You can still put the elite torso back on a crotch piece without having to separate the lower torso pieces right? If so, that makes me worry so much less about torso cracking
I see you almost open your hand up pretty good lol easier to pop them from the side towards the waist imo with a razor knife. At least that’s what I find easiest and safest haha
Hey I have a question l. Ok so my Drew McIntyre lower leg/Calf won't go on and I was wondering how I can put it back on I tried water/Blow dryer and it won't go on I don't wanna get a new one tho😭
A safer route I go is to drill a small hole with a manual small drill, then use a cylinder pry tool (like small ice pick tool without sharp edge) to crack it open. Safest way for me. But always, nice customs and content!
Do you just put the legs you want on after. You see I’ve been trying to make a custom Shawn and broke to ultimate’s already. Now I got to get another and try again. The glue is too strong I couldn’t get the torso off at all. By the time I found your bid it was too late. So do you just slip the legs under the torso and will it fit right?
Appreciate you reaching out for help fam I’m always glad to put out some wisdom I’m pretty sure your not the only one with this question. So for the most part yes the ultimate edition torso are compatible (with most legs) and some legs may have a smaller peg where it can’t fit like some Kane legs Brock , some undertakers . Soo i sand down the bottom of the torso till it fits
@@maniafigs so I saw you made a custom Shawn dx that’s what I’m trynna make. Would those legs fit fine without sanding? And the way you crack the figure do you only have to crack the stomach area?
Why is it whenI try this EXACT same steps, I either crack the lower part of the body or the torso just wont come off from the waist / legs unless I break it? I dont get it, Im doing the same thing you are but getting very different results.
Hi I got the wwe summerslam rey mysterio today but the abb crunch is really loose do you have any fix solutions for me please also the side part on the left hand side on the mask is bulging put whereas the right hand side is in nicely
What do I do when the stomach of the torso is now wobbly after removing the whole torso from legs for the ULTIMATE EDITION?? please I need help on this
Idk why but for me your videos have just come up recently....they're a great tutoria.l 👍 and subscribed hopefully that helps get this out there. So ok i was using a hobby knife set, like an exacto. My blades bend and some snap lol you're using a wood carving tool? Seems way stronger.
Great tutorial. I just tried to do it and messed my guy up though. I'm sad about it i got stress marks on the back and couldn't get my new legs to pop in. I tried to follow your tutorial but i messed it all up.
@@maniafigs of really I will look into it I think that the legs I got for this guy had a different length post I can't get it to close over it I feel like it's shorter.
The lower torso should be open enough to go back into place. If you are patient with this method, no damage will occur to the pegs and everything should be tight. If not a tiny amount of super glue should reseal the torso.
Bub, I have a big scar on a finger from opening figures exactly like how you're doing it here, please make sure your fingers aren't in the way when the blade slips, like at 4:50. Eventually you will hurt yourself, get in the habit of not doing that.
This method is so much better than doing under the armpit like others have done! Thank you!!!!
Best torso crack tutorial thus far! Thanks for sharing 🙌🏿
You're so welcome!
This is why Mattel needs to implement swappable legs. AEW toys lets you swap legs easily
This is WAY easier than going in by the shoulder joints. Thanks man!!
Super helpful since there's not a lot of videos like this on youtube
Glad it was helpful!
Man thank you for this other way of doing this. I did my first torso crack through the top and it went great but this is better for the full torso
No problem
You can still put the elite torso back on a crotch piece without having to separate the lower torso pieces right? If so, that makes me worry so much less about torso cracking
Thanks because ima bout to make a elite custom Chris Benoit
How do you prepare the water the time? How long should figures sit in water
What razor/tool do you use for the torso cracking? I tried using an xacto knife on a practice torso but I kept breaking the blades lmao
i think its a wood carving set
Bro your a genius btw where do you get the wood carving tool?
I got it from a dollar tree store
Thanks for the tutorial man
Excellent tutorial man thanks a lot for share your knowledge......Greetings
Can you please tell us what kind of 'sloped' blade you are using? Yes I used a straight blade and did cause some damage to the torso. Thanks so much!
A wood carving tool from dollar tree
I see you almost open your hand up pretty good lol easier to pop them from the side towards the waist imo with a razor knife. At least that’s what I find easiest and safest haha
Great video! I’m going to attempt to do a few.
tbh if i watch more of these i could one day make more customs thanks mainafigs
Can’t wait to see what you got
@@maniafigs same
Hey I have a question l. Ok so my Drew McIntyre lower leg/Calf won't go on and I was wondering how I can put it back on I tried water/Blow dryer and it won't go on I don't wanna get a new one tho😭
Right under the knee
If you can Dm me on Instagram so i can see this
Bro I need to know were u get that exacto
Do you have a video of you putting them back together?
Now put it back together is the question I wanna know and a video I want to see
You ask for it and I’m only here to help
Can you just put torsos right back onto the bottom piece like that too?
A safer route I go is to drill a small hole with a manual small drill, then use a cylinder pry tool (like small ice pick tool without sharp edge) to crack it open. Safest way for me. But always, nice customs and content!
Thank help man, thank you!!!
Glad it helped!
Do you just put the legs you want on after. You see I’ve been trying to make a custom Shawn and broke to ultimate’s already. Now I got to get another and try again. The glue is too strong I couldn’t get the torso off at all. By the time I found your bid it was too late. So do you just slip the legs under the torso and will it fit right?
Appreciate you reaching out for help fam I’m always glad to put out some wisdom I’m pretty sure your not the only one with this question. So for the most part yes the ultimate edition torso are compatible (with most legs) and some legs may have a smaller peg where it can’t fit like some Kane legs Brock , some undertakers . Soo i sand down the bottom of the torso till it fits
@@maniafigs so I saw you made a custom Shawn dx that’s what I’m trynna make. Would those legs fit fine without sanding? And the way you crack the figure do you only have to crack the stomach area?
@@Zaxh01 yes and yea
Why is it whenI try this EXACT same steps, I either crack the lower part of the body or the torso just wont come off from the waist / legs unless I break it? I dont get it, Im doing the same thing you are but getting very different results.
Hi I got the wwe summerslam rey mysterio today but the abb crunch is really loose do you have any fix solutions for me please also the side part on the left hand side on the mask is bulging put whereas the right hand side is in nicely
What tool you use. The flat head?
What size exacto knife do you have?
What kind of knife are you using to crack the torso?
Wood carving tool
@@maniafigs could an X acto knife work?
What do I do when the stomach of the torso is now wobbly after removing the whole torso from legs for the ULTIMATE EDITION?? please I need help on this
I did exactly this and now the arms are crazy loose!
same for me lol
I need help! I want to buy that knife on ebay... Could you help me out please? What should I type to search for it? What's called? Pocket knife?
hey i got the tool from a store called dollar tree near me its a four pack thing its a wood carving tool
This helped man thank you
4:49 almost had a heart attack
lol yea i definitely have scars
Idk why but for me your videos have just come up recently....they're a great tutoria.l 👍 and subscribed hopefully that helps get this out there. So ok i was using a hobby knife set, like an exacto. My blades bend and some snap lol you're using a wood carving tool? Seems way stronger.
Thanks for the support fam and yea it’s a bit thicker last longer in usage and soon i plan on selling ManiaFigs custom kits
Where can I get this tool
What is that tool you use to crack it open called?
Great tutorial. I just tried to do it and messed my guy up though. I'm sad about it i got stress marks on the back and couldn't get my new legs to pop in. I tried to follow your tutorial but i messed it all up.
Sorry to hear that there is a way to remove stretch marks
@@maniafigs of really I will look into it I think that the legs I got for this guy had a different length post I can't get it to close over it I feel like it's shorter.
Can use this stile for ope hbk ultimate?
Is a screwdriver able to work or does that tool only work for torso cracking.
It’s the only tool i use for this method
So what tool is that
I’m still trying figure that out
How are you meant to put and elite torso back on once cracking it??
You dont...
What’s the tool that you use to torso crack?
a wood carving tool
Good video!
do you need to put the ultimate in the water?
Yeah
you need to do a NWO hogan with the tan skin
Chris benoits theme in the backround😂
THE HULK HOGAN MUSIC LOL
How do you put them back on without opening the torso
The lower torso should be open enough to go back into place. If you are patient with this method, no damage will occur to the pegs and everything should be tight. If not a tiny amount of super glue should reseal the torso.
Bub, I have a big scar on a finger from opening figures exactly like how you're doing it here, please make sure your fingers aren't in the way when the blade slips, like at 4:50. Eventually you will hurt yourself, get in the habit of not doing that.
No definitely and i already have 2 scars on my pointer finger
dude almost LOST his hand at the end! ahhhhh
Every day is different this man
How do you remove the boots
Soak in hot water pops right off i have an elite figure break down on my channel as well
Where did you get the tool?
A dollar tree store
do u also just crack the top ? like the top
half of the torso?
Not often unless i have to change the neck peg
@@maniafigs noice!
what figure is this 0:33
Andrade
Man I tried and ruined mine tryna take off lower half sucks
instructions unclear (I put too much pressure) and I now am bleeding all over my bathroom