This is AM5 compatible. The product doesn’t list that capability, which is a printing error. The instructions also lack the clarity of this video. The product also does not include the slide switch that controls the color. The female 3-pin LED connector is a poor fit; on my system it fell off while carrying the PC from bench to desk. Maybe an adapter will solve this, or use of the second 3-pin LED header. This video was very helpful and covers some gaps that Corsair neglected.
I bought my PC used and it came with different fans installed on the radiator and they don't have the connectors that are shown at the1:42 mark in the video. Do I have to have those specific fans and connectors in order for the AIO to function correctly?
You mentioned that the new packaging comes with lga1700 support. Can I use this same support in another wc? h150i elite capelix for example, which is my case.
Fala xará! tudo certo? Mano, caso você use processador da Intel, poderia me vender os parafusos da AMD que vem com esse watercooler? Estou precisando deles para montar o meu… valeu demais!
2:20 do you know where I can buy one of these specific cables on its own? I just installed my h100, and I connected that cable direct to the motherboard (Asrock z790 Riptide Wifi) and it works like a charm and the bios software controlls the LEDs fantastically. I've got 3 other separate RGB fans that I want to connect to the motherboard in the same way but I can't figure out where to get that cable from. I don't want to connect them to the corsair hub/USB/controller, the motherboard works great for it and I've got a perfect ARGB header left over for them. Where can I get that cable?
Porque se necesita si o si de un Commander pro o similar para sacarle el maximo provecho? Yo solo tengo el lighting node core de corsair que viene con el gabinete icue 4000x, no se si me sirva pero no creo, que mal por corsair tener que comprar un commander de aprox 50 usd para que sacarle el maximo provecho.
Good afternoon, my motherboard is a z390m gaming and it has the 12v RGB connector, how do I connect my h100 rgb watercooler directly to the board? thanks
@@lopes3969 Fala Fernando, tudo certo? Mano, como voce usa processador da Intel, poderia me vender os parafusos da AMD que vem com esse watercooler? Estou precisando deles para montar o meu… valeu demais!
Hi friend, good morning! Look, I have this liquid cooler, I don't know much about computers, I bought it 4 months ago. The question is that I wanted to know if you could explain to me how to change the RGB, I looked in google for videos, it came out that it is changed by software and the truth is that I can't solve it... But also because it had to be compatible with my motherboard? Might you help me:( From already thank you very much
I don't know if it has to do with what I said, that it came out that it had to be compatible with the motherboard or something like that, but the one I have is an Asus B550-K
Look at your video that you touched a button to change it, the truth is that on my computer it's the cables and so on, I would think that I see that button, but I don't dare to press it in case I do something wrong or I don't know: (
@@valeeen2968 bro you can't change it because there is no arg connector on your motherboard for that you have to buy controller . In video i used that connector just for check. Hope you understand
@@itcarecomputers thank you, my Motherboard MSI z590-A Pro, the sys_fan header located far from CPU socket, and I'm planning to install the radiator at the top of the casing, will it be reach the fan cable to the header sys_fan of the mobo
Fala amigo, tudo certo? Mano, caso você use processador da Intel, poderia me vender os parafusos da AMD que vem com esse watercooler? Estou precisando deles para montar o meu… valeu demais!
@@itcarecomputers Thanks for your answer. My motherboard is a MSI PRO Z690-A WIFI. I have connected the pump's 3-pin cable to the motherboard PUMP_FAN and the two fans to the motherboard CPU_FAN. I can control de speed of fans, but I can´t to controll the speed of pump. The pump is always around 3000 RPM. What do you think?
thanks for confirming that no need to apply thermo paste
This is AM5 compatible. The product doesn’t list that capability, which is a printing error. The instructions also lack the clarity of this video. The product also does not include the slide switch that controls the color. The female 3-pin LED connector is a poor fit; on my system it fell off while carrying the PC from bench to desk. Maybe an adapter will solve this, or use of the second 3-pin LED header. This video was very helpful and covers some gaps that Corsair neglected.
How to change the bracket to am5?
@@DeathClawDCit's the same as am4
The newer model has AM5 compatibility labeled on the packaging
Why are there few videos about this product on the internet?
Because this is outmost
@@smile-iy5xc what
It'd not true water cooler thats why. It builds up moisture from the air and goes through the radiator to the pump
@@NLG_NeverLetGobro what😂 are you good in the head?
@@NLG_NeverLetGo what?
I bought my PC used and it came with different fans installed on the radiator and they don't have the connectors that are shown at the1:42 mark in the video. Do I have to have those specific fans and connectors in order for the AIO to function correctly?
No not need same fan you can install any other fan
whats the button next to the tubes in the radiator?
You mentioned that the new packaging comes with lga1700 support. Can I use this same support in another wc? h150i elite capelix for example, which is my case.
Yes
8:39 what is that cable? and how is it called? 4 pin splitter?
4 pin fans extension cable
U have no ideia how it help me. Thank u
🥰
Fala xará! tudo certo? Mano, caso você use processador da Intel, poderia me vender os parafusos da AMD que vem com esse watercooler? Estou precisando deles para montar o meu… valeu demais!
2:20 do you know where I can buy one of these specific cables on its own? I just installed my h100, and I connected that cable direct to the motherboard (Asrock z790 Riptide Wifi) and it works like a charm and the bios software controlls the LEDs fantastically. I've got 3 other separate RGB fans that I want to connect to the motherboard in the same way but I can't figure out where to get that cable from. I don't want to connect them to the corsair hub/USB/controller, the motherboard works great for it and I've got a perfect ARGB header left over for them. Where can I get that cable?
Tengo h150 pero no se donde va conectado el cable del cabezal de 3 pines
Porque se necesita si o si de un Commander pro o similar para sacarle el maximo provecho? Yo solo tengo el lighting node core de corsair que viene con el gabinete icue 4000x, no se si me sirva pero no creo, que mal por corsair tener que comprar un commander de aprox 50 usd para que sacarle el maximo provecho.
Hello new to AIOs. How do you sync AIO with other branded CPU fans?
why does my pump have a 3 pin female connector?
IQUE ithink
To avoid CPU fan error (not connected). It is kind of a dummy connector.
Great vid, anw how did you change the RGB, Icue didnt work
Thanx : connect wit motherboard argb 3pin and control rgb with motherboard software otherwise buy controller
Is this compatable with a lga 1700
10:50 What is this thing called?
I thought the "devil" knew everything. haha. Joke friend ! it's an rgb controller!
ARGB controller
What pc case is shown towards the end?
Xigmatek Aquarius plus
Can i use different fans in the radiator? The pump will work fine?
Yes you can but Corsair fans are best
Solid aio
You just connected the 3 pin rgb to cooler master but what should I do I do not have a 3 pin rgb connector in my motherboard
@@mwpuneetg buy controller
The pump and fans noise are worse?
what was the room temperature when you did the test
is it compatible with lga1700?
Yes
Is it loud??
Can I install this pump vertically? I don’t have enough clearance between my motherboard and the top of my case to install it there
yes just make sure the pump isn't any higher, vertically (y-axis), then the radiator otherwise you'll get air in the pump which is a big NO NO
Can you please tell me the tube length mate?
0:36 400mm
Hello, does anyone know how many RPM the pump goes at? not the fans, the speed of the pump that moves the liquid.
No idea but my 14700 with no overclocking sits at 32°c Idle with it, if that helps
my motherboard dont have any rgb header.,......can i use this without rgb ?
Then you need rgb controller
@@itcarecomputers i dont want rgb , can i use without rgb ?
why icue does not detect the device? I would appreciate some help. Thnx.
Me too
Good afternoon, my motherboard is a z390m gaming and it has the 12v RGB connector, how do I connect my h100 rgb watercooler directly to the board? thanks
Bad luck you have to buy arbg controller for that or connect with case controller if you have
@@itcarecomputers But how does it work, the watercooler is 12v, the argb is 5v!
@@lopes3969 all connector are 5v argb
@@lopes3969 Fala Fernando, tudo certo? Mano, como voce usa processador da Intel, poderia me vender os parafusos da AMD que vem com esse watercooler? Estou precisando deles para montar o meu… valeu demais!
@@mrpulgarock1000 ola amigo, na verdade esse watter cooler ali era de um cliente, não tenho os parafusos , valeu !
Does this cooler works without iCue software ? Can speeds be controlled in BIOS not in the iCUE. Linux does not support iCUE software.
Pretty sure it'll work, but only in its standard rgb configuration. You won't be able to change any of the lighting.
Mine won’t spin help pls
Tbh you need the cosair fan adapter thay comes in the box that's way to much plugging in that you did
Which processor did you use?
Intel i5 10400 as you can see at 4.30min. 😊
Again coment. I have the rog strix b560 a gaming wifi, en i dont know where put the two cables of the bomb :(
The fan model is sp120 right?
I am not sure it's come with cooler
@@itcarecomputers yeah its sp elite. Btw, can u control the pump speed?
@@manssupar yes from bios
Does it support AM5?
Yes it's support. Cooling Socket Support Intel 1700, 1200, 1150, 1151, 1155, 1156, 1366, 2011, 2066
AMD AM5, AM4
@@itcarecomputers which one should i buy corsair h100 240mm or the deepcool le 500 240mm?
@@Noob_Lord_ go with Corsair
is it compatible with aorus b550 elite ?
@@abrahamjosuepereznarvaez4276 yes it is
But it has tocbe microatx or atx bro?
@@abrahamjosuepereznarvaez4276 it will support AM4 AM5 Socket
can i use it with i7 12700?
if you get the one with new packaging
Hi friend, good morning! Look, I have this liquid cooler, I don't know much about computers, I bought it 4 months ago. The question is that I wanted to know if you could explain to me how to change the RGB, I looked in google for videos, it came out that it is changed by software and the truth is that I can't solve it... But also because it had to be compatible with my motherboard? Might you help me:(
From already thank you very much
I don't know if it has to do with what I said, that it came out that it had to be compatible with the motherboard or something like that, but the one I have is an Asus B550-K
Look at your video that you touched a button to change it, the truth is that on my computer it's the cables and so on, I would think that I see that button, but I don't dare to press it in case I do something wrong or I don't know: (
@@valeeen2968 bro you can't change it because there is no arg connector on your motherboard for that you have to buy controller . In video i used that connector just for check. Hope you understand
Do these come already filled with liquid?
yes, thats why its called all-in-one watercooling👍
@@ligmabowls1230 Niceeeeeeeeeeeeeee
Mi motherboard has 3 pin aRGB connector, but I don't know how I can use RGB mode, It only show Red Color :(
GIGABYTE B450 GAMING X
does it have to connect to usb 2.0
Can i get the name of the ARGB Controller from Cooler Master at 10:50
body, did u find name or link ?
Qual o melhor water cooler esse ou o WATER COOLER COOLER MASTER MASTERLIQUID ML240L V2 ARGB, 240MM, MLW-D24M-A18PA-R2
Helpful video. Thanks! You said this one compatible with lga1700 but i dont see the packaging label for lga1700 can you help me clarify?
In new packaging it's compatible with lga1700.
www.corsair.com/br/en/Categories/Products/Liquid-Cooling/RGB-Liquid-CPU-Coolers/p/CW-9060053-WW
@@itcarecomputers tq!
@pricklyplant0333 is that works for LGA 1700 ?
Will this work for ryzen 9 5900x?
Yes
Whats the modal name of the RGB controller u used?
That controller come with cooler master case. In video it's just for change rgb
Where is Thermal pasta
it already comes applied
is there a software where you can change the lighting of the cooler and fans?
Just form motherboard software
@@itcarecomputers icue?
@@hihoreter5445 no
ICUE software lets you change the color of the cooler lighting. My radiator fans are controlled by the RGB hub on my motherboard.
How much length for each cable radiator fans
400mm
400mm
@@itcarecomputers thank you, my Motherboard MSI z590-A Pro, the sys_fan header located far from CPU socket, and I'm planning to install the radiator at the top of the casing, will it be reach the fan cable to the header sys_fan of the mobo
@@mekanin yes
Amigo, e para ligar os 3 fans de um gabinete, faz como ?
Fala amigo, tudo certo? Mano, caso você use processador da Intel, poderia me vender os parafusos da AMD que vem com esse watercooler? Estou precisando deles para montar o meu… valeu demais!
do you not need to put thermal kryonaut on it?
comes pre applied
best video ever
Great video! It's possible to controll the speed of pump in this model H100 RGB? I have the H100 but I can't.
You can control it with motherboard rgb software if motherboard have 3pin Argb connector otherwise you have to purchase argb controller
@@itcarecomputers Thanks for your answer. My motherboard is a MSI PRO Z690-A WIFI. I have connected the pump's 3-pin cable to the motherboard PUMP_FAN and the two fans to the motherboard CPU_FAN. I can control de speed of fans, but I can´t to controll the speed of pump. The pump is always around 3000 RPM. What do you think?
This is normal, the pump ideally operates at a constant speed.
does this AIO have software???
No you can control with motherboard software
@@itcarecomputers well its a shame, guess its not a big problem
@@itcarecomputers what do you think about this is aio? is it good? I'm thinking to get this aio
Hoy me llega🙏
Does it need to be filled with liquid or is it already included?
its there
because that is not custom cooling
Tnk so much
Prescisa de uma faculdade pra fazer o rgb funciona kkkk
itu remotny sudah dapat ya ?
There is no remote with this liquid cooler
am5 ?
Yeah
Otra vez Intel 👎
can i use it without problems with i5 14600kf?
Yeah you can
ok tx@@parkyoass