Just binging your content! on a side note, I wonder if a magnet with propeller type geometry could help stir up the ether more effectively than just a magnet?!
I printed a bowl with 10mm classic magnets on a 3d printer. I have a problem with vibrations and especially with centering the bowl. I need the bowl not to vibrate when rotating. I put layers of paper between the motor shaft and the bowl, tried rubber, but it still throws and vibrates. Any tip? I think that if it does not run completely smoothly, the machine is not effective. Because I don't feel anything on my body when turning 3350 rpm, even after 20min. Not even any pain relief. Thank you for your response and I wish you the best of luck building more machines. Great job!
From my experience I can tell you that slight vibrations always will occur, that’s why I use vibrations dampeners on my motor holder. My first build also had too much vibrations so I had to reprint and rebuild the magnet bowl. Make sure you print the bowl massive (100% infill) then the bowl should have a tight fit on the motor shaft. In terms of pain relief, try different rotation speeds, also the effects might not occur immediately, depending on your issues it is more of an accumulative effect and it will help if you use it over multiple days or weeks. If you have slight vibrations in the system it won’t diminish the effects, just make sure they aren’t so strong that the device self destructs.
Great work thanks for sharing , Did you say 15x15x15 magnets I can’t find anywhere that sells the magnets it would be great if you posted a link to the sources you use , Trying to build one as a small community project hopefully to help others on the health journey , Again many thanks for sharing ❣️
I can find at least 10 sellers if I search for cube magnet 15mm on google, please don’t tell me you can’t find them, there are more than enough offers out there.
Another question is have you tried spinning it on the motor to see how it works and if the motor is capable of spinning it at 3350rpm? BTW is think you got the colours wrong because North Pole is always coloured in Red as far as I can remember since I was a kid and according to google search as well.
I would really like to work with you on a project. This is a serious proposal. I have a few investors that we can both take our projects to the next level.
I love your videos n work trully ⚜️🔺♻️💢♦️💢♻️🔻⚜️ I wanted to ask you Can you send me one premier or hallback array? It would mean allot And its very diffocult To get here all the necessary components. I will return tge favour By sending u mine Super simetric Drone and flyin orb 🔻♻️🔺 I never ever asked 4 anything. I can pay u directly. In anyway all best ,bravo 4 your work
Thank you so much for the files btw!!!
You are welcome!
Ok. It's cool. Why? What do you do with it?
It is used for a Primercube build.
@@OmegaZZ111 And what, pray tell, does one do with a "primercube"?
Nothing short of amazing. Check your messages. Trying to buy this. Very very cool.
where do you get the magnets from for a decent price?
I just printed out the last large bowl you put out! Took me 9 trys to get my stupid Ender 5 plus to print right hahaha!
If you thought printing it was the hard part, wait until you have to insert the magnets 😄
Does it make cells structured and coherent?
great work as always
why is the southpole field more pleasant than the northpole field? Can one feel it?
Not everyone can feel it, but with such big and strong fields many people can.
Can I ask which printing filler you use for these?
I mean material, sorry for any confusion.
I use PLA for printing.
@@OmegaZZ111 Thanks a lot for the update, much appreciated.
Can these be made using a Halbach array?
Just binging your content! on a side note, I wonder if a magnet with propeller type geometry could help stir up the ether more effectively than just a magnet?!
I printed a bowl with 10mm classic magnets on a 3d printer. I have a problem with vibrations and especially with centering the bowl. I need the bowl not to vibrate when rotating. I put layers of paper between the motor shaft and the bowl, tried rubber, but it still throws and vibrates. Any tip? I think that if it does not run completely smoothly, the machine is not effective. Because I don't feel anything on my body when turning 3350 rpm, even after 20min. Not even any pain relief. Thank you for your response and I wish you the best of luck building more machines. Great job!
From my experience I can tell you that slight vibrations always will occur, that’s why I use vibrations dampeners on my motor holder.
My first build also had too much vibrations so I had to reprint and rebuild the magnet bowl.
Make sure you print the bowl massive (100% infill) then the bowl should have a tight fit on the motor shaft.
In terms of pain relief, try different rotation speeds, also the effects might not occur immediately, depending on your issues it is more of an accumulative effect and it will help if you use it over multiple days or weeks.
If you have slight vibrations in the system it won’t diminish the effects, just make sure they aren’t so strong that the device self destructs.
I would be very interested in purchasing a primer cube made by you
Send me an email for that.
For what purpose did you build them despite being cool?
For a Primercube build.
Great work thanks for sharing ,
Did you say 15x15x15 magnets I can’t find anywhere that sells the magnets it would be great if you posted a link to the sources you use ,
Trying to build one as a small community project hopefully to help others on the health journey ,
Again many thanks for sharing ❣️
I can find at least 10 sellers if I search for cube magnet 15mm on google, please don’t tell me you can’t find them, there are more than enough offers out there.
Another question is have you tried spinning it on the motor to see how it works and if the motor is capable of spinning it at 3350rpm? BTW is think you got the colours wrong because North Pole is always coloured in Red as far as I can remember since I was a kid and according to google search as well.
Finally gonna buy a 3D printer in the next month or 2 so I can build some of these things!
I would really like to work with you on a project. This is a serious proposal. I have a few investors that we can both take our projects to the next level.
If you want to do that just send me an email.
The only problem with this is 15mm cube magnets are impossible to find.
I don’t know where you live but when I search for cube magnets 15mm I can find at least 10 offers to buy them.
Welp... at least i dont have to design this muself but ima need these files asap 😂
You just simulated an Eclipse with your magnetic film.
Magnetic viewing film is kind of useless. Would love to see this thing through a ferrocell at different distances and while in motion.
I love your videos n work trully ⚜️🔺♻️💢♦️💢♻️🔻⚜️
I wanted to ask you
Can you send me one premier or hallback array?
It would mean allot
And its very diffocult
To get here all the necessary components.
I will return tge favour
By sending u mine Super simetric Drone and flyin orb 🔻♻️🔺
I never ever asked 4 anything. I can pay u directly.
In anyway all best ,bravo 4 your work
You can find my shop or email in the video description.