TRX4 Suspension Flex Kit

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 ก.พ. 2022
  • To get more articulation out of the TRX 4 front suspension, I installed a suspension FLEX kit for more droop and more travel on the front axle. www.thingiverse.com . • TRX 4 Shock Towers VS ... check out my video on the rear suspension setup. At Boris Worx, we focus on RC Crawling, 3d Printed, RC Accessories and Surfboard videos.
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 55

  • @michaelchoate2810
    @michaelchoate2810 7 หลายเดือนก่อน

    I think they'd go great on my new I jora beadlocks for my ascent.

  • @Surferslocker
    @Surferslocker 2 ปีที่แล้ว

    Good adaptation and budget friendly. Nice one.

  • @rccrazy7495
    @rccrazy7495 ปีที่แล้ว +1

    Hey great video man.. What a difference this system made..But it gives more body roll at high speed (I have a two speed trans) one of my Broncos The 2021.. But I like the way it handles crawling ill probably leave it for awhile then adjust accordingly.
    Thank you for your time and for the video.

  • @88COLIN88
    @88COLIN88 ปีที่แล้ว

    These would be perfect for my new TRX Build

  • @reallyisitjustme
    @reallyisitjustme 2 ปีที่แล้ว +3

    Very interesting, are there any negatives to doing this? It would have been nice if you had done a before video over a simple obstacle such as a brick or a flex track.

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว +2

      negative part I found was at high speed the set up is a bit to soft, other that just make sure the rods are free and you have free moving articulation. Enjoy your Rig

  • @sparkysworld6768
    @sparkysworld6768 2 ปีที่แล้ว

    Phenomenal flex! Install video was a bit lengthy. If the tires are 2.2 I would use them on the beadlock rims I just ordered.

  • @the_reaper307
    @the_reaper307 2 ปีที่แล้ว

    Love those tires!

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว +1

      Me too! You are in the final draw

  • @danweiss4928
    @danweiss4928 2 ปีที่แล้ว

    I have seven grandkids that I have bought used RC trucks for. Rebuilt them. To keep my grandkids off their electronics. And get them outdoors enjoying life. And we always need extra shoes to keep things rolling. Good luck to all !!

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว

      That's a great idea! Right on your in the final draw

  • @terryhinman9560
    @terryhinman9560 2 ปีที่แล้ว

    Those tires would look amazing on my classic bronco

  • @Braindog
    @Braindog 2 ปีที่แล้ว

    Nice Tips and Setup. I will build me an Low CG Crawler with a Enduro Builders Kit 2. For that i need those Krawler Tires ^^ Thx

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว +1

      ok I will put you in the final draw

  • @ashcod69
    @ashcod69 2 ปีที่แล้ว +1

    Great tires.....little out of my price range unfortunately.....my wife says be patient.....as for the flex kit....fantastic.....more to the bucket list...👍😁

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว

      I understand, but you are in the final draw to win the tyres

    • @paulschryer9571
      @paulschryer9571 2 ปีที่แล้ว

      @@borisworx9199 - "What" tires !!!???? ...🤔

  • @kittolson9473
    @kittolson9473 2 ปีที่แล้ว

    Great video. What roof rack are you using? Thanks

  • @cesarramos8879
    @cesarramos8879 2 ปีที่แล้ว

    Original adaptación , perfecto 4x4 strong 👍👍👍👍

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว

      gran flexion en la suspension

  • @edwardchidester483
    @edwardchidester483 2 ปีที่แล้ว

    Awesome Video. Learn Something new everytime. I am a owner of two TRX4 Sports and would like some new Tires.

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว

      Right on your in the final draw

  • @Surferslocker
    @Surferslocker 2 ปีที่แล้ว

    Oh yeah, and I would use the tyres to crawl around my local sandy hills, I need the extra grip 😎

  • @robertpaterson5172
    @robertpaterson5172 2 ปีที่แล้ว

    Those tires would do wonders on my phoenix build

  • @garybetancourt4137
    @garybetancourt4137 2 ปีที่แล้ว

    They would look perfect with my Vanquish Phoenix Body on my TRX4 21 bronco chassis

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว

      ok cool you are in the final draw

  • @verbalassassin16
    @verbalassassin16 ปีที่แล้ว

    666 subscribers .. the odds of that !

  • @aaronharris4364
    @aaronharris4364 2 ปีที่แล้ว

    The proline set up would be better than all the Amazon crap I have bought that has made my performance worse

  • @royherrera6397
    @royherrera6397 ปีที่แล้ว

    Will this work with the Traxxas lift kit??

  • @joshuacollins9855
    @joshuacollins9855 ปีที่แล้ว

    Stock trx4 tires have tear and dont have the money to replace at the moment

  • @overriot5617
    @overriot5617 2 ปีที่แล้ว +1

    not to be rude but it's called a track bar at lest on real vehicles but it would make more sense if u just said track bar. were can I get the flex kit

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว +1

      hi yes it is also called a track bar. You can find it on thingiverse.com

  • @tonylai77
    @tonylai77 2 ปีที่แล้ว

    Tires for looks. Nice video.

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว

      Thanks 👍 Right on your in the final draw

  • @jimmygreen711
    @jimmygreen711 2 ปีที่แล้ว

    I need them for an old rig with stock tires that are very worn

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว

      Right on your in the final draw

    • @jimmygreen711
      @jimmygreen711 2 ปีที่แล้ว

      @@borisworx9199 thank you

  • @kennethp1152
    @kennethp1152 2 ปีที่แล้ว

    Is that a part you can buy or is something you have to print. I Dont have access to a 3D printer only reason i ask

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว

      there are some traxxas convention kits

  • @svtmotorman
    @svtmotorman ปีที่แล้ว +1

    Link for the print file ?

    • @RcCrawler82
      @RcCrawler82 ปีที่แล้ว

      I also would like to know where to get these awesome upgrades!

  • @brianbutton1591
    @brianbutton1591 2 ปีที่แล้ว

    Them tires will work well on my TRX4 K5 lol.

    • @borisworx9199
      @borisworx9199  2 ปีที่แล้ว

      you are in the final draw

    • @brianbutton1591
      @brianbutton1591 2 ปีที่แล้ว

      @@borisworx9199 awesome. Thank you.

  • @Prostyrolnik
    @Prostyrolnik 9 หลายเดือนก่อน

    I guess I'm stupid. What does this have to do with flex? U just lowered the shock absorbers. Ride sits higher. It's more like a lift, but a fake one because the shock absorbers are the stock length. The Panhard mount is also lower so the axle hits it as in the stock one setup. So you have more flex only from the front right wheel. The rear flex is also like the stock one because the upper and lower shock schocks mounts have the same spacing(stock schocks), so schock travel dosend change,height only. So the flex has not changed neighter. Only the height of the ride. Or im miss some thing ?

    • @borisworx9199
      @borisworx9199  8 หลายเดือนก่อน

      maybe i should have called it droop kit

  • @reddeerrebelrc6674
    @reddeerrebelrc6674 ปีที่แล้ว

    Irs a trail truck.. doesn't need more

  • @joseywilds3133
    @joseywilds3133 2 ปีที่แล้ว

    I don’t need em half battery thru my trx-4 and the gears stripped along with a rear bent differential, along with a melted motor housing, along with dry rot tires, ect I will never buy traxxas again!

    • @paulschryer9571
      @paulschryer9571 2 ปีที่แล้ว

      - WHAT THE HECK DID YOU DO TO THAT POOR TRX4 !!!??? .....😱 - MAN...

  • @paulschryer9571
    @paulschryer9571 2 ปีที่แล้ว

    - There is nothing in your "community" section of your channel, so "how" did anyone "know" (IF) THEY WON...!!!!???
    - REALLY !!! ... 😒