Make a foldable painting booth!
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- I made a painting booth that can be folded compactly.
It can easily be halved in size, and fans and ducts can also be stored inside.
It has high suction power and does not scatter thinner in the room.
In addition to the painting booth, it can also be used as an air cleaner that discharges dust.
Click here for the plan !
jisaku-koubou....
【Plan List】
jsk-koubou.sto...
[JIG]
・Extendable Circle Cutting Router Jig
• 【DIY】 Extendable Circ...
・Drill stand
• Making a 6 in 1 Drill ...
・Magnet drill stand
• DIY Making A Magnetic ...
・Belt sander
• Make a Belt sander @Wa...
・Making a 2-in-1 Circular Saw Slide Guide (Easy Panel Saw)
• Making a 2-in-1 Circul...
・How to make Line laser module
• 【DIY】格安レーザーを改造。ラインレーザー...
・Workbench
• Creating a High-Rigidi...
・Homemade height gauge
• Homemade height gauge ...
・right angle corner clamp
• How to make a right an...
Awesome video, as usual! Why is it that TH-camrs that don't talk use excellent microphones, and TH-camrs that talk use poor microphones?
I would be happy if you could share my video on your SNS.
Be careful spraying solvent based paints. If that is not an explosion proof fan it would only take one spark to ignite a flame.
It can be a big big fire.
Very impressive ... I will make one of these & vent exhaust into mother in law's bedroom as shown @ 17:54 ... 😈
Blowing that paint air straight into all the other rooms connected to that vent ;)
Wouldn't some sort of filter fabric be better if you're using it for paint? Those particles will stick to your fan blades pretty fast and build up, resulting in vibration issues over time.
And if u want to build something like this, try to find extractor with engine outside of the tube, paint fumes ale flamable and can ignite from engine ;/
Yes, it's the way to the fan's quick death. It must have filter in coming stream or situated outside it. But in general, idea is interesting.
And weirdly - there is already a extractor fan in his wall, why does the extractor/spray paint booth need its own fan when he is plumbing it into an external one? Both will get damaged - it needs filtration and whatever he is extracting with it will be blown outside
@@szaibot Dayton fans and ventilation builds several. Check them out. There’s also a few others. Be safe!
Yes. I painted a full size car and built a temporary paint booth. The fan lasted long enough to complete the job. Three stage paint and nasty VOC fumes. I used a HEPA filter to reduce particulates. If I do it again I will run the exhaust fan via belt drive.
That way I can use a solvent to remove paint from the fan blades. Using an AC motor to prevent arcing(explosion)from DC motor brushes. This foldable paint booth has a well designed plenum. 🧠
just imagine what he could do with a full-sized screwdriver.
also suitable for soldering booth.. very nice..
What is your source for the non-wood components you use in your projects? ie, bearings, fans, metals etc. I have noticed that they are ommitted from your plans as well.
Nice build, some quick release mechanism on the fan would be a nice addition to it. :)
He's probably on it already
Cool. Put led strip inside that to make it easer to see while painting.
I just use a cardboard box, a 4" 200cfm fan, some ducting and a lot of duct tape. I spray paint every day and I never have to deal with paint fumes or dust from hand sanding small parts. This is way nicer though especially if you don't have a need for a paint booth daily and don't want something that big taking up so much room.
🤨 - he already has a extractor fan in his wall and he fitted a second fan on the extraction booth and plumbed it into the wall fans vent, why? Only need 1 fan, and no filtration - both fans will get damaged and whatever he is extracting will be blown outside ⚠️
Hello dear friend! I really like your videos!!! Please tell me which camera (model)do you shoot your videos?
Without a filter before the fan motor problems will develop quickly
Thank you so much. You have been a huge inspiration as well as a wealth of knowledge. I have learned so much from you in the short time I have been woodworking!
ダクトファンの固定はネジじゃなくて、パッチンフックだったら完璧だと思います。とても素晴らしい考えてと作りでした
フィルターはつけなくてもいいですか？
Do you have a link to the blower you used?
Здорово, только сам вентилятор надо монтировать подальше от рабочего стола и через систему циклона. Так будет меньше шума в рабочей зоне, вентилятор меньше будет забиваться мусором, ну и сам мусор будет оседать в системе с циклоном. Вообще в мастерской должна быть единая система вентиляции с циклоном. А данная вытяжка на рабочий стол к ней просто подключаться.
Hello
I couldn't think of a cyclone system.
Thank you for the great idea！
こういうの欲しかったです！
焼肉用のダクトも作ってみてほしいです！！
Very nice!!!!!!! What CFM of this fan?
Nice concept, problem is you filter first to keep the environment clean, second to protect your fan from the over-spray buildup.
Thank you, JSK-koubou, for the great video!
th-cam.com/video/3J6s1o6RNNk/w-d-xo.html
Were these metal clamps made by You? Or did you buy them?
Beautiful work as always. We featured this video on our homemade tools forum this week :)
Bel lavoro!👍👏👏
Un po' di materiale fonoassorbente ed un filtro aria Carboni attivi ed è perfetto!!..Ing..👍🙋🏻♂️
Нужно ставить фильтр перед вентилятором, что снизит его эффективность или найти вентилятор с вынесенным из потока двигателем. Хотя я таких маленьких не встречал никогда. В противном случае вентилятор, через который будет идти запыленный или с аэрозолью поток воздуха, долго не проживет.
Sehr schön gemacht... aber ohne Filter? Bitte richtig durchdacht bauen
0:45 Those screws seem really annoying. Seems like it would be easier to have half of the ring fixed, and the other half on a hinge and latch which you can just open and swing out of the way when installing the fan. You'd probably have to make it thicker and more heavy duty.
If you are worried about that half of the ring not being screwed down you could make some sort of keyhole slot things which could grab some low profile bolt heads so that way that half of the ring would still have solid support.
Really nice work! Thank you for your very detailed videos.
I love your videos, they are pretty instructive and relaxing.
Parts list?
Аплодисменты стоя! Браво!
good job, but add a paint filter...
that circle-cutting router jig is amazing
Хороша витяжка! Здоров'я понад усе. 👍👍👍
Отлично, для не больших робот. Спасибо.
素晴らしい完成度。メーカーもこれを見習って欲しいもんです。
Cabine de pintura do Gepeto
ぷ
It occurred to me to repaint my old range hood, redo it a little, install a stand, and just do it
Hubiese estado genial si hubiese facilitado un despiece detallando las medidas.
De esa forma no habría posibilidad de fallos.
Gracias y un saludo.
Как всегда, на высоте!
great job,just add a panel filter on the top inside of this box, a filter between two grids for example , close to the motor intake. and it will be perfect.and your motor will last longer.and paint or other particules wont go anyway.
Sorry to be off topic but does any of you know of a tool to get back into an Instagram account..?
I stupidly forgot my account password. I love any tips you can give me!
@Juan Watson Instablaster :)
@Richard Mathew Thanks for your reply. I got to the site through google and Im trying it out now.
I see it takes a while so I will reply here later with my results.
@Richard Mathew it did the trick and I now got access to my account again. I am so happy:D
Thank you so much you saved my ass !
@Juan Watson glad I could help :)
Paint can stays in your other rooms if your main ventilation fan is less powerful. And your fan bearing will collect all paint and will rotate slower and louder. You uploaded the video 2 years ago. How does it work know?
на высоте!
Good job, but not useful for me, most of his projects for advanced and the most annoying thing is there is no any links for the materials in his projects, unsubscribed 💔
COOL !!!
👏👏👏
As a maker and admirer of perfection your videos come over as soothing and asmr
bonjour génial ta cabine de peinture est qui est possible de me dire de quel modele de ventilateur que tu a mis en te remerciant bien d'avance
to loud but well done.
저렇게 설계하면 와류가 생기지 않습니다. Good
👍👍👍👍👍
What are the Measurements I paid the 800 JYP
Какой диаметр вентилятора, и характеристики, обороты и сколько кубов воздуха в минуту производит!?
Did you vent this into where (outside), I hope, or into a dead area/ zone.
How a very nice and very practical. One little suggestion, maybe stick some aluminium foil paper to the inside of the chamber for easy cleaning when color spary. thanks
完成品は買えますか？完成品の重さは？
What’s the name of the fan you use for the booth
Komplizierter Aufbau, und der Motor wird wohl nicht viele Spritzgänge unbeschadet mit machen. 🥴
What is plan coast in U.S ?
At 2:45 I thought you were going to light a cigarette. I have something similar made with cardboard, but without the fan, so, thanks for the idea. Cheers.
Класс...!!! 😊 😊 😊
neighbor thinks they're getting a new HVAC system....
Excelente!!!!!!
Very nice..thank for sharing
how much max CFM of this fan?
nice work homie ☺️
Super !!!
Me gusta el ritmo tranquilo del trabajo, la precisión, y sobre todo, el silencio, sin comentarios. Me suscribo al canal !
What Fan do you use?
Félicitations ! Ils sont des personnes qui sont des génies, et vous en êtes ! Magique la cabine à peintures de sa conception et de la méthodologie apportée, ainsi de son environnement des autres outils dont vous êtes le concepteur ! De cordiales civilités Patrick
相変わらず丁寧な工作ですね。作っている途中で壁側に換気扇付けた方が良くね？と思いませんでした?（笑
とうか、付いてますよ・・・壁側にも。
awesome bro
Very Nice
great, i'll follow one like that, very handy and helpful..thanks 👍
Another excellent, no need for words your videos explain everything.
Doubling as a dust collector with enough airflow is a big benefit I did not realize, thanks for the video.
10:50👍👍👍👏👏
HI, love you channel and the job you do, congrats and thanks, i want to ask if you have the video of the vertical saw that you show in this video, thank you !!
Great video and idea in general 👍🏻
What a creative and skilled guy! Such an inspiration and great videos!
Just have one question for you DUI people:
What kind/kinds of "double-sided (easy) removable tape" have your tried and would you recommend?
The ones I've tried have been very expensive AND horrible to remove!!
Now I'm using normal "masking tapes" (used for painting, etc) and folds them so they work as double-sided tape, as it's cheap, very easy to use and to remove without any trace of the used glue/adhesive on wood, tools, etc.
But I still would like a good double-sided tape :)
Be creative and careful out there (y)
JSK has replied to this question - "I use this double-sided tape. amzn.to/2rnNSkl
However, I use four different types of double-sided tape depending on the application."
天才ですね！
Sangat inspiratif....
What is the diagonal piece for?
整流板です。
効率的にミストを吸い込めるようになります。
Very good idea.
gracias por compartir tu magnífico trabajo Maestro
hola me encanta tusvideos
Amazing
Nice build! Are you planning to add a filter?
👍👍👍👍
Very cool
図面購入させていただきました！
And the filter?
Great booth for smokers
🥰👍👏👏👏👏👏👏👏💯💯
Perfeito, muito bom mesmo.
nice
Id need to make it twice the size for my type of work.