DIY $3 Survivalist Blowgun from Household Items!
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- Hope you like this simple build and please be careful! I take suggestions on my facebook page of what to build next so please check that out so you can stay updated. See the links below!
Needed Supplies:
$1 :Broom
Long Reach and Pick Up (Grabber)
Cooling Racks
Grabber
3 Pack Wire
Tools:
Pliers
Wire Cutter
PLEASE SUBSCRIBE! :D
STAY UPDATED!
LIKE on Facebook: www.facebook.c...
FOLLOW on Twitter: / greekgadgetguru
FOLLOW on Instagram: / vvmkrwlbwn
SUBSCRIBE on TH-cam: www.youtube.com...
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
Also, your next idea could be to try make it powered by a pump.
Make a way to attach a bike pump and bottle with some sort of valve/trigger. Might make it even more powerful.
If he did that it wouldn't have been a blowgun anymore -_-
And? I never said it would be.
It was an idea to use a now past project in a future one to have more fun.
Even if I did say that, he could easily do it in a way that you chose to have it as a blowgun or pressurised dart gun.
Which is actually what I meant anyway.
AKS or an air compressor
Exactly the same thought, look down at comments POW
Free Bird look at Joerg sprave’s video on how to weaponize a bike pump
Not bad for £3! Awesome video..
Alltimes10 omg
U mek teh video of 10 top trolls online. Many views.
3 pounds equals 5 dollars currently? Hmm.
Robert Corbell $4.50 basically
When you clip the to the correct length to make the point, you can save your self a little bit of fabrication time if you clip the wire at a 45 degree angle instead of clipping it flat, it's mostly in a sharp point, reducing the amount of time you need to grind it.
Good idea!
+Aaron Nelson bow chicka bow wow
that right
I think I would rather use the broom as the blowdart gun and maybe use a kitchen funnel as the mouth piece, and use post it notes and the grill piece for the darts also. Not sure how that would work though, but think it would be better.
@MC Bone TKOR did a video with a laser and what you said lol
The fact that the darts are heavy does NOT make them drop more quickly! Acceleration due to gravity is irrespective of mass/weight. The fact that they're heavy means that they move more slowly horizontally (alternatively a greater impulse (basically a larger force) is required to get them to move at the same speed as a smaller particle). This means that the darts take longer to reach the board, meaning the darts spend longer dropping, so they drop further.
Not trying to knit-pick, just an idea; you could make the dart out of wood (not sure of soft or hard would be better) and use twine to fasten it and it would be a nice weight for accuracy/distance.
I used to make simple darts by wiggling off the metal and eraser piece off a pencil and a sticking a pin needle through the back of the eraser and finally using the metal piece and pliers to clamp a cigarette bud and flaring the end of it. Worked well.
you can also use foam from a pillow . you only use a small piece to create a wind block and use yarn to tie the needle and the foam together. you can also use a paper cone as a wind blocker that just fits into the pipe.
I take apart a rim of a bicycle so I have those spokes and I cut them to desired length. I have a roll of foam that you put in the various chairs, seats, stuff like that. So I take my tube and place it on the foam and just press it and spinning and cut out the perfectly snug fit that makes quite good amount of power. And I just realized that I can just glue it together instead of using electrical tape.
so i guess if i try to rob this guy one day ill be fucked when seeing all those weapons and etc.
Haha yes pretty much
why not rob him at night and use his own weapons against him..... i should really stop telling people how to rob houses
would if he has the hearing of a dog and will wake up when hearing the door creek or the dot so silent thud of shoes. le face will be ( p_q)
Paper darts or plastic bag darts (both use nails for the tip) are easier to make and I think that they work better as they're lighter. Try to make them and see if they work better, Grant Thompson has a good tutorial for the paper darts, they are my favourite type of darts because of the lightness of it.
Nice video man, glad you still upload awesome videos xD
I went to Home Depot and bought 2 packs of little flags with metal stakes and took off the flag part and cut it into 4th then made a duct tape cone and hotglued it onto the end then sharpened it with a Dremel and they work great super accurate and penetrate very well good for small game
Could I use the broomstick from the broom for the barrel?
Its to big for the blow smaller tube is beter for range and power
i once made a blowdart completely with paper and tape, just a tube and some cones as bullets. i put ends of paperclips sticking out of the bullets and filled it with paper and tape for some weight. needless to say, it can release blood.
Great video dude keep it up with the awesome videos
I really liked the video it was totally awesome I'm going to try to make the darts.
i dont mean to put anyone down but this is really shitty compared to the one +thekingofrandom made for $3
Yeah your correct
But Grant Thompson made a Professional one, that requires Professional Materials that you don't get at a Dollar store
if by professional materials you mean a hardware store then yes
I completely agree. ( :
I made one 2 years ago with paper darts and a nail on the end. When i blew it just was going deep into the wood and it shot around 10-30 metres
If you don't have anything you could use to sharpen the tip, you can just cut it at an diagonally. so it will form a point off to the side, its not that accurate but it's real easy to make.
I like these do it yourself videos you should make occasional ones.
Oh and to be honest, you remind me of MacGyver. :-)
Grant Thompson does something fairly similar to this project
Cool well done. MOARRRRRRRRRRR PLZ
If you buy. A cheap broom wouldn't the handle be plastic? I think you can just cut that to size, will it work?
U should put a scuba diver mouth piece or something that maybe Can make ur mouth more comfortable while blowing the tube or to keep the dart from going into ur mouth if u inhale accidentally. It might fit nicely and add extra safety
Can you make a automatic arrow gun. That would be super cool.
And plus, I know your still a student but you should make your own weapon business and sell your weapons and make money.
add a magnet to your blow gun then the dart does not fall out when aimed down also add a barrel making it a double barrel is fun if your in the moodalways fight for the right to keep and shoot a blowgun....
I was wondeing what to do with that old grill I had. I'm making darts!
Can u make a phantom blade in assassin creed unity
yo! it's so cool dude
I am you biggest subscriber ever # awesome.
Never thought of making darts that way
Also do you know how I can make the gun more powerful and accurate (no offense, I meant for longer ranges).
GreekGadgetGuru Try shooting these from you assassins creed poison dart gun. Also try shooting those smoke capsules from it
Bic pen, finishing Nail, black tape. Done!
Make something similar to the L.R.A.D. but handheld small compact or at least something that you can carry in a back pack
Try adding a grill lighter on the end of the gun so you can light the darts on fire as you shoot them
How to make proper darts:
Make a small cone out of paper that fits the barrel and put a nail through the cone and then just put hot glue.I got a distance of 50+meters with these
Subscribed just because of intro xD
Why not use that wire to hold those in place, rather than waste a zip tie, specially if those aren't reusable. Not afford to waste stuff in post in case of zombies accolypce
Blow darts are not ideal in a zombie apocalypse anyway it'll hurt a human but not a zombie.
blazeninja2599 You can hunt small game with it. Tho, you'd need some kind of poison.
aserta why would you Posion the game you would eat
Dru Iglesia en.wikipedia.org/wiki/Blowgun
Ctrl+F type poison
read.
blazeninja2599 sorry didn't recall that, it's been while since my last zombie apocalypse. 😉
Quick question would it work in the assassins creed dart gun
I don't have an angle grinder. Now how much does it cost?
Can you get in truble if someone is going wild and crazy with it??
...
Not at all you'll be given a medal.
I bet the dollar store loves you, lol.
can you use soleder for the top instead of super glue?
Make some of the weapons from Dead Rising 3
You should Try make a mouth pice. It would increase your power. Also use a shorter harder breath.
What watch is that you are wearing?
DAMN!! he makes dangerous shit. I like it
Outstanding!
Nice loving this but you can probably find simpler ammo
Woah! You're darts can penetrate Styrofoam?! That's amazing!!!
Darts would be okay for small birds or squirrel maybe. Make them longer & they will do serious damage.
Tossdart dog?
Aaron Joshua Eh?
I would very hesitant to hunt with these darts, wouldn't make a large enough cut, might work for mice
Sir Gillium Agreed 😎
Those metal darts weigh a ton. Try a short 6 inch bamboo skewer and Post-it’s for the cone with some tape, much much lighter and will go faster and farther.
Are you from Greece?
Gadgetguru is epic
I've done the same idea but instead of using my lungs to blow air I've made a small bike pump and an empty spray can system that holds pressure and it has much more power than this also my darts are much more simple and affective than yours just make a paper cone cut it as the diameter of your pipe to make it air tight then insert a nail in the middle hole then you could stop it with either hot glue from inside or some tape from outside the cone
Sweet vid works great
Use cotton at the end, silent silly simplest way
The tip of caulk tubes work the best, cut them to fit snug then use a nail or screw and poke it through inside out and u have a like for real ass blow gun dart
Can i use the metal pipe from a broom?
Use the arrows for the assasins creed blowgun!!!
cool
Sweet video
Couldn't you use the broom handle, if it was hollow
it looks awesome i will make this soon :)
When you're in the jungle you don't have a wallmart or supermarket on the next corner to get a broom and some wire and all that,
But you are going to find a red cotton tree blossoming some cotton
You are going to find ''printa'' tree hollow tree
But this is your trip so have fun with it
would that kill a rabbit or squirrel?
Better thing to use for darts to catch the air is clear packing tape, stick two pieces together and shape it like a cone around the metal dart, just gotta use the tube to get the sizing right. Far lighter, much better at catching air, and it makes the dart more balanced overall since all the weight is the dart itself.. Used to make them on the street out of street sweeper quills, packing tape, and lawnchair tubing, to kill pigeons and rats for fun. Ahhh, my homeless crust punk days lol
shouldn't use a cut-off wheel for the dremel like that. weakens it and makes it more prone to shattering.
you get two types of dermal disks grinding and cutting I have some of both
why no a peice of pvc and buy cold steels darts which are perfect for 1/2 pvc
Could You keep making gadgets from dollor store they are cool and cheap
Catch valve- air compressor- i think this will work
What is the inside dia of the barrel?
nice blow gun but king of random macks a relly good one
You not showing how you blowing and how much air you need to blow the dart through
can you not just use an old wired hanger for the tip of the dart
Or thick sewing needles
Do a lot of these diy vids plez
are you greek ?
Метёлка даёт возможность. Сделать свинцовый плаксон. И стрелять из пневматики. Как будто бы есть из ружья. Не теряя силу.
you could have gotten the tube for the blow gun from the broom instead of buying a grabber
r u from greece
It is funny how many of his subs think the channel name is GeekGadgetGuru. To all you, it is GREEK, not geek.
loved it
Nice one :D
Those are dangerous ... try making them (the darts) out of paper and train . I used to play with paper darts with my friends (not to hurt each other :)
Nice idea shittest camera angles though can't see what he is doing half the time gives me the shits
Must say that is a lot of work for an extremely poor dart ... way, way to much air pass through and very heavy. A thin paper cone and glue is a much better cone design. A dart shaft with a cotton wrapped stop is far superior, have you tried a cone ? I can send a thin steel sharpened shaft (.062) over a half inch in a tree from 18yds away. It is a pain to pull out even with a good set of pliers !
The darts need to be longer for maximum penetration.
I used to make these at work but way better 😂 instead of it broom dart I would cut the tip off of caulk tubes so they would fit tight like a real blow gun dart and then take a lil nail or screw and put it through the tip inside out obviously lol and they were just as good as any store bought, even better when I would use the air compressor with a air gun for lungs 😂😂😂 then it became like really lethal 🤣
Hey, you should do something with a deodorant bottle, like a taser or hidden blow dart idk hhahah. -Semper Fidelis Subscriber
Ben Vilaysack I don't think I can find enough parts from the dollar store to make a stun gun. I'm trying to keep it pretty constraint to things the average person can buy and find. I suppose the parts of a disposable camera could work.
GreekGadgetGuru Maybe an airgun with any pressurized bottle like a deodorant?
GreekGadgetGuru yess plz
GreekGadgetGuru or a cannon. You could ignite deodorant and it would expand so that dart would fly out of the tube.
good video
how can I make the darts lighter
PLZ make a homemade gun with simple objects!
A homemade gun? Whatever would you be wanting that for haha. It's pretty simple to do if you understand the basic mechanics of a gun. Especially a shotgun. That is painfully easy.
Yes... Let's all make shotguns
Shotguns
Everyone make shotguns
They're easy to make accordingly
if you don't have a dremel you can us a peice of a4 copy paper or a peice of paper from a notebook
Is it sad that I can look at your parts list and know you went to Dollar Tree? LMAO
Maybe haha
He said these were dollar store items haha cx
Sure, but which of the many dollar store chains? :-)
Would these kill someone
jawsh227 if the point was a bit longer and had way more power and it hit the heart. Yes
if you poised the tip yes
Matters on strength of lungs
Does this man realize he could be Batman?
It seems like it takes almost to much effort than I wan't to put into making a blow gun. I'l stick with grant Thompsons idea.
Hey I'm bored let's go to the Dollar Store and get parts for a blow gun.
for four dollars you could use the broom stick
aaaaaaaaaaaaaand.....subscribed.
what? that was so dumb
FueledByCookiezGamin I love it when people with ZERO uploaded videos posts a negative comment. You're purpose is what? Be a troll? Well enjoy!
GreekGadgetGuru You know what, you're right. That was mean but this channel was headed in such a good direction. I always saw your channel in the trajectory of the likes of AnselmoFanZero. Your builds before had potential. You need to revisit some of your previous builds and improve upon them e.g. more compact, more efficient, sleeker/cleaner if you get me.
Your thing was always weapons right?
-Ever tried to fit a potato pistol into a bb gun?
-You never finished the idea of the assassin's creed hidden blade with the OTF switchblade.
-You've hardly played with electronics such as servos, circuits, motors, arduino...
-Ever heard of a coil gun? Learn the concept and if you're kinda stuck. I might be able to help you. if not, there's always google.
-Wrist-mounted Coil gun? Wrist-Mounted potato gun?
-Have you tried hydraulics?
-Ever seen that "Mini-foldable crossbow"? Make one of those but out of brass tubing or something and make it actualy as big as a crossbow.
Finally, I do have videos made 2 years ago. They're unlisted but i'll send you a link if you really want.
FueledByCookiezGamin Thanks for taking time to give me some constructive criticism. I know exactly what you're saying.
It was never intended to be a weapon channel. I wanted to build things that people could find useful, kinda like life hacks. See my video from way back on the Guitar Tuner Amp Transmitter, idk. But my 2nd video on the Ballistic Knife went super viral with the release of COD Black Ops and people wanted to see more weapons. I'm still a student, not an engineer either. I'd like to someday do a Kickstarter or be a product designer/innovator. Also, I get bored easily, working on the same project is a drag.
So I do lack some of the skills. I could learn on my own time. I'm planning on using some online videos because school is so expensive and I don't want to take a college class to learn something that that could take like 2 hours tinkering with an arduino and servo.
The refined look is very expensive. Thats why AnselmoFanZero sells his stuff privately. I'm original in my own way. These easy builds are for everyone who can't afford expensive tools and equipment.
+GreekGadgetGuru I have a few ideas for you, they are relatively straightforward and simple considering what the are, but they are considered firearms, since you are underage and I do not know what your state's firearm laws are, would you feel comfortable with building a zip gun (a very advanced zip gun)
Sincerely: a long time fan
PS: sorry for any spelling mistakes English is not my native language
You are doing it wrong, my type of ammo can penetrate a whole 1 inch board on both sides. Its simpler too, just paper, a nail and hot glue gun
OK KingofRandom
G3AR - 'GreekGadgetGuru' how did you know hahaha
may get to heavy with solder