I really dont understand why you guys dont have 1 million subscribers because its the best of everything interesting and funny that Dougo guy is a hoot lol thanks Chet you work so hard to make it fun
I can’t use those robot vacuums because I spend more time watching it than doing the other things I’m supposed to be doing instead of vacuuming - just like Chet and Duogo 😂
Guys will weld a small plate at an angle onto the inside of the back wheel of the 9530T to eject the straw out and prevent it from wearing off the paint
It is nice to see how well maintained your equipment is. The inside wash bay is a huge help in keeping the equipment clean. In the 70’s I worked for potato farmers who took care of nothing. The best was one year i was plowing for spring soybeans. The previous fall the combine was left in the field over the winter. When I reached the combine, they moved it over so I could continue plowing, and the left it until July for wheat harvest. I worked for them for 7 years, from community college until I graduated from architecture school. In the summers I worked 70 hours a week, and I made enough money for the school year. And those were good times!
As we all know or have heard, each of us has a "doppleganger" somewhere. Last night I was watchint a 1964 WWII movie called "633 Squadron" and there was DOUG'S doppleganger! Cliff Robertson...check it out Amy, you would be the best judge! 🙂
Thanks for another great video. It was most interesting. The junk pile robot is something else. Most entertaining gadget. Looks like it is trying to clean the floor at least. Better give it a chance. Laughter is good for us. Thanks for showing us junk pile. Good job Eric and Chet for putting the hitch on the back of the combine. Looks good. Nice idea. Brody sure does clean stuff up like you never seen before. Good going Brody. Air bags on trucks and trailers are not fun to replace. Have all the Minnesota salt and road junk all over and in them. Not the easiest job. You and Eric got it done. The shop looks full. Lots of busy projects right now. Thanks for everything Chet. All of you take care and be safe. The Iowa farm boy. Steve.
@@sjbutram life is all about calculated risk. You can put every single piece of red tape and regulation in place and not be able to move or function or complete any task at all, Or you can do it never and assume way too much risk.... reality for most of us lies somewhere in between, where you use common sense so you can still accomplish tasks with some sort of efficiency without too drastic of an injury. I've drilled a million holes, this drill is giant and moving at a pretty slow RPM making large chips that aren't being thrown that fast. The risk just isn't that great. They're at a higher risk wearing clothes operating that thing than they are operating it without safety glasses
Me too! My only concern is that AI mop could get so smart it takes over the shop and turns itself into a weapon against humanity. Look out, Terminator Mop. ☠️
Chet, you started your channel much later than the rest of.them but are totally smoking them in number of views. This is a testament to your awesome dedication.
Just some friendly advice... Start with a smaller drill bit and work your way up... Also with the smaller drill bits, you want to go faster speeds and with bigger bits, you want to slow the speed down a little! Awesome content as usual fellas!!👍👍
I had a thought about when Eric was flipping the knives on the chopper, could he use a small magnet to magnetize the knife which would the magnetize the washers to hold them on the knife so he could tighten the bolt?
You mentioned in the last video you're upgrading planters and have to do some plumbing on it. As much as I like to watch you struggle, do yourself a favor and get some 300 Degree Plumber's Grease. We get ours at Menards. Lube up the hose barb and the inside of the hose and it'll go together really easy. You'll thank me later.
For the next combine you decide to get, you should look into a full set of tracks all around. Try out a set of MUD HOG X-TRACKS for the rear. King of the field......
It is much easier on the drill bits and the user to start with a smaller drill bit and then increase the bit size up. Once there smaller hole is made the bigger bits go thru with ease.
Hi guys. We’ve had one those similar for just over year. It should set or you set boundaries. For carpet the water pads should pickup & it sweeps carpet. Ours does really well on carpet, you shouldn’t have to touch it except keeping it clean.
At the end of our workdays on our farm grandpa always used to say “ I better get home and put the feed bag on before I have a cold dinner and a hot cook!” 👍
Hello Fellas... You have an awesome Cole Mine going... Remember ur little vacuum buddy will continue to improve on a daily basis once you continue to clean the pig pens ok... Patience is a virtue Douglas!!! LOL
Paint top with rhino liner we did that now we aint as bad as yall but we did rhino liner and it helps and I mean the top of the air bag that goes to the frame
Chet mentioned a few vids ago "hey- just got a text from Chris - says he misses the water we order and nothing else" -haha. i'm sure they stay in touch.
By far one of the most entertaining video with Mr. Dougo trying to figure out A.I. Reflecting-all he has to do is remove the rugs and turn the chairs upside down on the table and of course his pre-moistened issue.😂But I do know with The Dream Team and Mr Dougo this machine will be in tip top working order and possibly will be doing it at a greater speed!🎉🏎️🏎️
When using automatic vacuum I move all the chairs out of the way. Cuts the amount of time it needs to run. Shake out the rugs and roll them up. I use them to block where I don’t want it to go.
If that’s the Roborock robot vacuum/mop, depending on the model, you might be able to get the dock that will automatically wash the mop pad and refill the water. For the direction that it travels it will alternate directions if you have more than x1 Cycles
Chet Dougo Eric Broodie great job I don't no about that robot vacum don't think it has a place at the farm so we are going to have to think about maybe the shop it is fun to watch if all you have time to sit around and watch it.
Ours runs so long then goes home to empty & clean out then comes back out again. It does this at least 3 times during a clean. When ours runs it’s usually 2 hours.
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
Use a dab grease on your blades to hold the washers to the blade and they won’t fall when gravity tries to pull them away.
OMG this is the funniest thing watching Doug and Chet with the robot mop is the funniest thing we’ve seen for awhile. Thanks for sharing ❤😂
I thought I was done laughing and here comes Big Swede.."is that your new mop...what's it done so far..3 acres" 😂😂
Everything at Larson Farms is so clean and neat...
Remember Chet, safety glasses for you're eyes!
As a professional craftsman, who at 57 still has all his fingers and eyes, you should always have your PPE on and available.
SMDH.
@@davidclaudy4822 come off it mate. Farmers live in reality. We somehow survived for thousands of years just using common sense.
@@MidwestFarmToys I had a metal splinter in my eye once when I was young and reckless. Never again. That was enough and a bad experience at the Dr’s.
@@davidclaudy4822 what a bummer. I bet it wasn't from a drill press. You can lie, But I bet it wasn't.
@@MidwestFarmToys Why would I lie. Man are you a trusting person. What an attitude to take.
The Big Swede should grow a major Mullet!! Bring it back!!!
I really dont understand why you guys dont have 1 million subscribers because its the best of everything interesting and funny that Dougo guy is a hoot lol thanks Chet you work so hard to make it fun
I could watch Dugo and Chet for hours.
Safety glasses boys!!
No thanks.
Oh man.... laughing so hard about the floor cleaning robot....
Dougo and Chet are a comedy team.....
They have a good relationship for sure
I can’t use those robot vacuums because I spend more time watching it than doing the other things I’m supposed to be doing instead of vacuuming - just like Chet and Duogo 😂
Surprising what will entertain two grown men lol
I agree they are hilarious
Should name it martin jr 😂😂
Yeah. Dugo and Chet are fun to watch and listen too.
Guys will weld a small plate at an angle onto the inside of the back wheel of the 9530T to eject the straw out and prevent it from wearing off the paint
I agree with Eric. NEVER delete a parallel arm, NEVER! I don't care how used it might be.
I would have started with smaller drill bits and worked my way up in size. Much easier.
That’s why the boys is coned no need
@@dill5500 obviously it wasn't working very well at all
Or get a mag drill we all know how to chet likes buying tools. And I'm pretty sure Milwaukee makes a battery-powered one.
@@jacobrobinson175 I have it I fucking love it
@@Farmer1277 prob needs a sharpening
You ever think of drilling a pilot hole take about half the time !
I learned to drill a small hole first then work up to the size I really need.
It is nice to see how well maintained your equipment is. The inside wash bay is a huge help in keeping the equipment clean. In the 70’s I worked for potato farmers who took care of nothing. The best was one year i was plowing for spring soybeans. The previous fall the combine was left in the field over the winter. When I reached the combine, they moved it over so I could continue plowing, and the left it until July for wheat harvest. I worked for them for 7 years, from community college until I graduated from architecture school. In the summers I worked 70 hours a week, and I made enough money for the school year. And those were good times!
When the combos cost 700k you spend a few thousand to maintain and clean a year
As we all know or have heard, each of us has a "doppleganger" somewhere. Last night I was watchint a 1964 WWII movie called "633 Squadron" and there was DOUG'S doppleganger! Cliff Robertson...check it out Amy, you would be the best judge! 🙂
Thanks for another great video.
It was most interesting.
The junk pile robot is something else. Most entertaining gadget. Looks like it is trying to clean the floor at least. Better give it a chance. Laughter is good for us. Thanks for showing us junk pile.
Good job Eric and Chet for putting the hitch on the back of the combine. Looks good. Nice idea.
Brody sure does clean stuff up like you never seen before. Good going Brody.
Air bags on trucks and trailers are not fun to replace. Have all the Minnesota salt and road junk all over and in them. Not the easiest job. You and Eric got it done.
The shop looks full. Lots of busy projects right now.
Thanks for everything Chet. All of you take care and be safe.
The Iowa farm boy. Steve.
18:18 and chet says... ''good thing you are on SALERY huh??? no overtime when, oh well...'' was funny in my head... HAVE A GREAT ONE EVERY ONE!!!
Where are those safety glasses? All three of you guys work so well together. Great minds.
Oh my god get a job.
Convenience First, Safety Second in this Camp LOL
@@sjbutram life is all about calculated risk. You can put every single piece of red tape and regulation in place and not be able to move or function or complete any task at all, Or you can do it never and assume way too much risk.... reality for most of us lies somewhere in between, where you use common sense so you can still accomplish tasks with some sort of efficiency without too drastic of an injury. I've drilled a million holes, this drill is giant and moving at a pretty slow RPM making large chips that aren't being thrown that fast. The risk just isn't that great. They're at a higher risk wearing clothes operating that thing than they are operating it without safety glasses
I like Brody’s new name. Brody Clean! I know you’re happy to have someone that likes to do it!
Have to get a yakum rope so Martin can pull out the roomba if it gets stuck again. Lol
They are yankem sponsored.
Use there code if you buy one.
The bit about the floor cleaning robot is very funny. You should put it other sites as a standalone piece.
Our auto sweeper is named “Hairy”. We have 2 dogs and 4 cats, so he’s covered in hair all the time
That show with Dougo, Chet and Junk Pile was hillarious 🤣
Erick’s ‘sun” streaked hair looks great. The mop saga was funny.
Your right Dugo Happy wife Happy life
Its hard to believe these guys arent even at 400k subscribers. This is the best channel!
Obviously it's not.
I TOTALLY ENJOYED WATCHING THE VIDEO CHET and DOUGO 😊
You guys are just like DOT employees. One machine working and several watching!!
Doug's take on Junk Pile is spot on! Can't wait to see the next installment of JP's adventures.
Me too! My only concern is that AI mop could get so smart it takes over the shop and turns itself into a weapon against humanity.
Look out, Terminator Mop. ☠️
You guys are great. Here I am at 5 am watching your latest video before I head to work.
You need an oil squeeze can. They are great for oiling with the drill press. 👍
Chet, you started your channel much later than the rest of.them but are totally smoking them in number of views. This is a testament to your awesome dedication.
Hey, you got my head lights on again that I sent!!!
They are great!
Father and son entertainment at its best. Get the mop out boys!
Junk Pile is a perfect name, thanks for sharing as always Larson Farms !!
Glad to see I’m not the only one that stands around watching my robot vac clean 😂🤣.
I love jumping on TH-cam and seeing a new video posted by you guys. Always educational and entertaining!
MESSWEAR by
BRODY CLEAN
🧹🧹🚿
Fantastic job keeping the equipment all shined up.
Absolutely amazing that you are home so happy for you ❤❤ prayers for healing
Dougo cracks me up
Gotta keep the wife happy...True statement. The rest of the statement goes...if you dont...somebody else will😮🤣👍🎯✌👀
Always wear safety glasses when using drill press
Safety glasses boys
For what?
You guys keep all your equipment clean and looking good. And that a a real job! Cool video. 👍❤️
Just some friendly advice... Start with a smaller drill bit and work your way up... Also with the smaller drill bits, you want to go faster speeds and with bigger bits, you want to slow the speed down a little! Awesome content as usual fellas!!👍👍
It's amazing what makes great viewing. 😂😂😂
I had a thought about when Eric was flipping the knives on the chopper, could he use a small magnet to magnetize the knife which would the magnetize the washers to hold them on the knife so he could tighten the bolt?
Sure
Ol Brodi needs to be wearing the Larson Farm banana hammock n flip flops while washing those tractors 😂😂😂😂😂😂
Chet Find Sailing Zatara on 58 foot long boat for 8 years looking for the next big rock to visit ----- Perception is every thing
Another great video Chet. Watching Dougo with the robot mop is the funniest.
Need to upgrade to the robotics works great.
You mentioned in the last video you're upgrading planters and have to do some plumbing on it. As much as I like to watch you struggle, do yourself a favor and get some 300 Degree Plumber's Grease. We get ours at Menards. Lube up the hose barb and the inside of the hose and it'll go together really easy. You'll thank me later.
The "where are you" is starting a bit early! Farming doesn't wait young lady!
When they make one like Rosey on the Jetsons I'll buy one!!!
Nothing better than a Dougo & Chet video!
"it's 6:01. I round up", hilarious
For the next combine you decide to get, you should look into a full set of tracks all around. Try out a set of MUD HOG X-TRACKS for the rear. King of the field......
It is much easier on the drill bits and the user to start with a smaller drill bit and then increase the bit size up. Once there smaller hole is made the bigger bits go thru with ease.
Caulk around the hitch plate, keep mud and water out and causing rust.
I don't understand why you wouldn't use a smaller drill bit first and then the bigger one. That's why it keeps doing that chet. Lol
Highly recommended getting the milwaukee whole dozer for drilling larger holes through steel. They are the ticket in my opinion
I bought 1 a couple years ago, it worked so-so in the house until it quit charging. $350 down the drain. Wife was happy for about 5 months.
400k is so close. You will eventually pass them all because you channel is consistent and awesome content. Been with you since 50k. :)
The floor sweeper may work better if you put the chairs on the table and remove the floor mats before each cleaning.
After it cleans around the table pull the chains out from under the table so it can clean under it,works good
TAKE up the rug CHET PLEASE. Reminds me of a LELY cow barn automated alley scraper,check um out might work 😂😂. Thanks everyone!!
When drilling holes that size maybe try starting with smaller bits and working up to the size You want
Mag drill Takes longer to get it out the case than drill a hole
Hi guys. We’ve had one those similar for just over year. It should set or you set boundaries. For carpet the water pads should pickup & it sweeps carpet. Ours does really well on carpet, you shouldn’t have to touch it except keeping it clean.
At the end of our workdays on our farm grandpa always used to say “ I better get home and put the feed bag on before I have a cold dinner and a hot cook!” 👍
That is funny, you and your dad Watching a vacuum cleaner, clean the shop.
Hello Fellas...
You have an awesome Cole Mine going...
Remember ur little vacuum buddy will continue to improve on a daily basis once you continue to clean the pig pens ok...
Patience is a virtue Douglas!!!
LOL
You guys kill me😂 Eric and chet are like brothers.awesome video!
Hey guys you need a mag drill with the annular cutting bits they would have cut through all 3 in 1 minute
Paint top with rhino liner we did that now we aint as bad as yall but we did rhino liner and it helps and I mean the top of the air bag that goes to the frame
Very educational and entertaining channel.. have you heard from Chris since he left for home??
Chet mentioned a few vids ago "hey- just got a text from Chris - says he misses the water we order and nothing else" -haha. i'm sure they stay in touch.
Two grown kids with a new toy
Brodys the man
By far one of the most entertaining video with Mr. Dougo trying to figure out A.I. Reflecting-all he has to do is remove the rugs and turn the chairs upside down on the table and of course his pre-moistened issue.😂But I do know with The Dream Team and Mr Dougo this machine will be in tip top working order and possibly will be doing it at a greater speed!🎉🏎️🏎️
As a prior John Deere repairman, please use your feedhouse stop I have seen the feaderhouse drop to the ground in less than a second
should have went through with a small drill and then step up with bigger drills till the right size
that's a good idea. prewash the floor before the AI self washing gadget. It's like washing dishes before loading the dishwasher
happy wife happy life
Mini Martin 😂. Great entertainment
When using automatic vacuum I move all the chairs out of the way. Cuts the amount of time it needs to run. Shake out the rugs and roll them up. I use them to block where I don’t want it to go.
Ive nevered said this to a guy but thats some good looking hair.....
It is chilly at night here in AZ in the winter time so I got me a BIG SWEEDE hoodie, Sacred Manure I am Pleased with the quality and it sure is warm,
It blows my mind that you don't have a million subscribers already.
Easy to wash the harvest mud out with that spacer gap. Always thinking ahead at Larsen Farms. 😉👍
Love it
You always start with a smaller drill bit and work up to that large of a bit
If that’s the Roborock robot vacuum/mop, depending on the model, you might be able to get the dock that will automatically wash the mop pad and refill the water. For the direction that it travels it will alternate directions if you have more than x1 Cycles
Chet Dougo Eric Broodie great job I don't no about that robot vacum don't think it has a place at the farm so we are going to have to think about maybe the shop it is fun to watch if all you have time to sit around and watch it.
Waiting for the episode where we get a montage of go-pro footage from atop the roomba.
He’s compensating for something with his pliers being bigger 😂
Ours runs so long then goes home to empty & clean out then comes back out again. It does this at least 3 times during a clean. When ours runs it’s usually 2 hours.
Tack the parallel arms together before you drill and then grind them apart when you are done. Makes it easier to keep them all lined up.
Get an Ellis drill press and annular cutters for the big holes.
👍 Thanks 😊
You need to add a pilot hole just larger than the web of the drill bit and your large holes will drill much faster!
Evening Chet!!!