Thanks for making it look so easy straight to the point no huffing and puffing like a lot of plumbers do and I know I’ve cleaned it thoroughly and happy👍
Brilliant. Just did it. My plumber explained to me very carefully and slowly how to do this and I predictably almost immediately forgot the second he walked out the door so this was invaluable. Thanks!
Hey that is a very concise and informative video. I really like your delivery too. Very helpful . I like the tip on adding inhibitor very helpful for a diy person.
After completing renewing my Valliant diverter valve with support frm yourself, I undertook draining n adding inhibitor. Glad I did it. Spot on again fella.
Thank you for the simple explanation of the important basics and good advice. My filter was installed a couple of month ago. Yes, magnet caught some particles exactly the same way as in your video. In addition there were some flaky stuff at the bottom of the filter. It would not escape on its own while draining filter - had to take the filter of to wash it out. It will be nice if you could add the correct way of removing and placing back the filter canister without damaging the rubber seals.
Excellent, thank you for this thorough explanation in simple not plumber lingo. There are lots of bits to remember though as is the order. My one doesn't have green for on. So how do you know its off?
Good video, did not know the valves could be turned off/on using the spanner fitting, had not noticed it, was just using the valve handles. Also weird place for a boiler/pipes in a bedroom? Looks like a conversion from some other type of room ie airing cupboard to wall knocked through bedroom.
Hi. Excellent video, clear and easy to understand and follow. Whoever installed ours put the top on too tight, I don’t want to apply too much pressure and possibly break tool or worse the cover. Any thoughts on how to solve this. Thanks Stuart Munro
Thanks for the video. Going attempt this soon. The two valves you turn off at the start, they’re really at the back and in a tight corner. I assume you have to turn the two valves off and no other way? Thanks
Just found you on tiktok, your videos are brilliant. I have a Magnaclean fitted but it's the 1st one without the valve underneath. I cleaned mine the other day, first time I have noticed in 10 yrs instead of the gunk stuck to the magnet being black, mine was a brownish colour. Is this rust from the rads, I am thinking of upgrading all the rads soon. Thanks for any advice.
Great video can you please do videos on testing boiler parts like themisters pumps valve for resistance voltage etc.. Great work keep it up and i just subscribed
thanks for the video ! :D unfortunately my valves are not indicated by any way. I turned them the other way then they were , when I try to bleed it out, the water does not stop :D its coming out very slowly but continuously.
Brill video, straight forward to follow & great tips.. 💯🔥 Have you ever installed/seen the cura brass magnetic filters at all.. Seen them on the bes website..
….thanks….this video is like “ dummies guide on how to clean and top up manga clean “ , even I can do this! …got your sub and looking forward to other vids. Love the one how you installed baxi 800 from start to end ( my bros having that installed and enjoyed watching it ). Can you do a vid about what yearly service involves and how long it should take and what they should be servicing and check as I think the eng ripped me off as he disappeared after 10 mins service !.
@@PlumbingDoctors thank you, I tried to do this but the top seems stuck? I closed the valves and opened the pressure valve ( no water came out ) I then tried to open the top but it’s stuck.. any advise please?
@@staceysky9989 you have to use some force it can be quite stiff. Just hold the body of the filter when you twist so you don't disturb the compression nuts
Hi I have the bigger one pro4 sense. , it’s showing a fault still on greens though, so I took it out to clean and it looks like the plastic thing should spin on the magnet metal thing, mine seems to have picked some crap up and worn a ridge on the magnet and the plastic, making it too tight for it to spin, does it spin? 😂
Not a good idea to clean it the customers hand basin, if you drop the magnet it will break the basin. Clean bucket of water. Instructive video though 👍
Salam brother Engineer installed flat panel radiators today, but after even single radiators not working I have a single pipe system Please help me with how to sort out JazakALLAH
The best video on this subject, clearly explained and genuinely helpful for someone with little plumbing experience. Thank you!
Glad it was helpful!
Great video mate, nice and simple. Most videos put the fear up you, making you believe that something might go wrong, but you explain it well.👍
👍👍
Really like your clear voice and explanations and detail.
Thank you kindly!
Excellent tutorial - thank you very much, mate.
Brilliant video, easy step by step instructions and useful tips on how to clean and tighten. Many thanks !!!
Thank you, very clear, concise, & well demonstrated. Great video 👍👍
Excellent! Easily the best and most comprehensive video on how to properly undertake the procedure.
Wow, thanks!
Thanks for this, you take the confusion out of doing the simple jobs others make complicated.
Respect
Agree, explained so well, I’m confident I can now do this, as I’m not plumber.
Thanks for making it look so easy straight to the point no huffing and puffing like a lot of plumbers do and I know I’ve cleaned it thoroughly and happy👍
Huffing and puffing, you're so right. And the double dutch they talk to over complicate everything.
Thanks 👍
Brilliant. Just did it. My plumber explained to me very carefully and slowly how to do this and I predictably almost immediately forgot the second he walked out the door so this was invaluable. Thanks!
lol
Definitely the best video I’ve seen on servicing the Magna Clean Pro 2! Even better than the one Adey make. Cheers mate
The best video on this matter. I lubricated rubber rings as well. Thank you.
Thank you. I know nothing about plumbing but I followed your video step by step and nothing went wrong!
👍🏻
Thanks bro
We need guys like you
Just started my gas serving career
You will get better with time ;l
Hey that is a very concise and informative video.
I really like your delivery too.
Very helpful .
I like the tip on adding inhibitor very helpful for a diy person.
Thanks 😊
Nice one! Very concise and to the point. you didn't mis anything. Thanks for your help.
You're welcome!
Thank you. You made it look so simple.
It is! 👍🏼
Very thorough and useful.
Great video Bruddah, no waffle just simple,.and to the point....
Jazakallah khair bro
Very very helpful. Much appreciated 🙏🏻
Good instruction all covered.thanks,well done.
Thanks
Well explained. Thank you.
You're welcome!
Thank you brother for the easy step by step guide, stay guided/blessed.
You are most welcome
Easy and simple to follow instructions! Thanks bro!
After completing renewing my Valliant diverter valve with support frm yourself, I undertook draining n adding inhibitor. Glad I did it. Spot on again fella.
Good man!!
Masha'Allah, May Allah Subhan'Allah wa Ta'ala bless You & Your Nearest & Dearest for helping others, Aameen.
barakallahu feek
Great video, well done.
Very useful, great video. Maa shaa Allah,,, Brother Doctor 👏👌👍
barakallahu feek
I love your posts always informative and well explained
Top man thank you
Thanks ❤
My go to video whenever I need to do this
✅
Excellent informative video
Glad you liked it
great simple instruction buddy no scaremongering and well explained👍
Thanks! 👍
Thank you for the simple explanation of the important basics and good advice.
My filter was installed a couple of month ago.
Yes, magnet caught some particles exactly the same way as in your video.
In addition there were some flaky stuff at the bottom of the filter.
It would not escape on its own while draining filter - had to take the filter of to wash it out.
It will be nice if you could add the correct way of removing and placing back the filter canister without damaging the rubber seals.
Thanks for sharing
Very informative, thanks.
Professional video keep it up
Yes doctor saab, how are you. Love the video, very concise and accurate 👍🏽
alhumduliah
Great video mate. Will do mine this week.
👍
Excellent, thank you for this thorough explanation in simple not plumber lingo. There are lots of bits to remember though as is the order. My one doesn't have green for on. So how do you know its off?
the position of the lever on the valve
Great little video this, thank you
Our pleasure!
Amazing video thank you, just cleaned my filter and my boiler is no longer kettling
well done]
Very nicely explained well done ma sha Allah
Very clear! Thankyou.
You are welcome!
Very useful info. Thanks
Brilliant video thank you. So we’ll explained 👍👌🙏
My pleasure
Thank you that was very helpful 👍
Fantastic mate. Very informative. Great job👍
Thanks 👍
Nice one there...keep it up brilliant stuff
👍🏽
Nice. Thanks
Most welcome
Good video, did not know the valves could be turned off/on using the spanner fitting, had not noticed it, was just using the valve handles.
Also weird place for a boiler/pipes in a bedroom?
Looks like a conversion from some other type of room ie airing cupboard to wall knocked through bedroom.
Well explained
Hi. Excellent video, clear and easy to understand and follow. Whoever installed ours put the top on too tight, I don’t want to apply too much pressure and possibly break tool or worse the cover. Any thoughts on how to solve this. Thanks Stuart Munro
Make sure you bleed it / remove air from top and then you just have to use the tool to remove with force
Great video buddy...well explained!!
Thanks 😊
Like the way you explained
👍🏽
Thanks for the video pal you explained that in layman's terms ever thought of teaching ? 👍
Thanks! People have said this to me before... maybe in the future 👍
I have baxi solo 2 pf the overheat lamp lights up and he does not want to turn on thanks for any help, pump ok work.
no idea
Thanks for the video. Going attempt this soon. The two valves you turn off at the start, they’re really at the back and in a tight corner. I assume you have to turn the two valves off and no other way? Thanks
yes and you can get tools to help
Great video, thank you.
Your welcome
Excellent video
Just found you on tiktok, your videos are brilliant. I have a Magnaclean fitted but it's the 1st one without the valve underneath. I cleaned mine the other day, first time I have noticed in 10 yrs instead of the gunk stuck to the magnet being black, mine was a brownish colour.
Is this rust from the rads, I am thinking of upgrading all the rads soon. Thanks for any advice.
it would be a good idea to flush your system or add inhibitor
Thankyou. Your video should have more hits.
I appreciate that!
Excellent video for us trainees
Very easy to do.. just remember to check seals if they leak 🤙🏼
&
Only install Adey or Spirotech 💥
Amazing. Thank you
Glad you liked it!
Just a little tip put a bit of silicon Greece on your rubber o rings to stop them pinching and helps for the next time you come to service then 👍
Good man 👍🏻
Do you have a video on what's actually done on servicing a boiler😎👍
Nah i dont bro not yet
@@PlumbingDoctors do one ASAP 😁👍
Many thanks.
Welcome 😊
Good video. Any chance of doing a video on radiators not hearing up fully?
I have another video on Radiators not working - check that out
Great video can you please do videos on testing boiler parts like themisters pumps valve for resistance voltage etc.. Great work keep it up and i just subscribed
Ok i will try! As i love using my multimeter 🔥
brilliant video followed it done our one thanks to your help 10/10
Thanks for the feedback 😊
Do you think i need one of these if I have a calmag in-line filter? Not sure why my system doesnt have one these days
Calmag is usually on the cold inlet this is on the return pipe (if you dont have a filter on the return then yes you should add one)
Thank you!!
You're welcome!
thanks for the video ! :D unfortunately my valves are not indicated by any way. I turned them the other way then they were , when I try to bleed it out, the water does not stop :D its coming out very slowly but continuously.
Excelent how to show the video
Thanks
Very helpful
Thanks for feedback
Great Vid. I have the magnaclean micro 2, is this the same procedure for cleaning?, Cheers.
Yes, it is
Nice video, can you do repair videos as that's what I find more challenging? These are easy jobs.
I have got one on the way soon ;)
Excellent 🌹👍
Did you learn something new?
Easy as that thanks bro
Easy peasy
Can it be installed horizontal
Yes but its not recommended
Brill video, straight forward to follow & great tips.. 💯🔥
Have you ever installed/seen the cura brass magnetic filters at all.. Seen them on the bes website..
Never heard but send a link
how you put the pressure back up and how much
Every boiler is different and 1.5Bar
Thank you brother . May Allah subhanahutaala bless you. Brother how can i contact you .Jazakallah khairan
….thanks….this video is like “ dummies guide on how to clean and top up manga clean “ , even I can do this! …got your sub and looking forward to other vids. Love the one how you installed baxi 800 from start to end ( my bros having that installed and enjoyed watching it ). Can you do a vid about what yearly service involves and how long it should take and what they should be servicing and check as I think the eng ripped me off as he disappeared after 10 mins service !.
Yep the new boilers don't require a service longer than 10-20mins
Gr8 video! How to register with Adey magna clean for 10 year free parts ? Bought it from Mr central heating
with the qr code
@Plumbing Doctors thanks ,
..need to look for the leaflet as I may have thrown it away
Hi 👋
I think vinegar will make fine clean.🛠
Vinegar is best
I’m going to attempt to clean mine today. What was the solution you used? And do I need to use it?
Just water
@@PlumbingDoctors thank you, I tried to do this but the top seems stuck? I closed the valves and opened the pressure valve ( no water came out ) I then tried to open the top but it’s stuck.. any advise please?
@@staceysky9989 you have to use some force it can be quite stiff. Just hold the body of the filter when you twist so you don't disturb the compression nuts
Hi I have the bigger one pro4 sense.
, it’s showing a fault still on greens though, so I took it out to clean and it looks like the plastic thing should spin on the magnet metal thing, mine seems to have picked some crap up and worn a ridge on the magnet and the plastic, making it too tight for it to spin, does it spin? 😂
it should do once clean but not sure
What’s the difference between inhibitor and cleaner ?
One cleans and one protects
Assalam Alikum
Wa alaikum as-salam
Hi, Where I can order rubber for free?
bro where you based
Coventry
Where you guys based ?
Coventry, West Midlands
👍
✅
Waiting for someone to comment about the condense
Why don't you be the first? 😉
Isolation Valves are a nightmare, lid ,a nightmare , I swerve these
Hmmm
Not a good idea to clean it the customers hand basin, if you drop the magnet it will break the basin. Clean bucket of water. Instructive video though 👍
Thanks for sharing
Cant stand these filters, much prefer the Fernox version by far, so much easier.
Nah
Salam brother
Engineer installed flat panel radiators today, but after even single radiators not working
I have a single pipe system
Please help me with how to sort out JazakALLAH