if by error you apply OC settings that would load on windows boot and CRASH, you can impeach MSI AFTERBURNER from loading them by HOLDING the CTRL KEY as the Windows Session is loading. It will stop MSI Afterburner from loading the OC settings and allow you to go fix it ! :)
I have this card, great for 1440p but surprisingly it will play certain games in 4k at 60fps, stock without any overclocks on the wraith prism cooler. My mind is blown at the performance on this card. Cyberpunk runs fantastic at 1440p with DLSS and RTX off. Honestly, RTX in this game to me is subjective and I find that I don't even need it because the details and overall experience are already good enough, without the bugs that are.
The RTX Light Changes how shadows behave.. only reason I whant RTX coz CyberPunks shadows pop up all over the buildings or slide along with you riding... but Freaking hell is CP Rtx Demanding.. 3060ti cant handle it or goes 45 - 50 fps only on one Of RTX options turned on :/
@@loliconenjoyer9770 Every Card is Save to overclock - just the life span will be shorter - so rather than 7 years of working card you might have 5 years.
Asus TUF 3060ti here, I overclocked my gpu with +160MHz core and +1100MHz memory. Temperature max 61°C. No overvolt, just increased power limit and temp limit. Used msi afterburner version 4.6.2. Reaching in game (cyberpunk and warzone) 2085-2115 quite stable with occasionally 2130 on core clock.
Question I’m running same card and 150 cor 1000 MHz, but if I alt tab or change ray tracing to off from on the game crashes and error for direct x come up
@@AMC_Custom_PC I've had to down clock my mobo ram as I've experienced the same. I was running at 3800mhz ddr4 pre overclock gfx, oc gfx still unstable at 3600hz but now solid at 3400Mhz. You running ryzen cpu? It could be totally unrelated to your problem. but I got a lot of stability by doing that to my ram.
I have a TUF 3060 Ti here: 2145 with +215 on the core, and 8000 with +1000 on the VRAM. I also did +50% on the core voltage and maxed the power limit to 108%.
Same GPU, in benchmarks I found the memory performance sweetspot to be +1000, so I used put it to +900 for stability. For core I have a curve where in use mostly +220, and cap of 2070mhz (When I let it jump to 2145 it crashed more often). What really matters though is the frequency in game when power-limited, and in that it's mostly 2000-2070mhz in Naraka Bladepoint. In hundred hours of Naraka the game has freezed a few times, I might have to drop offset another -20, though I don't know if it will make much difference, it has survived +240 in benchmarks and in other games without any crashes. This card has low max power limit 216W, and the cooler is overkill, OC gaming temps are max 58C and the card is whisper quiet.
I have same card but I can’t find the sweet spot. I can get it to run benchmarks like speed way and superposition all day but when playing esp it will crash after a while. I get the “DXGI” error message. I been trying +165and +1100/1000 but still crashes. Then there’s that quiet and performance switch. Does it actually do anything? I haven’t noticed a difference
Card : Asus Dual 3060Ti OC Core Clock : +160MHz Memory Clock : +800MHz Core Voltage : +50MHz Power Limit: 104% Average Temperature : 66C Thanks for this video & asking people to comment their settings, was very useful to start with :)
I mean I don't have that card so I can't say for sure. But from memory, it was a pretty safe overclock. Should it fail, you can always just remove it, lots of good comment about how to not crash on boot under the video. Cheers@gorkman5697
You can get 16gbps OCs that runs worse than 15.5gbps. People need to keep in mind with memory, that just because it's not crashing doesn't mean it's working well. You can have settings were the memory correction kicks in, the games do not crash, but the GPU runs like ass. Worse than stock. Because the amount of work it has to do correcting memory errors causes performance degradation. I can tune a car to use more fuel, and tell it to rev higher, but if it's stuttering along and runs like shit, it's not going to be faster.
WOW! Now I'm using Palit Geforce RTX 3060 nonTI with Amd Ryzen 5, 2600X with 4.1Ghz I can push Core clock +215MHz and Memory clock to 800MHz with 0 Artifacts. It's doing 2055-2130MHz fine and memory 8300MHz , I'm happy with it =)
This post was from 3 years ago but here's what I've managed to achieve today without any sudden issues and nice smooth gaming, 2085MHz on the GPU 16.6Gbps memory with 1087 mV on a 3060 OC edition I think I may have found a gem of chip but I don't know as I've not pushed it past this and I don't think I will
Card: MSI X Trio 3060 Core clock: +60Mhz Memory clock: +400Mhz I can push it further but I don't want to go beyond this really. It's stable, very cool at around 51-60c in pretty much all games and it does what I need it do really! Great video, thanks a lot. Really helped me get where I wanted the card to be.
@@gowsano7138 Hey mate, since this I've upgraded to a 3080Ti so, I don't overclock per se anymore, what I do is I undervolt and overclock the memory, but I keep those overclocks active at all times. If you don't want to do that? You can set up profiles on MSI Afterburner and hot key the profiles if needed.
You was right on the setting 150 on the core and 1100 on memory. Asus TUF 3060ti OC to 2099mhz on core and 8100mhz on memory. It only has one six pin but power limit is 108. And without adding any core voltage to it. Temp are great at 55c on full load. Now time to do my 10600k.. Keep you the good work. Thanks
With exactly the same card and exactly the same settings I got 3922. Funny thing: lowering core voltage to 50% like you did yielded a bit better results than having it at 100%, like it was set before watching this video. Temps were between 64-67 C. If it's in any way important, I overclocked the card via Gigabyte's Aorus software, not MSI. After overclocking with MSI effects were a bit different, usually the score was lower.
+110 core and 1100 memory. Started seeing very minor graphical glitches if i went above 1100 on memory without any crashed. So I'd recommend people to look very closely when ocing memory
I have an Asus RTX 3060 ti KO OC. I managed to get +240 core and +1400 memory with +20 core voltage running stable @ 64c with 75% fan speed. To be honest I’m not sure if I had to stop there. I haven’t even tried to push it further. Single 8 pin allows for 108% Power limit for me. So my core is now 2025mhz and memory is 8400mhz.
Interesting, i need to boost my card because fore the reverbG2 it needs in fact a high end card tomorrow i post the results on this channel , i love this how to overlock footage ✌️👌
I have the Gigabyte Aorus 3060ti Master (no 3070s available and got this at good price). So far have got it up to +150 on core and +1100 on mem. It's not even breaking into a sweat. Considering this comes in at 1800mhz base its doing really well. Reckon will go higher burt will wait and see what other clockers say for this card. No voltage adjustments needed as 12 pin.
Gpu overclocking is so finnicky. I can easily get +100mhz on the core in benchmarks for hours but then go play certain games and have it crash on core clocks any higher than like 30mhz in just 10-30 minutes of playing the game.
inno3d rtx 3060 twin x2 oc ihr just boosted +191 Core + 900 Memory stable :D on 201 and 999 memory was unstable but with easy click just got around 10 fps in games more like horizon zero down or cyberpunk2077 and this help for 1440p/144hz extra fps :D i ended with 2200 Mhz and 8500 memory
Card : Asus TUF Gaming OC 3060 LHR v2 Core voltage: 0 Power Limit: 110 Temp limit: 90 Coreclock: +220 Mem Clock: +1350 PSU: 750 Temps max 60Celcius. Tested with Heaven Benchmark 4.0 and 3dmark Time spy didnt crash no pixels. So far seems stable Res 2k 144 hz. Fan curve is set on factory automatic.
KFA 2 (Galax) 1click oc standad version with the 9mm fans. Just received. For the moment i manage to get an UV/OC profie: - 875mv - 1950mhz on gpu clock - 7850mhz on memory clock - 175W avg comsuption - 65° avg (71°max hit on general gpu temp, 82° on hot spot. Don't know about the vrm cause this card doesn't give this value) Will look beter tomorrow
@@ronlaufer5792 Thats funny cos i started with a 1050 then to 1660 and then to 3060 ti enjoy it my friend itll be an outstanding increase in performance.
After days of finding the sweet for over clocking my Yeston RTX3060ti I’ve managed to get 190 core clock and 1000 memory clock and ever since it has played beautifully only one draw back is that my gpu temps are hitting 82-83c but it’s doable and has not hit 85c
What ive noticed when OC 3060ti eagle is that if u crank max core voltage, it will run into black screen after one week, since its gonna increase temperature from 59 to 64...so my advice would be replace manufacturer thermal pads and paste, amd keep core voltage max 60-75. Tbh for the card i payd 550£,and the performance it gives... It surprised me. Its really worth it. And if u were lucky to get for msrp this card... U r winner.
I have the rtx 3060 aorus oc elite edition I have a oc switch on the side of the card and I get 2132mhz and I don't even have to oc myself if you want to save money get this edition I have and runs just like a rtx 3060ti with more vram as mine has 12gb so glad I have this one
Thanks to you good sir ive been able to get some serious gains.. i was running only +200 on memory but now after following your video i replicated the results, well my memory is stable with +900 now so close enough eh? :D as for core clock, ive got 2080~2100 sometimes peaking to 2125 oh oh i also have +100 on core voltage, so all in all using same benchmark tool as you have; on all high settings i get 117.4 fps avg and 237.8 max fps, my games are now indeed running much better and even seemingly more stable, as in less stutter if i have any in some odd case of a game, eg ME1 Legendary edition remake.. Thanks again! :)
Nice Video!👍Can you (or another one too) say something more about PUBG? You said you have a special profile for it. I do my testing too right now, also with undervolt. But my problem is that my internet connection is not good...because of that PUBG is like a roller coaster in terms of latency, recoil and so on. So hard for me to test, never know if my OC is the problem or just damn connection. Can u tell me more about your experiences? Mine so far, seems that PUBG does not like VRAM OC & undervolt only a little bit...so I undervolted a bit and OC only the core a bit!
Got my MSI RTX 3060 TI Gaming X Trio to 2130MHz and 8251MHz, fanspeed at 70% with a temp of 56 a 57 degrees Celsius. In afterburner I set Core Voltage to +50, Power Limit to +104, Temp Limit to 90, Core Clock +150, Memory Clock +1250, Fan Speed 70. Is this good? :)
Got the same card, I started over clocking and threw in +2000MHz memory and +375 core and dropped the power limit to 90 I did this just for shitz and giggles and I expected it to crash immediately... It did not crash, I was amazed and thought it can't be stable, I ran combustor for quite some time and it did not crash once. This is the greatest piece of silicon I have ever gotten. Stable at 2220MHz core and 8800MHz memory right around 68° with 75% fans. Boy am I happy now
I got 2025 core clock and 9000 memory clock with an undervolt of 962 mv and a temperature never exceeding 58°c for 58% fan on my MSI gaming x. Performance gain of 10/12fps on Valley benchmark, stable frequency, stable voltage for a reduced power consumption. Stock I get 137 score on Valley ungine benchmark and with this setting I get 148 score.undervoltt/overclocking is for me the best way to get a good performance/consumption/price ratio especially in these times of energy crisis. I also tested a classic overclocking, the frequency is unstable the voltage too and for only 2 fps more for also a higher consumption.
@@oriabastosxd Custom fan speeds and +100 core +999 mem and 104% power limit. 35c idle, 68c average full load. been stable for me except ray tracing games can be more sensitive to OCing
I have the same card,i overclocked the GPU to +110 mhz and memory to +500 mhz without adding voltage or power limit wich is only 104% and because of that it will make no difference at all. Unfortunately my vram is SK Hynix and I heard it does not overclock well. One of the poorest 3060Ti implementation on the market , very low oc capabilities,cheap memory,low power limit and poor little 80 mm fans Wich are very quiet but not powerfull enough. Honestly I regret that I was not bought Strix or MSI Z variants or payed extra for a good 3070.
Eagle gigabyte GeForce rtx 3060ti. I did the auto over clock for my core clock and got 165. I put the Core voltage at 100 and memory clock at 2000. I am amazed 😮 hasn’t crashed at all and temp stays at 60ish degrees and only goes up to 75 degrees when playing games. Also capping ur fps with rivaTuner makes it a lot smoother and consistent!
3060 ti Tuf here and I don't understand one thing. After turning on the benchmark (not only this one, it is so in every demanding game), the card immediately enters its increased power limit (215W) and drops the clocks in the range of 1875-1950. Without reducing the voltage, there is no question of any stable high boost. I thought it was standard on one plug, but from what I can see everyone here is getting a high boost. Normally I play on 1980mhz (stable in most games) core, 8000mhz memory on 925mv voltage and i am fine with it, but I'm a bit concerned about this power-limit hit on stock.
guys...i bought gainward ghost NON oc version and pushed it to 18ghz memory!! and +160mhz to core so far , for comparison: stock memory bandwidth is 448GB/s after my oc it reached 576GB thats INSANE!!, ofc tested it through MSI KOMBUSTOR burn in mode with artifact scanner 12h test not any single problem, tempereatures slighlty higher thats all. and hell yeah this card can push out of cuberpunk in 1440p easly 60-70fps on ultra, with 4k is questionable:) but any older titles like rdr2 for example in 4k are easly reaching 60fps!!!this GPU is an absolute monster in its kind! effective speed is something between 3070 and 3070ti gate, but you pushed core way higher than me:P YOUR base core speed is much higher than mine its 1670mhz boosted.
My MSI ventus 2x can be overclocked with +200Mhz core and +1000Mhz memory. No extra voltage and it's stable, the max temp during stress test is around 72 C degree. Is that good?
I'm in the same boat as you with Hynix memory on my Gigabyte 3060Ti OC Pro. I only tried 110 mhz core and 500 for memory with no added voltage or power limit and seems pretty stable in all benches. Did you add some voltage or power for your settings?
Core voltage is a %, it isnt adding any more voltage, it is just adjusting the curve it follows for what voltage at that frequency, at 0% it was hitting 1081, at 50% it was hitting 1081, it didn't add 50mv
i have a gigabyte 3060 ti oc, when im in unique heaven running a benchmark my temp is 80c with fans at auto (80% is), even though i can add 150 core clock it doesnt seem to actually increase the mhz it uses, i did get better performance though.
@@johncaceres4165 Its easy to do, The easy way is just get msi afterburner. Run the stress test at your resolution you'd use during gaming. Go in increments of 40+ on the coreclock during stress test til you see graphical errors, wait 5 minutes between changes, and then for mem. clock do 100+ (this isn't the most thorough way to do it, but it's okay) I put fan speed on max (unless it strains the PCIE slot or Graphics card itself, then 75 pct fan speed works) power limit and temp limit on max w in msi afterburner, and no added voltage. After you see graphical errors go back to your last safe overclock, and go in increments of 10, and for mem clock go in increments of 20, then 10 til you find your max OC w out graphical issues or artifacting.
@@johncaceres4165 You don't simply want to be able to OC just to create artifcating even if it seems minimal, it'll build over the long run, no use causing a minute build in damage to your own GPU overtime. I can run my memclock at 1300+ actually without graphical error, but instead I go for the benefit while keeping it relaxed. So I do 400+ 800+ (also I really won the silicon lottery, my cooling isn't crazy, just good case, and clean setup, but im all air cooling, I don't even budge 32c now under load on all my games with these OC's)
@@emiliosaenz852 hopefully I get lucky too lol, I’m also all air cooling. I have a pure rock 2 from be quiet and a mesh front with 5 intake 3 in front 2 top and one rear exhaust
I'm getting 2160, not tried the memory, it's a founders edition. Not mind blowing but still a good bit better than my 980ti .... those cards where known to be overclocking monsters, that thing boosted to 1367 and like anything above 1425 was a hard crash. That card never, in it's life soft crashed just full on PC crash.
How cool to see you use the same Afterburner Skin! I have a non Ti Strix... It has the 110 Power Limit... Mine is at 29c is that bad? I bought a Kraken Mount to water cool it,.. But maybe it does not need it?
gigabyte eagle OC 3060 TI core +160 = 2150 memory +1250 power limit 110 fans 100% 60 degrees C top Runs stable on warzone. I think I could go higher but I do not want to stress the card too much.
Im running my RTX 3060 Ti TUF V2 OC (LHR) at + 90 core and +800 Memory. Voltage not altered. What's your best OC setting with this card, and gaming FS2020 ?
I did same settings you did, I have rtx3060ti, but with 2 fans. I did same settings and my temp got to 88c which I checked people say is not bad for max usage and my MHz got to 1860 only, but also for some reason my cpu was at 53c and was only loaded on 2%
If your GPU happens to be a Zotac unit then look into replacing the thermal pads as they are not only trash but they may be preventing the GPU from being able to make proper contact with the coldplate. I went from 83c+ stock to 71-72c and with the power limit up from 100% to 110% with my max OC to 75c. With 900mv, Cyberpunk 2077 goes from 58c-60c and that is usually what I run. You can look at the video I did to show how the GPU performs with the new thermal pads/paste but it is for the game Control not Cyberpunk 2077. Hopefully you understand what I am talking about and if not just look into replacing the pads/paste for your card.
I have Asus tuf rtx 3060 ti, mine goes to +180 core clock, mem +1000 mhz ,power limit max, in the game boost to 2070-2100 mhz,depends on the game, but the temperature does not go over 57 degrees,70% fan speed the card has very good cooling.
Hi mate, can you actually keep this oc under heavier stress tests? I have a Asus dual that comes with a slightly lower Power limit (216w vs 230 of yours, if i'm not mistaken) and if i run a modern bench like Superposition or timespy my clockspeed goes down quite a lot since i'm hitting the PL all the time. Currently running 1850@925mv to keep it just under the limit, but quite disappointed in how much this card is limited, do those little extra watts help much?
my friend my 3060 ti card is msi gaming z trio model. it has dual 8 pin inputs but i can choose power limit up to 104. Why can't I choose 110? can you help me?
Is it possible to harm VRAM with +1000-1400 mhz Memory Clock, i heared that VRAM is possible to getting to hot and we cant know the temp of it. ( Palit RTX 3070 Gaming Pro )
hey so im dumbo never overclocked, but ive been shoppin for cards and lookin up benchmarks and found 3060ti gets 57 fps average on total war warhammer 3 and overclocking will get me those extra 3 frames at least to push to 60 right? provided my CPU is good and all obviously.
@@iAdam43 yeah I don’t use an overclock either, not worth it to me. The only time I mess with afterburner is when I mine Bitcoin. This is a really good card for mining.
if by error you apply OC settings that would load on windows boot and CRASH, you can impeach MSI AFTERBURNER from loading them by HOLDING the CTRL KEY as the Windows Session is loading.
It will stop MSI Afterburner from loading the OC settings and allow you to go fix it ! :)
#proTip
No, if you want optimal performance you have to let your GPU sit at 90°C
fucking just had this happen and didnt check comments would've been nice to know lol. had to put a different gpu in and uninstall afterburner
I have this card, great for 1440p but surprisingly it will play certain games in 4k at 60fps, stock without any overclocks on the wraith prism cooler. My mind is blown at the performance on this card. Cyberpunk runs fantastic at 1440p with DLSS and RTX off. Honestly, RTX in this game to me is subjective and I find that I don't even need it because the details and overall experience are already good enough, without the bugs that are.
The RTX Light Changes how shadows behave.. only reason I whant RTX coz CyberPunks shadows pop up all over the buildings or slide along with you riding... but Freaking hell is CP Rtx Demanding.. 3060ti cant handle it or goes 45 - 50 fps only on one Of RTX options turned on :/
is it safe to overclock?
@@loliconenjoyer9770 Every Card is Save to overclock - just the life span will be shorter - so rather than 7 years of working card you might have 5 years.
@@artursobkow2680 ohh, so what abour rtx 3060 for example? Do you know its deffault life time? Thanks for reply
@@loliconenjoyer9770 underclock it
Asus TUF 3060ti here, I overclocked my gpu with +160MHz core and +1100MHz memory. Temperature max 61°C. No overvolt, just increased power limit and temp limit.
Used msi afterburner version 4.6.2.
Reaching in game (cyberpunk and warzone) 2085-2115 quite stable with occasionally 2130 on core clock.
Question I’m running same card and 150 cor 1000 MHz, but if I alt tab or change ray tracing to off from on the game crashes and error for direct x come up
@@AMC_Custom_PC I've had to down clock my mobo ram as I've experienced the same. I was running at 3800mhz ddr4 pre overclock gfx, oc gfx still unstable at 3600hz but now solid at 3400Mhz. You running ryzen cpu? It could be totally unrelated to your problem. but I got a lot of stability by doing that to my ram.
are you not getting Power limited ?
I have a TUF 3060 Ti here: 2145 with +215 on the core, and 8000 with +1000 on the VRAM. I also did +50% on the core voltage and maxed the power limit to 108%.
Same GPU, in benchmarks I found the memory performance sweetspot to be +1000, so I used put it to +900 for stability. For core I have a curve where in use mostly +220, and cap of 2070mhz (When I let it jump to 2145 it crashed more often). What really matters though is the frequency in game when power-limited, and in that it's mostly 2000-2070mhz in Naraka Bladepoint. In hundred hours of Naraka the game has freezed a few times, I might have to drop offset another -20, though I don't know if it will make much difference, it has survived +240 in benchmarks and in other games without any crashes. This card has low max power limit 216W, and the cooler is overkill, OC gaming temps are max 58C and the card is whisper quiet.
I have same card but I can’t find the sweet spot. I can get it to run benchmarks like speed way and superposition all day but when playing esp it will crash after a while. I get the “DXGI” error message. I been trying +165and +1100/1000 but still crashes.
Then there’s that quiet and performance switch. Does it actually do anything? I haven’t noticed a difference
I managed to get +220 core and 1400 memory with no extra voltage and it’s stable and with the fans at 85 and the temps never go above 63
@@jyro5924 ye Ik I am very lucky
Which card do you have?
@@lemon-james gigabyte Oc
damn so you basically overclocked your 3060ti to a 3070
@@ggolden a bit more than a 3070
Card : Asus Dual 3060Ti OC
Core Clock : +160MHz
Memory Clock : +800MHz
Core Voltage : +50MHz
Power Limit: 104%
Average Temperature : 66C
Thanks for this video & asking people to comment their settings, was very useful to start with :)
@Ohayon Almog 50% until 60°C (1150RPM) and then 80% until 85°C (1840RPM)
I mean I don't have that card so I can't say for sure. But from memory, it was a pretty safe overclock. Should it fail, you can always just remove it, lots of good comment about how to not crash on boot under the video. Cheers@gorkman5697
You can get 16gbps OCs that runs worse than 15.5gbps.
People need to keep in mind with memory, that just because it's not crashing doesn't mean it's working well. You can have settings were the memory correction kicks in, the games do not crash, but the GPU runs like ass. Worse than stock. Because the amount of work it has to do correcting memory errors causes performance degradation.
I can tune a car to use more fuel, and tell it to rev higher, but if it's stuttering along and runs like shit, it's not going to be faster.
So how can you know if that happens?
@@butWhyDad benchmarks.
WOW! Now I'm using Palit Geforce RTX 3060 nonTI with Amd Ryzen 5, 2600X with 4.1Ghz
I can push Core clock +215MHz and Memory clock to 800MHz with 0 Artifacts.
It's doing 2055-2130MHz fine and memory 8300MHz , I'm happy with it =)
Just did this overclock myself. my cores are 150 and memory is 1100 - 32 on temps very happy. Cheers for the video
This post was from 3 years ago but here's what I've managed to achieve today without any sudden issues and nice smooth gaming, 2085MHz on the GPU 16.6Gbps memory with 1087 mV on a 3060 OC edition I think I may have found a gem of chip but I don't know as I've not pushed it past this and I don't think I will
Card: MSI X Trio 3060
Core clock: +60Mhz
Memory clock: +400Mhz
I can push it further but I don't want to go beyond this really. It's stable, very cool at around 51-60c in pretty much all games and it does what I need it do really! Great video, thanks a lot. Really helped me get where I wanted the card to be.
hey i have the same card.
core clock 145 mhz
mem = +800
totaly stable temps are pretty good.
Hey man i have a question, when you oc your card do you keep it like that or only oc it when you are playing demanding games?
@@gowsano7138 Hey mate, since this I've upgraded to a 3080Ti so, I don't overclock per se anymore, what I do is I undervolt and overclock the memory, but I keep those overclocks active at all times.
If you don't want to do that? You can set up profiles on MSI Afterburner and hot key the profiles if needed.
150 clock
550 memory on my gtx 1060 3gb
You was right on the setting 150 on the core and 1100 on memory. Asus TUF 3060ti OC to 2099mhz on core and 8100mhz on memory. It only has one six pin but power limit is 108. And without adding any core voltage to it. Temp are great at 55c on full load. Now time to do my 10600k.. Keep you the good work. Thanks
That card is not a 6 pin :0
It’s a 8 pin minimum, they all are. Did you forget 2 pins?
With exactly the same card and exactly the same settings I got 3922. Funny thing: lowering core voltage to 50% like you did yielded a bit better results than having it at 100%, like it was set before watching this video. Temps were between 64-67 C.
If it's in any way important, I overclocked the card via Gigabyte's Aorus software, not MSI. After overclocking with MSI effects were a bit different, usually the score was lower.
what the? you got a score 1500 bigger than mine with the same gpu, how? whats your cpu and your ram? ty
+110 core and 1100 memory. Started seeing very minor graphical glitches if i went above 1100 on memory without any crashed. So I'd recommend people to look very closely when ocing memory
+150 and +1000 here.
about the same also, running+160 core/+1000 memory on an ASUS TUF
I have an Asus RTX 3060 ti KO OC. I managed to get +240 core and +1400 memory with +20 core voltage running stable @ 64c with 75% fan speed. To be honest I’m not sure if I had to stop there. I haven’t even tried to push it further. Single 8 pin allows for 108% Power limit for me. So my core is now 2025mhz and memory is 8400mhz.
I have the 3060 ti rog strix . I got 220 core clock , and mem clock I have 1300. Tested and this scored the highest with both set at these numbers
Hey, I do have same card. Is this OC working good so far for you? What about voltage, power limit, temp limit and fan speed you set?
got our 3060ti to 2085mh and its completely stable... thank you for your help...
Interesting, i need to boost my card because fore the reverbG2 it needs in fact a high end card tomorrow i post the results on this channel , i love this how to overlock footage ✌️👌
I have the Gigabyte Aorus 3060ti Master (no 3070s available and got this at good price). So far have got it up to +150 on core and +1100 on mem. It's not even breaking into a sweat. Considering this comes in at 1800mhz base its doing really well. Reckon will go higher burt will wait and see what other clockers say for this card. No voltage adjustments needed as 12 pin.
Gpu overclocking is so finnicky. I can easily get +100mhz on the core in benchmarks for hours but then go play certain games and have it crash on core clocks any higher than like 30mhz in just 10-30 minutes of playing the game.
inno3d rtx 3060 twin x2 oc ihr just boosted +191 Core + 900 Memory stable :D on 201 and 999 memory was unstable but with easy click just got around 10 fps in games more like horizon zero down or cyberpunk2077 and this help for 1440p/144hz extra fps :D i ended with 2200 Mhz and 8500 memory
Card : Asus TUF Gaming OC 3060 LHR v2
Core voltage: 0
Power Limit: 110
Temp limit: 90
Coreclock: +220
Mem Clock: +1350
PSU: 750
Temps max 60Celcius.
Tested with Heaven Benchmark 4.0 and 3dmark Time spy didnt crash no pixels.
So far seems stable
Res 2k 144 hz.
Fan curve is set on factory automatic.
MSI Rtx 3060ti VENTUS x3 OC LHR
+150 core
+1000 mem
+45 voltage
2000-2050mhz
8000mem
63c at 40% fan speed.
Stable, gained 15fps over factory clock
I was able to clock my Gigabyte 3060ti to 2100Mhz and +1270Mhz on memory without extra voltage, leaving the fan to auto result in about 67 C
KFA 2 (Galax) 1click oc standad version with the 9mm fans. Just received.
For the moment i manage to get an UV/OC profie:
- 875mv
- 1950mhz on gpu clock
- 7850mhz on memory clock
- 175W avg comsuption
- 65° avg (71°max hit on general gpu temp, 82° on hot spot. Don't know about the vrm cause this card doesn't give this value)
Will look beter tomorrow
How does it going?
Looking good
lol when you started talking about your past hardware and then what you wanted to upgrade it sounded like i was hearing myself.
Same... I went from a 2060 to a 3060ti today
@@ponybot NIce. My jump was even bigger though, I went from a 1660 to a 3060-ti last month.
I will go from 1050 to 3060ti
@@ronlaufer5792 Thats funny cos i started with a 1050 then to 1660 and then to 3060 ti enjoy it my friend itll be an outstanding increase in performance.
Great video, what's the wattage of your PSU?
Really helpful and easy guide to overclocking! Thank you very much :)
@@damagedhip1966 no, bought upgrade. Using ryzen 7 5800x × asus trio 3070
msi gaming x trio
+180 core
+1150 memory
40% fan 70C
how high is your core clock? (not only the +XXX clock)
Still working well?
@@mcrevolver6399 I am mining on it so I set -500 core, + 1150 memory, 50% fan 40C max and 130 power limit
@@Akwarium30 Wait. For gaming? . Those settings are similar to mine but for minning. I have the same gpu btw
@@mcrevolver6399 I put it into another pc and I am mining on 1x rtx 3060 ti(hive os)
After days of finding the sweet for over clocking my Yeston RTX3060ti I’ve managed to get 190 core clock and 1000 memory clock and ever since it has played beautifully only one draw back is that my gpu temps are hitting 82-83c but it’s doable and has not hit 85c
What ive noticed when OC 3060ti eagle is that if u crank max core voltage, it will run into black screen after one week, since its gonna increase temperature from 59 to 64...so my advice would be replace manufacturer thermal pads and paste, amd keep core voltage max 60-75. Tbh for the card i payd 550£,and the performance it gives... It surprised me. Its really worth it. And if u were lucky to get for msrp this card... U r winner.
I have the rtx 3060 aorus oc elite edition I have a oc switch on the side of the card and I get 2132mhz and I don't even have to oc myself if you want to save money get this edition I have and runs just like a rtx 3060ti with more vram as mine has 12gb so glad I have this one
Thanks to you good sir ive been able to get some serious gains.. i was running only +200 on memory but now after following your video i replicated the results, well my memory is stable with +900 now so close enough eh? :D as for core clock, ive got 2080~2100 sometimes peaking to 2125 oh oh i also have +100 on core voltage, so all in all using same benchmark tool as you have; on all high settings i get 117.4 fps avg and 237.8 max fps, my games are now indeed running much better and even seemingly more stable, as in less stutter if i have any in some odd case of a game, eg ME1 Legendary edition remake.. Thanks again! :)
Nice Video!👍Can you (or another one too) say something more about PUBG? You said you have a special profile for it. I do my testing too right now, also with undervolt. But my problem is that my internet connection is not good...because of that PUBG is like a roller coaster in terms of latency, recoil and so on. So hard for me to test, never know if my OC is the problem or just damn connection. Can u tell me more about your experiences? Mine so far, seems that PUBG does not like VRAM OC & undervolt only a little bit...so I undervolted a bit and OC only the core a bit!
Gigabyte 3060ti OC edition, running at 2100 MHz core +215, memory is at 8000 +1000..... great video ty.
You earned a sub mate
What game benchmark can you recomend for test oc performance?
3060 Ti FE: +90 core / +800 memory
Gave me an extra 7 average FPS in Shadow of the Tomb Raider
Nice! I'm up to 2000mhz on core and +1000mhz on memory. Undervolted at 875mV, these cards are really flexible.
Got my MSI RTX 3060 TI Gaming X Trio to 2130MHz and 8251MHz, fanspeed at 70% with a temp of 56 a 57 degrees Celsius.
In afterburner I set Core Voltage to +50, Power Limit to +104, Temp Limit to 90, Core Clock +150, Memory Clock +1250, Fan Speed 70.
Is this good? :)
Temp limit should be 80-83 i guess
Got the same card, I started over clocking and threw in +2000MHz memory and +375 core and dropped the power limit to 90 I did this just for shitz and giggles and I expected it to crash immediately... It did not crash, I was amazed and thought it can't be stable, I ran combustor for quite some time and it did not crash once. This is the greatest piece of silicon I have ever gotten. Stable at 2220MHz core and 8800MHz memory right around 68° with 75% fans. Boy am I happy now
I got 2025 core clock and 9000 memory clock with an undervolt of 962 mv and a temperature never exceeding 58°c for 58% fan on my MSI gaming x. Performance gain of 10/12fps on Valley benchmark, stable frequency, stable voltage for a reduced power consumption. Stock I get 137 score on Valley ungine benchmark and with this setting I get 148 score.undervoltt/overclocking is for me the best way to get a good performance/consumption/price ratio especially in these times of energy crisis.
I also tested a classic overclocking, the frequency is unstable the voltage too and for only 2 fps more for also a higher consumption.
Did you use afterburner to undervolt as well?
I just got a Gigabyte 3060 Ti Gaming OC PRO rev 3.0 LHR version. The 104% power limit does seem kind of low. It does have 8+6 pin.
I've got the same gpu. What settings are you using ?
@@oriabastosxd Custom fan speeds and +100 core +999 mem and 104% power limit.
35c idle, 68c average full load.
been stable for me except ray tracing games can be more sensitive to OCing
I have the same card,i overclocked the GPU to +110 mhz and memory to +500 mhz without adding voltage or power limit wich is only 104% and because of that it will make no difference at all. Unfortunately my vram is SK Hynix and I heard it does not overclock well.
One of the poorest 3060Ti implementation on the market , very low oc capabilities,cheap memory,low power limit and poor little 80 mm fans Wich are very quiet but not powerfull enough.
Honestly I regret that I was not bought Strix or MSI Z variants or payed extra for a good 3070.
+175 core clock, +1k mem clock, 65 degrees max, (inno ichill x2)
Yes I have exact same card and it ends up at exact same settings.
Eagle gigabyte GeForce rtx 3060ti. I did the auto over clock for my core clock and got 165. I put the Core voltage at 100 and memory clock at 2000. I am amazed 😮 hasn’t crashed at all and temp stays at 60ish degrees and only goes up to 75 degrees when playing games. Also capping ur fps with rivaTuner makes it a lot smoother and consistent!
Your electric bill gon go crazy
3060 ti Tuf here and I don't understand one thing. After turning on the benchmark (not only this one, it is so in every demanding game), the card immediately enters its increased power limit (215W) and drops the clocks in the range of 1875-1950. Without reducing the voltage, there is no question of any stable high boost. I thought it was standard on one plug, but from what I can see everyone here is getting a high boost. Normally I play on 1980mhz (stable in most games) core, 8000mhz memory on 925mv voltage and i am fine with it, but I'm a bit concerned about this power-limit hit on stock.
i got +150 core and + 1600 mem clock on a zotac twin edge so i was happy very happy with that
guys...i bought gainward ghost NON oc version and pushed it to 18ghz memory!! and +160mhz to core so far , for comparison: stock memory bandwidth is 448GB/s after my oc it reached 576GB thats INSANE!!, ofc tested it through MSI KOMBUSTOR burn in mode with artifact scanner 12h test not any single problem, tempereatures slighlty higher thats all. and hell yeah this card can push out of cuberpunk in 1440p easly 60-70fps on ultra, with 4k is questionable:) but any older titles like rdr2 for example in 4k are easly reaching 60fps!!!this GPU is an absolute monster in its kind! effective speed is something between 3070 and 3070ti gate, but you pushed core way higher than me:P YOUR base core speed is much higher than mine its 1670mhz boosted.
My 3060Ti showing 2115 Mhz. is my Graphics card going die?
Yes it will die and your whole pc will fry, put ice in your case for better cooling
@@ppeez So, i limited to 1980 Mhz, Temp Maximum reaching 77,
And Next i am going to replace my stock cooler soon,
Thanks for the replay
That’s a high temp you should keep it under 70c for me I keep mine at 2050mhz and it stay under 55c if the fans are on
Zotac 3060 ti
Core clock +130 2040-55 mhz
memory clock +1600 8600 mhz
volt 1025 mhz
Power limit 110%
Temp limit 90°c
Temps 60-66°c
custom fan curve (:
Mine topped out at 220 core clock, 1400 memory clock and +10% core voltage with 80% fan speed running about 64 degrees.
evga xc model here, surprised at how well this small card can OC tbh
Same here
@Benxjamxn could you tell me how well go this model in oc? Total mhz? Thanks!
One question please how to handle high idle power draw ? my card eats like 34 w all the time just surfing internet
Me just casually getting 45 degrees on an OC of the msi 3060ti
AORUS GeForce RTX™ 3060 Ti MASTER 8G Overclock memory 16Gbs. It already boosts 2000-2050Mhz out of the box.
I have an aorus rtx 3060 elite 12gb and it goes up to 2035 is that overclocked cus i got it with a pc
scores????
do i need to keep my afterburner running all the time for the tweeks to work or can i close it and my gpu will still be tweaked?
My regular 3060 gigabyte oc hits 2000 without even messing with it. Seems good.
Same!
My MSI ventus 2x can be overclocked with +200Mhz core and +1000Mhz memory. No extra voltage and it's stable, the max temp during stress test is around 72 C degree. Is that good?
That's real good 😁
how many wats your psu?
MSI 3060Ti Trio Z +130 core +750 VRAM. My card has crappy Hynix memory
I'm in the same boat as you with Hynix memory on my Gigabyte 3060Ti OC Pro. I only tried 110 mhz core and 500 for memory with no added voltage or power limit and seems pretty stable in all benches. Did you add some voltage or power for your settings?
i love that overlay please share
When I change my core numbers nothing actually changes.
I know this is a 2 year old video but how do i get/make that RTSS overlay
Core voltage is a %, it isnt adding any more voltage, it is just adjusting the curve it follows for what voltage at that frequency, at 0% it was hitting 1081, at 50% it was hitting 1081, it didn't add 50mv
I get 2055mhz on gpu and +1000 on my ram, temp always around 67-68. So that works great.
i have a gigabyte 3060 ti oc, when im in unique heaven running a benchmark my temp is 80c with fans at auto (80% is), even though i can add 150 core clock it doesnt seem to actually increase the mhz it uses, i did get better performance though.
400+ core clock 1k mem. clock asus tuf 3060 (non ti) with a max temp of 42 C on full fan speed.
It's a mesh front case, airflow is a little less choked.
@@emiliosaenz852 I managed to get my hands on gigabyte gaming oc 3060 (non ti). Do you have advice on over clocking. I’ve never overclock3d before.
@@johncaceres4165 Its easy to do, The easy way is just get msi afterburner. Run the stress test at your resolution you'd use during gaming. Go in increments of 40+ on the coreclock during stress test til you see graphical errors, wait 5 minutes between changes, and then for mem. clock do 100+ (this isn't the most thorough way to do it, but it's okay) I put fan speed on max (unless it strains the PCIE slot or Graphics card itself, then 75 pct fan speed works) power limit and temp limit on max w in msi afterburner, and no added voltage. After you see graphical errors go back to your last safe overclock, and go in increments of 10, and for mem clock go in increments of 20, then 10 til you find your max OC w out graphical issues or artifacting.
@@johncaceres4165 You don't simply want to be able to OC just to create artifcating even if it seems minimal, it'll build over the long run, no use causing a minute build in damage to your own GPU overtime. I can run my memclock at 1300+ actually without graphical error, but instead I go for the benefit while keeping it relaxed. So I do 400+ 800+ (also I really won the silicon lottery, my cooling isn't crazy, just good case, and clean setup, but im all air cooling, I don't even budge 32c now under load on all my games with these OC's)
@@emiliosaenz852 hopefully I get lucky too lol, I’m also all air cooling. I have a pure rock 2 from be quiet and a mesh front with 5 intake 3 in front 2 top and one rear exhaust
Thank you!!
How in the hell did you get your riva tuner to look like that
I'm getting 2160, not tried the memory, it's a founders edition. Not mind blowing but still a good bit better than my 980ti .... those cards where known to be overclocking monsters, that thing boosted to 1367 and like anything above 1425 was a hard crash. That card never, in it's life soft crashed just full on PC crash.
I did a bios mod to 970 and achieved a good 1500 MHz. Good old days
How cool to see you use the same Afterburner Skin! I have a non Ti Strix... It has the 110 Power Limit... Mine is at 29c is that bad? I bought a Kraken Mount to water cool it,.. But maybe it does not need it?
Nice guide.
how can i unlock the voltage, i cant use it in the msi burner? great video very easy to understand
Anyone with the MSI RTX 3060 ti TWIN FAN OC?? Best OC???
i got up to 225 with no problems no crashes no anything i damn near think somethings wrong with it lol im confused why hasnt it crashed out>??
@@georgelacny8833 Wow!! how??? in any game? a can't pass 126 with 1200.
can i know what is your setup?
gigabyte eagle OC 3060 TI
core +160 = 2150
memory +1250
power limit 110
fans 100%
60 degrees C top
Runs stable on warzone. I think I could go higher but I do not want to stress the card too much.
3060 Ti Aorus Elite +150 Core Clock and +1100 Memory Clock still stable.
Is this work on Palit RTX 3060ti Dual (non OC) ? Thanks
which is better rtx 3060ti gigabyte pro oc ver 3,0 or rtx 3070 aorus master ??
3070 Aorus all the way.
Im running my RTX 3060 Ti TUF V2 OC (LHR) at + 90 core and +800 Memory. Voltage not altered. What's your best OC setting with this card, and gaming FS2020 ?
I got a 180 core and 1800 mem
@@leen9081 Any other changes to voltage (up or down)
My 3060ti Founders Edition has 110% power limit.
I can run it OC to 2000mhz clock, +1000mhz on the memory and undervolted at 875mV.
how do you mean undervolted? whats your exact settings in the msi afterburner? did it help you with the fps?
now bench mark it and show avg fps befor and after on a chart. is it even worth it?
What if you flash let's say strix bios on asus TUF or Dual. More overclocking headroom, more power at least
Card: Asus 3060Ti Oc Tuf
Core Clock: 2115
Memory Clock : 7800
Max Temp: 58-61peakingC
Fan: Auto
Max Volt: 1.050v
basically same here. peaking around 60, fans are set to 60
I pushed it to 1750 CORE CLOCK and MEM CLOCK 1100. Temperature 65-70 and fans 60-70%. GAMING OC GIGABITE.
golden chip, lucky dude
Hi, is it possible to change vcore with this card ? I can't with mine (same card)...
How much more FPS have you gotten from overclocking it?
@@redzone420 probably around 3070 performance
@@ayokmschangedhisname4393 Have you overclocked yourself once? Can it really harm the GPU?
I did same settings you did, I have rtx3060ti, but with 2 fans. I did same settings and my temp got to 88c which I checked people say is not bad for max usage and my MHz got to 1860 only, but also for some reason my cpu was at 53c and was only loaded on 2%
I think 88c is not healthy for a videocard that doesn't go above 70 decrees
If your GPU happens to be a Zotac unit then look into replacing the thermal pads as they are not only trash but they may be preventing the GPU from being able to make proper contact with the coldplate. I went from 83c+ stock to 71-72c and with the power limit up from 100% to 110% with my max OC to 75c. With 900mv, Cyberpunk 2077 goes from 58c-60c and that is usually what I run. You can look at the video I did to show how the GPU performs with the new thermal pads/paste but it is for the game Control not Cyberpunk 2077. Hopefully you understand what I am talking about and if not just look into replacing the pads/paste for your card.
My MSI 3060ti 2x ventus doesnt allow me to go over 100% power limit this is weird
i have an OC edition maybe it's beacause of that ...all the other setting i am able to change them
I have Asus tuf rtx 3060 ti, mine goes to +180 core clock, mem +1000 mhz ,power limit max, in the game boost to 2070-2100 mhz,depends on the game, but the temperature does not go over 57 degrees,70% fan speed the card has very good cooling.
Hi mate, can you actually keep this oc under heavier stress tests? I have a Asus dual that comes with a slightly lower Power limit (216w vs 230 of yours, if i'm not mistaken) and if i run a modern bench like Superposition or timespy my clockspeed goes down quite a lot since i'm hitting the PL all the time.
Currently running 1850@925mv to keep it just under the limit, but quite disappointed in how much this card is limited, do those little extra watts help much?
hi got 4.6.4 cannot OC the voltage to 104... only 100
Why add voltage? There is already too much. I use my 3060ti 1995mhz at 931mV (7850mhz memory), and its still power limiting.
my friend my 3060 ti card is msi gaming z trio model. it has dual 8 pin inputs but i can choose power limit up to 104. Why can't I choose 110? can you help me?
Does anyone else have trouble installing this? I get an error about not being able to install C++ redist 2008
How do you have 1950 base when most of not all only have a boost of 1750+-? Am I doing something wrong off the bat?
+1000 Mhz memory clock offset is okey or no on my RTX 3070???
Trying to do this on a Zotac 3060 AMP, non Ti, was wondering what I should look out for?
Hey man I have the same card and was wondering what overclock settings you’re getting? Mine have been all over the place
Is it possible to harm VRAM with +1000-1400 mhz Memory Clock, i heared that VRAM is possible to getting to hot and we cant know the temp of it. ( Palit RTX 3070 Gaming Pro )
GPU: Asus RTX3060 OC 12GB Dual
CPU: Intel Core i7 6700 (non k)
RAM: 32GB (4x8GB) at 2133MHz
Scores:
GPU - 2152 MHz | Core Clock +214 (recommend max. 150)
MEM - 8903 MHz | Memory Clock +1403 (recommend max. 1200)
Volt - 1081mV
Temp - ~64°C
Power Limit (%) - 110
Temp Limit (°C) - 90
Fan Speed (%) - 67
Games:
Minecraft @ 1440p ~70fps (+Shader)
High Settings (Vanilla World - lots of entities)
Arma 3 @ 1440p ~55fps
High Settings (Ultra Terrain & Textures)
DayZ Standalone @ 1440p ~90fps
Highest Settings (Full Server, Chernogorsk)
You can run a Minecraft mod that boosts your FPS by like 600% yes. 600%
@@ryanroff6330 what mod is it tho
hey so im dumbo never overclocked, but ive been shoppin for cards and lookin up benchmarks and found 3060ti gets 57 fps average on total war warhammer 3 and overclocking will get me those extra 3 frames at least to push to 60 right? provided my CPU is good and all obviously.
what does memory clock do
same model of card. Got to +220 core +1000 memory. Can go a bit higher stable but turned it down a just a notch.
Asus dual rtx 3060 ti >> +200mhz on coreclock and 16gbps memory clock..... max temp 72´C ..... it is good?
that temp is fine. I have the same card. Is it still running stable for you?
@@BrandonKyle7 yea its stable...but i am not currently using it
@@iAdam43 yeah I don’t use an overclock either, not worth it to me. The only time I mess with afterburner is when I mine Bitcoin. This is a really good card for mining.
Is 750w gold psu enough for this