@@UHFStation1 in the configuration tool, you can search by input - so select the controller on the left side, then search by input, and press a button or move a lever, and it will tell you what is currently mapped to it, and in which profile.
Jonathan. Thank you. Explained in logical progression. Slow enough speech to be able to understand. Placed this video into my Sim favourites so I can watch again. As you said 'Good innit'. This is why I have you subscribed.
Thanks Jonathan. Nice, clear and concise. Confirms what I understood which is a relief. I didn’t know about the profile curves vs device curve though. So must remember that point
Hi Jonathan, this is by far the best description and tutorial about the managing of controls, and profiles I have come across. So far the frustration of not being able to get trimming sorted for pitch is driving me mad. I am a retired glider pilot with over 500 solo hours and not being able to trim to speed, takeoff, landing and continuous turns goes so far against my airmanship. All I want is to add nose up, nose down to the hat switch on my TCA side stick for GA and Gliders.
Yep can't move mouse in plane it just skits out also can't map some buttons on Hotas and Bristol n Coningsby are my go to airports but the add ons ain't there. 2020 tho has never looked better now alot of PCs are off server especially with third party trees , runways etc so I'll have another look at 24 next year sometime.
Are you using Xbox controller mouse function? Because if so, you need to plug in a real mouse into your Xbox. On Series X there are two extra USB sockets in the back of the console. Xbox controller mouse function sucks. I figured that out 5 minutes after I installed 2020 upon release.
@ no. I’m using mouse and keyboard both of which had no problems in 2020. the keyboard works, the mouse just goes crazy whether outside or in cockpit. I tried changing some settings for the mouse but none of them had any effect.
@stefanblackadder5236 well that sucks to know. I havent been home since 24 release. But from what I've seen. I think I'm just gonna hold short on 24 untill they get some bugs worked out. 2020 was a mess at release too. But then again what game or sim isn't upon release. The UI needs some work for sure.
Thank you SO very much for this! Concise and well explained! I've been going completely mad trying to gain a grasp of the deep changes in seemingly ALL of the bindings, and MS/ASOBO's complete lack of guidance -- and what seems to me to be utterly unintuitive structure/labels. You have brought some LOGIC to the discussion, and I am grateful! :)
I really tried to click with this game but as a beginner and a casual, I was hoping for an easier control that I can just flip on and it would be a standard airplane controls that you may be learned in a game like grand theft, auto five or any other game that you had control of a plane, but it was simplified. Instead, it’s a little bit too overwhelming for me and at the end that award is not really worth it like I said I’m a casual player so I’m going to move on or you’re only gonna keep me engaged by giving me interesting missions and good rewards. I’m not saying the game is bad but it’s made for people that like flying in real life.
When clicking the cog. In the left column, you get all the chosen thingy's buttons. So if the thingy you have don't want to map the right button. You can go there and assign a button manually.
Setting up th controls isnt that hard imo. But holy cow, finding some of the binding names is insane. They didnt use logical names all of the time. Especially for the camera controls. There are so so many and some of them have almost the same name, but do very different things. Took me 20 minutes to find the binding for how to use the avatar as well.
Thank you Jonathan, great insights into this system. I am having an impossible time mapping reverse thrust with the thrustmaster quadrant on the cessna grand caravan.
Although it seems like a mess it is actually a better way of doing it in my opinion yes it is different to 2020 but once you get your head around it it is fairly simple to set up.
Yes, it is actually a vast improvement on how the profiles were handled in MSFS2020, which very few of the reviewers (Jonathan being one of the exceptions) have appreciated. Once we have the profiles set up correctly as we want them, we won’t have to think - is this the right profile for this aircraft? and often have to change profile before flying a different plane. Asobo have taken onboard the criticism of 2020 (in this respect) and given us a logical and valuable alternative. Thanks for pointing this out Jonathan.
OML I wish I'd had this video a week ago, it would have spared me so much hair tearing, and stopped me having nearly as many profiles with 4 letter names 🤣
Thank you so much for the video. I found that you are extremely articulate and have a knack for explaining things clearly. What I’m not clear on is the difference between ‘Apply to all aircraft’ versus ‘set as default’. I’m not sure if they’re intended to be used for all airplanes in that class or all aircraft across the sim. 😊
Remember that msfs2024 will remember which profile you have used while using a given aircraft? If you choose "apply to all aircraft" on a profile, it will make that profile the default when you step into other aircraft too. I can't imagine why you would do that, but that's what it's there for.
@Thank you. I understood that also. I’m just confused as to why Asobo had to implicitly include those 2 settings within the profile? I believe it’s not as as intuitive to the end user. Maybe it’s just me. 😀
Hi Jonathan. Thanks for another great video. I have the same throttle quadrant as you but on msfs2020 I used it briefly with the Cessna but didn’t like it when the throttle went into the notch when I wanted it to stay a bit more or a bit less than in the notch. (Hope you understand what I mean) I ended up reverting back to my Logitech quadrant when flying prop planes and just used the airbus quadrant for well…the airbus. How do you cope with it on the Cessna?
Love your programs Jonathon. The opening shot of this video started with a shot of the door on the 172 I hoped you were going get in because I can’t now. Using shift-c to get close to the door and open it the program then zooms back out. This never happened the first time I ran it the day after launch the cam went straight into cockpit as 2020 did.
You're in the external view :) CTRL+C switches between walk-around and normal mode. Normal mode can be internal or external - press BACKSPACE to toggle. The sim remembers where you last were :)
Transversal is one of the default keyboard profiles. There is a set of 2024 key mappings, and a set of 2020 key mappings. You quickly find out that if you revert to the 2020 keyboard mappings, you're missing lots of keys for 2024 specific functions - which was my trigger to forget everything about 2020 and just go with the "new world".
So happy to find your video! I just start up but finding my TCA sidestick if left hands-off it puts Cessna 172 nose down constantly, perhaps i need to calibrate the elevation? Cheers!
Jon sorry another Q, cameras: custom set ups when you set up a custom view 01 say for the EFB in the C172. When you then load in the SR22 does the custom view 01 still apply to the SR22 or can I use custom 01 again without it affecting the C172. Phew hope that’s an understandable Q.
The profile (the mapping of the keys) controls what the keyboard does in terms of saving and loading into the 10 "custom views" - I didn't explain it well in the other video about views. The simulator will save your configured views for the aeroplane - you don't need different keyboard profiles for each plane.
Jonathan...thanks for another outstanding video and for all you do in helping people learn this incredible simulator. Question...when assigning a button to a desired outcome, everyone ALWAYS uses the LEFT vertical column to do the mapping. What is the RIGHT vertical columns used for? Thanks in advance. John
Very nice. Your video will be used a lot more than you probably will ever know. I for one will certainly be using it. At age 83 I need all the help I can get. I made it through 2020 and VR so I am sure I'll get past this too. I am the "Digital Traveler" MS is now talking about. I love to use my Pimax Crystal to explore the POI's of World Updates, and custom airports. And I have been "walking around" in GEVR for 8 years now. I hope they add gondola cars and ski lifts. They should also try to buy into Google's 360 degree photo library. That would be huge.
Have you had any luck configuring reverse thrust on the generic A321 (inisbuilds) that comes with MSFS2024? I've tried calibrating it with the tablet in the cockpit and all the detents line up for the Airbus throttles (thrustmaster), but I will not recognize reverse thrust... Guessing I need to change something in the settings you outlined above???
You don't make airplane controls. Each function that can be mapped is classified as a general, airplane, or specific function. Therefore you know which profile it is going into.
Just followed your excellent video on the control settings, I have finally just reconfigured my airbus stick to work it was an uphill battle with actual conflicts when I set the flaps down the camera shot to exterior view, one other item why does the aircraft in this case Cessna 172 drop a wing and start spiralling down when hands off for a few seconds, needs constant correction to keep wings level which is hard work without auto pilot happens all the time have tried different controllers and setting, any ideas would be helpful, have flown irl so I know what is normal.
Yep - you may well end up removing other mappings - thankfully you can search by input, which tells you what is already configured on a given button, letting you delete it :)
I'm having issues as I don't think the bindings are always saving. Is this a known issue? Maybe you have to escape out of the game and change the controls rather then using basic controls from ingame menu?
Make sure you have chosen the right profile before mapping things - otherwise (if you're on the default profile), it will make another profile, and another, and another - e.g. each time you get in a different plane, you'll find it's using the default profile "by default" which doesn't have what you mapped previously.
@jonbeckett yes I'm pretty sure I am. Might be a bug that not all is saving. I also my avionics 1 and 2 switches done seem to work. I have mapped them on the alpha for the 172 but they don't so anything ingame. So frustrating.
On the tca side stick the (red button) auto pilot disconnect setting doesn’t disconnect. I’ve had to set it to autopilot master but this is incorrect in real life. Wonder if this is a bug
It does work, because I've been using it. I'll do another video on that specific subject. They let you set the any button combination to save a camera setting (10 save mappings), and any button to load a camera setting (10 save mappings). Search for "save custom camera", and "load custom camera" to find them.
Hi Jonathan i have the same hardware as you i am really having trouble with the two engines profile i was wondering if you could share your bindings for GA and Airliners i would be very grateful if you could ?
Another excellent video thank you Jon. The thing I really want to do is, I fly a Cessna 172 with G1000 with the 01 Livery. Can I possibly have a default for the above configuration without having to create it every bloody time. So frustrating to see such bad Ui programming all over. I am hoping you know how to do it. Regards from NZ.
Thanks as always. So, for the camera (general) I set up different cockpit views for the different aircraft and save that as that AC name “172 cockpit camera”. When I do the same for the vision Jet. The 172 cockpit views kick in. Any ideas? Have I missed something? Thanks
how do I make my Saitek yoke less sensetive so it needs more input for pitch and roll. It is a bit twitchy just now. Same goes for Saitek rudder pedals.
I currently have no throttle control in the IFR training and can not climb. No issues in missions at all just not going above 800rpm in the training. Any ideas of what’s going on with my controls? I’m using TM throttle and HC Alpha yoke. I’m lost and can’t do the IFR cert. just won’t work.
I have a question In some video they create profile and then save it to All Aircraft and Default. What the difference?? I can not figuer out. I try to create a profile for Boeing 737 8 max. I have the same equatment like yours. I want that my speciel camera views for this boeing turn up for my keyboard auto when I choose this boeing. I want that my settings on my sidestick is the same for all aircraft whatever I choose. I the also want my specifications on my throttle for this Boeing 737 max turn up when I choose this. But not when I choose the Fenix Airbus. How do I handle this options " All Aircraft" and " Default" for different profiles Best Regards Bjorn
I literally explain in the video. General = simulator functions (such as camera views). Airplane = general aircraft functions (such as flaps, gear, etc). Specific = unique things to the aircraft you are using (such as water release, winches, etc)
Hi there. Can you let me know about PMDG 737’s and msfs 2024? I’m on Xbox and they don’t seem to work on 2024?? One of my 737’s is also missing on 2024! Also is simbrief not linked to new system??
Mate... I mainly fly helicopters on mfs20... no matter what i try on mfs24 each pedal becomes the entire left to right axis.. so at a touch of the left rudder it goes full right ... push deeper it straightens up ... full press... it starts going left... I can't get passed it 😢.... the planes are working 😫... ut I dont wanna fly a plane lol... I wanna do flippy/spinny tricks and show off infront of people in my UH1-HUEY 😢
perhaps you are able to find the reason behind the ability to open the ATC window using the keyboard but no way of closing it except with the mouse.That is a no no for me as I suffer from essential tremor which renders the mouse useless for one handed use.I've looked for a toggle,no toggle,I've looked for a close,no close.This may turn out to be an omission also known as a very rude expletive or bug..................................................
All I want to do is erase everything and map everything one by one myself. I spent 10 minutes trying to find out how to make the character walk right. There are settings to walk forward, backward, left but no setting for them to walk right. I thought I was going crazy. Apparently "strafe right" is supposed to be the right setting. So why is there a setting to walk left but none to walk right then. I swear Ai designed parts of this game.
It's really too bad that the control settings seem to be impossible to use without a mouse, at least on Xbox. I can really do *nothing* with it, as the Search box and Search by input button seem difficult to get to and then impossible to get out of to actually do something with the bindings. Nobody at Asobo really tried to even do this on an Xbox, I guess. 😢 Will need to attach a USB hub with a full keyboard and an mouse to even try if I can even do anything with all this crap. Not your fault of course - this video seems very useful to explain something Asobo seems to explain little to nothing about anywhere - but still...
reimagined? I just want to be able to assign TAB to bring up the toolbar and save that in the new 2024 keyboard. Think that is possible? Nope. It makes you name it as a new profile. So you lose all the movement keys. I hate it so much. edit: hmmm, i need to duplicate it and then make the change. Still seems unnecessarily complicated and annoying.
I think the duplication thing is in case you make a total mess of reassigning stuff? .If you do completely mess it up you can just delete that duplication and start again, whereas if you could change the default and mess it up, there's no going back.
@@Fella-1000 you cannot change the default profiles - so it will always ask for a new profile name if you're not already using a new profile. That way, you ALWAYS have the default profiles to fall back on.
Beginners? This is extreme advance.... Is there a real beginners video out there that show: 1 the button to change view from cockpit to outside plane? 2 The button to exit aircraft? 3 The button that change view when walking from first person to behind the person? 4 Maybe a few more real beginners button to. Such an awesome game (it look on youtube and on my computer), unfortunately unplayable due to extreme complexity...
MSFS 2024 sucks. Even when you finally figure out a setting many don't work. And who decided to put that big tablet right in the front window? And once you find out how to get rid of it, you still have a big mount that looks like a big penis sticling through your glass. And of course the Honeycomb throttle unit LED lights don't work again like every upgrade knocks them out. You lpst a lot of customers by releasing this before it was ready.
This control setup and saving profiles vs is so damn complicated and annoying that i am seconds away from uninstalling this game and request for a refund..
They just need to fix this the way it was on 2020. I should not have to do this much work to play a freaking game. Nothing works on Xbox, this game is trash right now.
If you would like to buy me a cup of coffee for this, head to Ko-Fi :) ko-fi.com/jonbeckett
Is there a way to know what every control does? There are like over ten items for physical control.
@@UHFStation1 in the configuration tool, you can search by input - so select the controller on the left side, then search by input, and press a button or move a lever, and it will tell you what is currently mapped to it, and in which profile.
But there are like 10 items called throttle and I suspect they aren't all exactly that. I want to know the subtle differences between all items.
Jonathan. Thank you. Explained in logical progression. Slow enough speech to be able to understand. Placed this video into my Sim favourites so I can watch again. As you said 'Good innit'. This is why I have you subscribed.
Thanks Jonathan. Nice, clear and concise. Confirms what I understood which is a relief. I didn’t know about the profile curves vs device curve though. So must remember that point
This is the best guide to FS controls that I have found.
To delete an assignment, it works to mouse over the assignment and hit backspace. No need to go into the cog menu.
I think that if you are on 2024 Transversal that doesn't work
Legend thanks!!
@@Topofdescent55 Correct, since that is the default keyboard profile and can not be modified.
Hi Jonathan, this is by far the best description and tutorial about the managing of controls, and profiles I have come across. So far the frustration of not being able to get trimming sorted for pitch is driving me mad. I am a retired glider pilot with over 500 solo hours and not being able to trim to speed, takeoff, landing and continuous turns goes so far against my airmanship. All I want is to add nose up, nose down to the hat switch on my TCA side stick for GA and Gliders.
This is the best explanation of the controls mapping. Xbox SX flyers have a mouse problem that I wish they would fix.
Yep can't move mouse in plane it just skits out also can't map some buttons on Hotas and Bristol n Coningsby are my go to airports but the add ons ain't there.
2020 tho has never looked better now alot of PCs are off server especially with third party trees , runways etc so I'll have another look at 24 next year sometime.
Are you using Xbox controller mouse function? Because if so, you need to plug in a real mouse into your Xbox. On Series X there are two extra USB sockets in the back of the console. Xbox controller mouse function sucks. I figured that out 5 minutes after I installed 2020 upon release.
@ no. I’m using mouse and keyboard both of which had no problems in 2020. the keyboard works, the mouse just goes crazy whether outside or in cockpit. I tried changing some settings for the mouse but none of them had any effect.
@stefanblackadder5236 well that sucks to know. I havent been home since 24 release. But from what I've seen. I think I'm just gonna hold short on 24 untill they get some bugs worked out. 2020 was a mess at release too. But then again what game or sim isn't upon release.
The UI needs some work for sure.
I can second the mouse problem. I've tried for hours to fix it. The pilot just keeps having seizures and looking in all directions extremely fast.
Thank god someone makes sense in how to bind. thank you so much
Finally someone makes sense of this. Thanks Jonathan
Thank you SO very much for this! Concise and well explained!
I've been going completely mad trying to gain a grasp of the deep changes in seemingly ALL of the bindings, and MS/ASOBO's complete lack of guidance -- and what seems to me to be utterly unintuitive structure/labels. You have brought some LOGIC to the discussion, and I am grateful! :)
Excellent tutorial and actually feel like I have an understanding of it all now, thanks
I really tried to click with this game but as a beginner and a casual, I was hoping for an easier control that I can just flip on and it would be a standard airplane controls that you may be learned in a game like grand theft, auto five or any other game that you had control of a plane, but it was simplified. Instead, it’s a little bit too overwhelming for me and at the end that award is not really worth it like I said I’m a casual player so I’m going to move on or you’re only gonna keep me engaged by giving me interesting missions and good rewards. I’m not saying the game is bad but it’s made for people that like flying in real life.
Thank you. Finally I can stat to set up.
Thanks much!! Appreciated!!
When clicking the cog. In the left column, you get all the chosen thingy's buttons. So if the thingy you have don't want to map the right button. You can go there and assign a button manually.
It makes sense Jon, always easy to grab in, the way you explain :) Thx ! Haven't swapped over yet, though
Setting up th controls isnt that hard imo. But holy cow, finding some of the binding names is insane.
They didnt use logical names all of the time. Especially for the camera controls. There are so so many and some of them have almost the same name, but do very different things.
Took me 20 minutes to find the binding for how to use the avatar as well.
U sir, u are my hero I have the same setup and I'm going mad trying to set it up and just. Giving up completely I shall try this tonight
Thank you Jonathan, great insights into this system. I am having an impossible time mapping reverse thrust with the thrustmaster quadrant on the cessna grand caravan.
Same I gave up and put it as toggle reverse thrust on what would be auto thrust disengage button
Although it seems like a mess it is actually a better way of doing it in my opinion yes it is different to 2020 but once you get your head around it it is fairly simple to set up.
It's fantastic. Much better. That it remembers is the key thing.
Yes, it is actually a vast improvement on how the profiles were handled in MSFS2020, which very few of the reviewers (Jonathan being one of the exceptions) have appreciated. Once we have the profiles set up correctly as we want them, we won’t have to think - is this the right profile for this aircraft? and often have to change profile before flying a different plane. Asobo have taken onboard the criticism of 2020 (in this respect) and given us a logical and valuable alternative. Thanks for pointing this out Jonathan.
Very helpful, thank you Jonathan. I’m now left at the end of that with the idea of retro-fitting an after burner to a Cessna 172!
OML I wish I'd had this video a week ago, it would have spared me so much hair tearing, and stopped me having nearly as many profiles with 4 letter names 🤣
Well explained-thank you!
Thank you so much for the video. I found that you are extremely articulate and have a knack for explaining things clearly. What I’m not clear on is the difference between ‘Apply to all aircraft’ versus ‘set as default’. I’m not sure if they’re intended to be used for all airplanes in that class or all aircraft across the sim. 😊
Remember that msfs2024 will remember which profile you have used while using a given aircraft? If you choose "apply to all aircraft" on a profile, it will make that profile the default when you step into other aircraft too. I can't imagine why you would do that, but that's what it's there for.
@Thank you. I understood that also. I’m just confused as to why Asobo had to implicitly include those 2 settings within the profile? I believe it’s not as as intuitive to the end user. Maybe it’s just me. 😀
Nicely done!
Well that certainly explains why I was making changes to the configurations but it didn't seem to be working when I got into the aircraft. Thanks.
Hi Jonathan. Thanks for another great video. I have the same throttle quadrant as you but on msfs2020 I used it briefly with the Cessna but didn’t like it when the throttle went into the notch when I wanted it to stay a bit more or a bit less than in the notch. (Hope you understand what I mean) I ended up reverting back to my Logitech quadrant when flying prop planes and just used the airbus quadrant for well…the airbus. How do you cope with it on the Cessna?
I removed the curves for the throttle axis :)
Love your programs Jonathon. The opening shot of this video started with a shot of the door on the 172 I hoped you were going get in because I can’t now. Using shift-c to get close to the door and open it the program then zooms back out. This never happened the first time I ran it the day after launch the cam went straight into cockpit as 2020 did.
You're in the external view :) CTRL+C switches between walk-around and normal mode. Normal mode can be internal or external - press BACKSPACE to toggle. The sim remembers where you last were :)
I think also ‘Take Control of character’ is what you need to map. I have it set on my throttle to get in and out of my aircraft.
this is all well and good
Great Video, but a few minutes on and your top menu changes to "Transversal". What on earth does that mean?
Transversal is one of the default keyboard profiles. There is a set of 2024 key mappings, and a set of 2020 key mappings. You quickly find out that if you revert to the 2020 keyboard mappings, you're missing lots of keys for 2024 specific functions - which was my trigger to forget everything about 2020 and just go with the "new world".
So happy to find your video! I just start up but finding my TCA sidestick if left hands-off it puts Cessna 172 nose down constantly, perhaps i need to calibrate the elevation? Cheers!
Thanks Jon, which Aerodrome is that? Loving 2024 so far just missing my small VFR aerodromes. The updates will come I guess.
It's one of the Orbx airfields - Thurrock maybe?
Jon sorry another Q, cameras: custom set ups when you set up a custom view 01 say for the EFB in the C172. When you then load in the SR22 does the custom view 01 still apply to the SR22 or can I use custom 01 again without it affecting the C172. Phew hope that’s an understandable Q.
The profile (the mapping of the keys) controls what the keyboard does in terms of saving and loading into the 10 "custom views" - I didn't explain it well in the other video about views. The simulator will save your configured views for the aeroplane - you don't need different keyboard profiles for each plane.
Jonathan...thanks for another outstanding video and for all you do in helping people learn this incredible simulator. Question...when assigning a button to a desired outcome, everyone ALWAYS uses the LEFT vertical column to do the mapping. What is the RIGHT vertical columns used for? Thanks in advance. John
Very nice. Your video will be used a lot more than you probably will ever know. I for one will certainly be using it. At age 83 I need all the help I can get. I made it through 2020 and VR so I am sure I'll get past this too. I am the "Digital Traveler" MS is now talking about. I love to use my Pimax Crystal to explore the POI's of World Updates, and custom airports. And I have been "walking around" in GEVR for 8 years now. I hope they add gondola cars and ski lifts. They should also try to buy into Google's 360 degree photo library. That would be huge.
Do you have A Step By Sept Guide of to set up both Stick and Throttle??? I have had issues getting mine to work
I'll think about setting up a stick and throttle guide :)
@@jonbeckett Thank you that would help I have had Some Trouble getting things set up
Have you had any luck configuring reverse thrust on the generic A321 (inisbuilds) that comes with MSFS2024? I've tried calibrating it with the tablet in the cockpit and all the detents line up for the Airbus throttles (thrustmaster), but I will not recognize reverse thrust... Guessing I need to change something in the settings you outlined above???
clear as mud how did you make the airplane controls ????
You don't make airplane controls. Each function that can be mapped is classified as a general, airplane, or specific function. Therefore you know which profile it is going into.
Question about what we see at 11:38 : What do the two 3's mean on the assigned function?
It means the same button is mapped on several other functions.
All Joysticks should be plug and play to give you the basics on a £60 product and then sort out your assignments.
Just followed your excellent video on the control settings, I have finally just reconfigured my airbus stick to work it was an uphill battle with actual conflicts when I set the flaps down the camera shot to exterior view, one other item why does the aircraft in this case Cessna 172 drop a wing and start spiralling down when hands off for a few seconds, needs constant correction to keep wings level which is hard work without auto pilot happens all the time have tried different controllers and setting, any ideas would be helpful, have flown irl so I know what is normal.
Yep - you may well end up removing other mappings - thankfully you can search by input, which tells you what is already configured on a given button, letting you delete it :)
I'm having issues as I don't think the bindings are always saving. Is this a known issue? Maybe you have to escape out of the game and change the controls rather then using basic controls from ingame menu?
Make sure you have chosen the right profile before mapping things - otherwise (if you're on the default profile), it will make another profile, and another, and another - e.g. each time you get in a different plane, you'll find it's using the default profile "by default" which doesn't have what you mapped previously.
@jonbeckett yes I'm pretty sure I am. Might be a bug that not all is saving.
I also my avionics 1 and 2 switches done seem to work. I have mapped them on the alpha for the 172 but they don't so anything ingame. So frustrating.
On the tca side stick the (red button) auto pilot disconnect setting doesn’t disconnect. I’ve had to set it to autopilot master but this is incorrect in real life. Wonder if this is a bug
I still can't save a custom cockpiet camera views and load it on my HOTAS hat Stick. Just doesn't work. Is it me or is this an issue with MSFS ?
It does work, because I've been using it. I'll do another video on that specific subject. They let you set the any button combination to save a camera setting (10 save mappings), and any button to load a camera setting (10 save mappings). Search for "save custom camera", and "load custom camera" to find them.
How to open and close doors in medium and large aircraft? Which button???
Why are there two columns in the controls menu? What is the second column for?
Where is the help menu
Hi Jonathan i have the same hardware as you i am really having trouble with the two engines profile i was wondering if you could share your bindings for GA and Airliners i would be very grateful if you could ?
Is there a reactivity slider like in 2020?
Another excellent video thank you Jon. The thing I really want to do is, I fly a Cessna 172 with G1000 with the 01 Livery. Can I possibly have a default for the above configuration without having to create it every bloody time. So frustrating to see such bad Ui programming all over. I am hoping you know how to do it. Regards from NZ.
Thanks as always. So, for the camera (general) I set up different cockpit views for the different aircraft and save that as that AC name “172 cockpit camera”. When I do the same for the vision Jet. The 172 cockpit views kick in. Any ideas? Have I missed something? Thanks
How can you configure the sidestick's reverser button which is in the middle for the Spoilers to Up will be Armed and down will be disarmed?
how do I make my Saitek yoke less sensetive so it needs more input for pitch and roll. It is a bit twitchy just now. Same goes for Saitek rudder pedals.
Does anyone know how to set up the reversers on the turtlebeach velocity one flightstick please?
I currently have no throttle control in the IFR training and can not climb. No issues in missions at all just not going above 800rpm in the training. Any ideas of what’s going on with my controls? I’m using TM throttle and HC Alpha yoke. I’m lost and can’t do the IFR cert. just won’t work.
I have a question
In some video they create profile and then save it to All Aircraft and Default. What the difference?? I can not figuer out.
I try to create a profile for Boeing 737 8 max. I have the same equatment like yours.
I want that my speciel camera views for this boeing turn up for my keyboard auto when I choose this boeing.
I want that my settings on my sidestick is the same for all aircraft whatever I choose.
I the also want my specifications on my throttle for this Boeing 737 max turn up when I choose this. But not when I choose the Fenix Airbus. How do I handle this options " All Aircraft" and " Default" for different profiles
Best Regards
Bjorn
Hi! what’s the difference between general controls and airplane controls and the specific airplane controls? Thanks
I literally explain in the video. General = simulator functions (such as camera views). Airplane = general aircraft functions (such as flaps, gear, etc). Specific = unique things to the aircraft you are using (such as water release, winches, etc)
why is my engine 1 and 2 start at 20 % thrust i have tried every to get them to 0% is there a way to put them at 0%
Hi there. Can you let me know about PMDG 737’s and msfs 2024? I’m on Xbox and they don’t seem to work on 2024?? One of my 737’s is also missing on 2024! Also is simbrief not linked to new system??
What doesn't make sense is that the 172 has all these extra specific controls that are very useful but do not exist in any other aircraft
What do you do if your device that is connected to your computer does not show up. I own saitek radio😢, ap unit, etc that does not work
Wait for updates and/or driver updates ?
Mate... I mainly fly helicopters on mfs20... no matter what i try on mfs24 each pedal becomes the entire left to right axis.. so at a touch of the left rudder it goes full right ... push deeper it straightens up ... full press... it starts going left... I can't get passed it 😢.... the planes are working 😫... ut I dont wanna fly a plane lol... I wanna do flippy/spinny tricks and show off infront of people in my UH1-HUEY 😢
perhaps you are able to find the reason behind the ability to open the ATC window using the keyboard but no way of closing it except with the mouse.That is a no no for me as I suffer from essential tremor which renders the mouse useless for one handed use.I've looked for a toggle,no toggle,I've looked for a close,no close.This may turn out to be an omission also known as a very rude expletive or bug..................................................
All I want to do is erase everything and map everything one by one myself. I spent 10 minutes trying to find out how to make the character walk right. There are settings to walk forward, backward, left but no setting for them to walk right. I thought I was going crazy. Apparently "strafe right" is supposed to be the right setting. So why is there a setting to walk left but none to walk right then. I swear Ai designed parts of this game.
The walk keys are WASD - W = forward, A = left, S = back, D with right. Rotate with the mouse, or use J and L. In "walking mode", C crouches.
I couldn't work this out for the F18 . Gave up. Back to 2020 until I have time to look at it again! Frustrating.
It's really too bad that the control settings seem to be impossible to use without a mouse, at least on Xbox. I can really do *nothing* with it, as the Search box and Search by input button seem difficult to get to and then impossible to get out of to actually do something with the bindings. Nobody at Asobo really tried to even do this on an Xbox, I guess. 😢 Will need to attach a USB hub with a full keyboard and an mouse to even try if I can even do anything with all this crap. Not your fault of course - this video seems very useful to explain something Asobo seems to explain little to nothing about anywhere - but still...
reimagined? I just want to be able to assign TAB to bring up the toolbar and save that in the new 2024 keyboard. Think that is possible? Nope. It makes you name it as a new profile. So you lose all the movement keys. I hate it so much.
edit: hmmm, i need to duplicate it and then make the change. Still seems unnecessarily complicated and annoying.
Yoy need to duplicate from 2024 standard profile as the 2020 standard profile does contain the 2024 new commands
I think the duplication thing is in case you make a total mess of reassigning stuff? .If you do completely mess it up you can just delete that duplication and start again, whereas if you could change the default and mess it up, there's no going back.
@@Fella-1000 you cannot change the default profiles - so it will always ask for a new profile name if you're not already using a new profile. That way, you ALWAYS have the default profiles to fall back on.
I’m using only controller
What is this DCS now. They spent way too much time on this.
It's MUCH better than it was though.
Beginners? This is extreme advance.... Is there a real beginners video out there that show:
1 the button to change view from cockpit to outside plane?
2 The button to exit aircraft?
3 The button that change view when walking from first person to behind the person?
4 Maybe a few more real beginners button to.
Such an awesome game (it look on youtube and on my computer), unfortunately unplayable due to extreme complexity...
MSFS 2024 sucks. Even when you finally figure out a setting many don't work. And who decided to put that big tablet right in the front window? And once you find out how to get rid of it, you still have a big mount that looks like a big penis sticling through your glass. And of course the Honeycomb throttle unit LED lights don't work again like every upgrade knocks them out. You lpst a lot of customers by releasing this before it was ready.
WOAH WOAH CHILL
Lol, you say this as if Mr. Beckett had anything to do with the release of MSFS2024
This control setup and saving profiles vs is so damn complicated and annoying that i am seconds away from uninstalling this game and request for a refund..
I hate all the new changes, its shit. Video is good but confusing because msfs 24 didn't need to change it
They just need to fix this the way it was on 2020. I should not have to do this much work to play a freaking game. Nothing works on Xbox, this game is trash right now.
you take to long to get into the video less talkin more showing
The game is a disaster!
In the Controls if I try to do « Apply to all aircraft » or « Delete », the sim crashes. Am I the only one, is there any solutions?