Cannot wait for the whole series man, i really liked those machines. Used to have a Philips VG back then, i do not know if any other European manufacturer have joined that Japanese consortium. Keep it UP!
Well done, you got yourself a nice MSX 1. These systems were usualy built really well like you said, and it shows all that was wrong was a disconected cable. The prices of these are just going up and up. I would love to get me a MSX 2 at some stage but I think I'd have to sell the house to be able to afford it ;)
Hi Peter, you're right i guess, MSX 2 prices are sky high and only 'faulty' ones can be found in reasonable prices (maybe), The thing is those to be as faulty as this one :-) so, we can have an easy fix! Cheers mate!
Recently Got One That Was Gonna Get Thrown Out It Has No Issues But It Needs Cleaning Otherwise Fully Functional But Starts Smelling Lole Hot Dust After A While It's Got It's Only Got The RF Cable The Cassette Cable Is Missing But To Test It I Took An Ild Aux Cable With a Broken end Snipped The End Off And Shoved The Wires Int GND Amd CMTIN (found the manual so i knew the pinout) Amd Loaded A Few Games From My Phone But I Am Gonna Start Cleaning it Soon And The Remote Relay Works (tested with MOTOR ON MOTOR OFF) It Was Covered With Dust Otherwise In almost Perfect Condition And Its Got The Clips For The Printer Port
Hey Fixer, thanks for dropping in! Sounds like you did a great job with that cable already! Smell comes over the years when humidity and dust go hand in hand 😀I know how it is ! Thank you for watching and keep it up with saving retro gems!
It is a good thing that can initialize with much less memory detected. Try to re-sit the ram chip/CPU and whatever comes in sockets - then what is left is to replace some ram chips. The best way to test them is "piggy-backing" one-by-one! Thank you for watching!
@@davdav7979 IC132~IC139 (Hitachi HM4864) = main RAM, IC141~IC148 (Toshiba TMM416) = video RAM. It is a good idea to follow this link: www.msx.org/forum/msx-talk/hardware/sanyo-mpc-100-video-output-malfunction?page=2 Or register on the site/forum! Thanks and i hope it works!
@@CyberhugTechnologies I piggybacked all ram ICs (I used C64 RAM ic, they are compatible) but no results. I'll check the traces. Have you got a board schematics?
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
Cannot wait for the whole series man, i really liked those machines. Used to have a Philips VG back then, i do not know if any other European manufacturer have joined that Japanese consortium. Keep it UP!
Mi primer ordenador, año 1985.
❤..! Thank you for watching!..
Well done, you got yourself a nice MSX 1. These systems were usualy built really well like you said, and it shows all that was wrong was a disconected cable. The prices of these are just going up and up. I would love to get me a MSX 2 at some stage but I think I'd have to sell the house to be able to afford it ;)
Hi Peter, you're right i guess, MSX 2 prices are sky high and only 'faulty' ones can be found in reasonable prices (maybe),
The thing is those to be as faulty as this one :-) so, we can have an easy fix! Cheers mate!
Recently Got One That Was Gonna Get Thrown Out It Has No Issues But It Needs Cleaning Otherwise Fully Functional But Starts Smelling Lole Hot Dust After A While It's Got It's Only Got The RF Cable The Cassette Cable Is Missing But To Test It I Took An Ild Aux Cable With a Broken end Snipped The End Off And Shoved The Wires Int GND Amd CMTIN (found the manual so i knew the pinout) Amd Loaded A Few Games From My Phone But I Am Gonna Start Cleaning it Soon And The Remote Relay Works (tested with MOTOR ON MOTOR OFF) It Was Covered With Dust Otherwise In almost Perfect Condition And Its Got The Clips For The Printer Port
Hey Fixer, thanks for dropping in! Sounds like you did a great job with that cable already! Smell comes over the years when humidity and dust go hand in hand 😀I know how it is ! Thank you for watching and keep it up with saving retro gems!
Hello! I have a sanyo MPC-100 but at the blue screen it gives me 143 bytes free only. What I can do?
It is a good thing that can initialize with much less memory detected. Try to re-sit the ram chip/CPU and whatever comes in sockets - then what is left is to replace some ram chips. The best way to test them is "piggy-backing" one-by-one! Thank you for watching!
@@CyberhugTechnologies thanks to you. Which ram IC I have to choose? I have some spare Commodore 64 ram chips....
@@davdav7979 IC132~IC139 (Hitachi HM4864) = main RAM, IC141~IC148 (Toshiba TMM416) = video RAM. It is a good idea to follow this link: www.msx.org/forum/msx-talk/hardware/sanyo-mpc-100-video-output-malfunction?page=2 Or register on the site/forum! Thanks and i hope it works!
@@CyberhugTechnologies thank you :)
@@CyberhugTechnologies I piggybacked all ram ICs (I used C64 RAM ic, they are compatible) but no results. I'll check the traces. Have you got a board schematics?