX and meet up with the Photographer OG Volo and he told me about Franks. Next time I'm out that way I'd definitely like to swing by.
I’m a aircraft guy, I have pescos in my setup. For gate setups it’s like Nike vs Adidas vs Reebok; they are all just shoes but what shoes do you prefer. I don’t care who you pick just pick good accessories like good slow downs, motor bands, good dump valves.
I made this video talking about companies who produce hydraulic equipment in house. So things like fab cylinders, mil slow downs and square valves. Franks out of PHX seem to be a great installer but is he fabricating is own setups?
So is there any car that I can put hydraulics on with out taking a body off the frame to wrap it? I am just wanting to hop a little bit no interest In going really high in hopping or 3 wheeling .
Between these 3 I’d personally get everything from Hoppo’s except the dump valves, those I’d go with black magic. One thing I did not mention on this which I feel like I should of looking back is customer service, Hoppo’s customer service is top tier. I like the Adel II’s Ron’s been putting out and they are the easiest to get your hands on. If I was building a gate setup today that’s what im doing. Thanks for checking out my video 🙏🏾
@Kiloz Media appreciate the response. I love lowriders and got a 63 impala and want to get a setup but really didn't know where to begin at. I know what I want it to do but didn't really what setup to get. After your video and a couple others I'm thinking it will be a 3 pump setup. I still got to do research on the other stuff but this has really helped me. Thank you
@@thekingmtmt3873 If you have any questions you can always hit me up im also on IG if that's easier. Also Alex from Hoppos has a lot of good videos out there.
🙌🏽 One Way Hydraulics on Hoover, I’ve reached out to them about stopping by in the past. I see them more as a excelente installer. They aren’t making mass production cylinders or valves. I’m sure they can make one off based on a customers needs. I need to do a series pulling up at hydraulics installers throughout the US, One Way is definitely near the top of that list.
BEST HYDRAULICS COMPANYS UPDATE 2023 NEW VIDEO IN THE WORKS.
1. HOPPOS ( THEY HAVE THE LARGEST AND WIDEST SELECTION ON COMPONETS AND ALSO MAKE EVERYTHING IN HOUSE)
2. BLACKMAGIC ( THEY HAVE A STEADY SUPPLY OF SQUARE VALVES TO SUPPLY THE MARKET)
3. REDS ( THEY JUST OPENED BACK UP BUT CARRY ADEX AND HAVE GOOD LOOKING EQUIPMENT)
4. HILOW ( THIER CHROME AND GOLD STANDS OUT AND LOOKS GREAT)
I'll always shop Hoppos. It's all about that Customer Service.
Hoppos has amazing customer service, I though about doing a that part in the video but I’ve never bought from CCE so I could not fairly assess the the 3.
Definitely hoppos has a better quality and customer service
I think quality about the same. But now hoppos has in house building of stuff now on most items. And the customer service is fire 🔥 so they I’m the lead. CCE is just basic kits
When i first made the move to switch up my 84 cutty, it was all CCE 3 pump setup 8 front 10 back with 9s marrzachis but the plates an blocks were hyjackers. Served me well about 4 and 1/2 years to really grow and understand the inner workings maintenance and all around aspects of lowriding. 9 years later of crossing states & switch happiness, it has become a frankistine build till recently finally tore the car down to rebuild back up.
Hoppos customer service is second to none. The fact that Alex is so willing to help with videos is what decision to buy.
I’ve been a fan of Hoppos for a while. Their custom setups are pretty cool. They did a belt driven setup for 58 caliber.
Art and Alex are great people and they have been around longer then the other two shops listed in this video. They have invested so much into their shop over the last 3 years they are in a league of their own for sure. Caliber 58 is bad ass, on my my favorite builds since the 2010’s has been El Rey from Elite CC and they also did that setup, but that’s was two shops ago already for Hoppos. I hope to see them continue to progress and innovate 👏🏽
Have already had 2 hoppos set up’s and the last set up, had the pumps painted to look like fennerstones!
Looking to get a fennerstone set up this time around from ruanos
That’s so bad ass, Steven is the homie! Next time you talk to him tell him Kiloz said what’s up! I prefer to see setups that have paint, polish/chrome vs a all chrome setup. That’s bad ass, share photos when you get it all in. Tag me on IG 🤙🏾
Hoppos 3 batteries locks up in one hit the best Hydraulics best price best service hands down number one second time customer
I agree 💯
One thing I wish someone would make are the bike cylinders again, even if it's just a small run. Great video G
Hop Shop had one but the price use to be $250 but I’ve seen them has high as $600 now 🫣 Reds was the first to come out with it, then Pro Hopper released theirs one year later.
Afterlife Customs, located in Phoenix, AZ. They have all the parts you need, custom hard-line setups, one of the few full service hydraulic shops in the state. Excellent customer service. Ask for Big J.
I’ve heard of Afterlife Customs a few times, do they manufacture their own parts?
I disagree on the gears. Nothing equals a marzocchi. I classify presto with the China junk. Nothing positive or negative on the BMH gears. Everything else is spot on. You do great work. Keep it up.
Marzocchi is hands down the best but a Presto is slightly better then a regular China gear. Italian gears are the shit! When I was in Italy I tried to see if I was close to the factory but it’s northern Italy and I was in southern Italy. Definitely going back, maybe I can check out there factory then 😎 thanks for checking out the video 🙏🏽
I run hoppos 3 pump set up, great company and alex is very helpful
🙌🏽🙌🏽🙌🏽
Pesco is cute. I am always on the hunt for old setups. Sometimes they pop up really cheap. The old anodized Pro Hoppers are so cool
Thanks, pesco is a great dog; he’s always with me if I’m working on my car. The hunt is the fun part of lowriding. Pro Hopper did offer a lot of anodized stuff, they offer almost any color you wanted. That’s something that always stood out about their setups to me.
I'm shocked that carling switches aren't standard these days. Crazy
All comes down to price, Carling are about $10-15 per where a china switch is $5. These new jacks going to learn real quick when that switch sticks.
@@KilozMedia they'll be wishing they had carling when they burn them armatures up lol
Got to go with hoppos set up but would like to build an all black magic set up one day or hi and low
All 3 are solid companies for sure 👏🏽
I love the BMH stuff but it seems like they are out of stock of everything I need. Thats pre pandamic
Yea there were a lot of things on the website listed as out of stock. If you follow then on IG they post when they have square valves in and other specialty items. They always suggest to call before trying to place an order. My OGTW cylinders came from Black Magic.
HOPPOS ALL THE WAY
As a teen in the 90's I remember seeing Turtle Walking and Pancaking and See-Saw but haven't seen a lowrider installed that way since then. I don't know why??
That’s because it was a fad, I’m working on video that goes over fads thought the decades. You can still see-saw and pancake you just don’t need 16 switches to do it. Everything can be done with just 4
@@KilozMedia What do you think about the wireless connection for the hydraulics?
@@B-Myls individuals car club did it back in the 90’s. It was impressive at the time but yet another fad. People try doing it with Bluetooth remotes but that takes the fun out of hitting the switch in my opinion.
@@KilozMedia Right, there's the saying, "Hit your own switch". I love seeing kids into it!!!
Bmh reds hoppos my 3 done
I agree, I’d also throw hilow in there as well.
miss the old School HiLo set ups
Great reference💯. The switch made in China does not stop the motor🔥. The switch is Panasonic JAPAN.😁
Japanese quality 🙌🏽
Best company is cce hydrualics
Where is the best place to buy the carling switches?
I got mine from MK Garage in LBC but you can go to any of the hydraulics shops and see if they have them. They aren’t really exclusive but they are more then china switch so most kits come with china ones that burn up.
What’s the best brand to go with building a durable hopper anyone got any recommendations
Hoppo's the best longest in the game.
💯 i need to make a updated video that makes sure that point is clear.
2:07 did you say get some carbon switches? My phone speaker is terrible.
Carling switches 💪🏾
Don’t forget Hi-Low and Reds! Hi-Low has always been my go to. Super fast shipping too
I have a video at Reds in LBC and Hi Low been doing their thing. I’m going to have to make a update video for sure.
Southern it’s HOPPOS.!. But, Northern California. It’s Bombscared in Stockton.!.
Or Sergio in Chowchilla.?.
Hoppos is new school and Bombscares is surplus, two different markets.
@kilozmedia did you say carbon switches I'm new and trying to learn my basics
Carling switches are the best
@@KilozMedia thanks bro imma look into those immediately
Dont forget Franks hydros outa PHX cant leave him out. Been doin the shitz for years!!
I actually was just out in PHX and meet up with the Photographer OG Volo and he told me about Franks. Next time I'm out that way I'd definitely like to swing by.
Anyone know of a shop for installs in the north east/DC area?
@@XX-bn3lb checkout @smoot1313uso on Instagram he’s a homie named Ricky with USO car club in the DMV and can get you right.
In your opinion which one is the best to go with
I’m a aircraft guy, I have pescos in my setup. For gate setups it’s like Nike vs Adidas vs Reebok; they are all just shoes but what shoes do you prefer. I don’t care who you pick just pick good accessories like good slow downs, motor bands, good dump valves.
And hops against all em at the hops look it up!! Better ask some!!
I made this video talking about companies who produce hydraulic equipment in house. So things like fab cylinders, mil slow downs and square valves. Franks out of PHX seem to be a great installer but is he fabricating is own setups?
would like to see a look into HI-LO
I’ve been trying to get down to EL Paso, I’ve been on Dallas and Huston a few times this year already. Just need to make my way to El Paso for sure 👏🏽
So is there any car that I can put hydraulics on with out taking a body off the frame to wrap it? I am just wanting to hop a little bit no interest In going really high in hopping or 3 wheeling .
So out of all of those companies, which setup would you choose?
Between these 3 I’d personally get everything from Hoppo’s except the dump valves, those I’d go with black magic. One thing I did not mention on this which I feel like I should of looking back is customer service, Hoppo’s customer service is top tier. I like the Adel II’s Ron’s been putting out and they are the easiest to get your hands on. If I was building a gate setup today that’s what im doing.
Thanks for checking out my video 🙏🏾
@Kiloz Media appreciate the response. I love lowriders and got a 63 impala and want to get a setup but really didn't know where to begin at. I know what I want it to do but didn't really what setup to get. After your video and a couple others I'm thinking it will be a 3 pump setup. I still got to do research on the other stuff but this has really helped me. Thank you
@@thekingmtmt3873 If you have any questions you can always hit me up im also on IG if that's easier. Also Alex from Hoppos has a lot of good videos out there.
@Kiloz Media thank you. I really appreciate it and you got a new sub in me
@@thekingmtmt3873 🙏🏾🙏🏾🙏🏾
What happened to pro hopper?
They are no longer around
What are your thoughts on REDS hydraulics
I was actually at there Long Beach shop yesterday. New video coming Friday
@@KilozMedia koo I'll be in tune on Friday
Is showtime hydraulics still around?
No Showtime disappears around 2005 I believe
One Way Hydraulics in LA. That is the mothership.
🙌🏽 One Way Hydraulics on Hoover, I’ve reached out to them about stopping by in the past. I see them more as a excelente installer. They aren’t making mass production cylinders or valves. I’m sure they can make one off based on a customers needs. I need to do a series pulling up at hydraulics installers throughout the US, One Way is definitely near the top of that list.
All the same just preference
Until you start getting into accessories, basic kits are for the most part 💯 the same .
Bmh and cce are more expensive to ship
That’s good to know, I think I might make a new video going over these newly found facts.
Good shit Kilo 🫡
Peace and blessings to the whole 〽️ family! Appreciate your support for real! 🙏🏽