This is the only video which made it clear on how to replace the badge, thanks for uploading this, I'm going to replace it soon after waiting for the new badge and the tools to arrive
Hi! We have at the moment 2 of this problems on our 2011 Yeti too. The emblem and the boot light not working. You should check if the instrument cluster shows you when your boot lid is open-this tells you that the switch is fine. I think the problem is inside the wiring loom at the boot lid hinge- on the left side should be the wires and on the right the hose for back window washer. I will have a look on ours too and come back if I will find a solution. Also, I will follow you if there are any updates
@@4WheelBuilds yes. The switch is fine with the boot lid open i ve checked if there is any voltage at the cables of the boot lamp and there isn't...my guess os that the cable is broken betwin the swtch and the lamp.
Sir reply please I have skoda Laura And the Emblem is glued but it looks like LOCKED from inside too as i saw while opening the my car's front What to do bro?😔
@@AK-qk5ci to my knowledge on the 2010 model both of these are just stuck on using double sided tape. Use dental floss or fishing line to cut through it to take the emblem off.
@@AK-qk5ci the front one you can check by lifting the hood to see if there is anything holding it from the underneath the hood. If anything there would be a clip to take off. The rear if the fishing line does not want to go through than you will need to take the rear inside trim off to check for any screws or clips.
Yeti is a 2010 1st gen model, with 1.2l petrol engine with 7 speed dsg gearbox. It's my wife's car and yes she still drives it. She loves ❤️ it 😀. It is a great car
@@4WheelBuilds I have 150k and l change chain.I change chain myself.I put the vider and stronger chain,for newer model(model after 2011), its improved chain who cant slip over the gear.But if you put new tipe of the chain you must replace lover gear(crancshaft gear). I also replace oil pump chain.Wash and clean oil sump and clean the oil pump filter.If you wont to all be perfect you must doit yourself🙂
@@4WheelBuilds У меня тоже не работала лампочка.Потом узнал,что она завязана с концевиком замка.Поменял замок и всё заработало.Эта проблема часто встречается на йети...
This is the only video which made it clear on how to replace the badge, thanks for uploading this, I'm going to replace it soon after waiting for the new badge and the tools to arrive
Really glad to hear the video helped you, this is the best feedback a creator can get in my view. Good luck with the badge replacement!
yep, mine badge is gone too! thank you for sharing the trick about preheating! :) Now I need to go and check my boot light!! :D
Glad I could help!
Hi! We have at the moment 2 of this problems on our 2011 Yeti too. The emblem and the boot light not working. You should check if the instrument cluster shows you when your boot lid is open-this tells you that the switch is fine. I think the problem is inside the wiring loom at the boot lid hinge- on the left side should be the wires and on the right the hose for back window washer. I will have a look on ours too and come back if I will find a solution. Also, I will follow you if there are any updates
Checked the instrument cluster and it shows the boot lid is open, so that would indicate the switch is fine?
@@4WheelBuilds yes. The switch is fine with the boot lid open i ve checked if there is any voltage at the cables of the boot lamp and there isn't...my guess os that the cable is broken betwin the swtch and the lamp.
Sir What size is the rear logo/emblem for this model of yeti?
the logo for the rear logo on this model Yeti is 110mm. hope that helps :) . in case you need it the original part nr is 5L0853621.
@@4WheelBuilds whats the badge size for the front aswell please?
Sir reply please
I have skoda Laura
And the Emblem is glued but it looks like LOCKED from inside too
as i saw while opening the my car's front
What to do bro?😔
Hi Amit. Are you talking about the front or rear emblem? Which year Skoda Laura are you working on?
@@4WheelBuilds Sir Its 2010 model
Front and back emblem
@@AK-qk5ci to my knowledge on the 2010 model both of these are just stuck on using double sided tape. Use dental floss or fishing line to cut through it to take the emblem off.
@@AK-qk5ci the front one you can check by lifting the hood to see if there is anything holding it from the underneath the hood. If anything there would be a clip to take off. The rear if the fishing line does not want to go through than you will need to take the rear inside trim off to check for any screws or clips.
@@4WheelBuilds Thanks Alot for helping Sir
I changed the emblem by myself
Keep up the good work
Respect❤️
What tipe is yeti? Engine,drive? Are you still drive yeti? Great work,thanks!
Yeti is a 2010 1st gen model, with 1.2l petrol engine with 7 speed dsg gearbox. It's my wife's car and yes she still drives it. She loves ❤️ it 😀. It is a great car
@@4WheelBuilds I have 1.2 tsi 6.gear manual. 2011 and yes,yeti is great car🙂 Did you change engine chain?
@@pravda9572 no not yet, our one had just passed 100k km so not needed to be done yet
@@4WheelBuilds I have 150k and l change chain.I change chain myself.I put the vider and stronger chain,for newer model(model after 2011), its improved chain who cant slip over the gear.But if you put new tipe of the chain you must replace lover gear(crancshaft gear). I also replace oil pump chain.Wash and clean oil sump and clean the oil pump filter.If you wont to all be perfect you must doit yourself🙂
@@pravda9572 great job, indeed I believe in a diy approach if you want things done right.
Thank you so much.
@@naveen.m.sneverseenbeforem7885 you're welcome 😊
❤
Замок крышки багажника поменяйте и будет у вас свет работать в багажнике.Это концевик не срабатывает
Thx for the tip 👍
@@4WheelBuilds У меня тоже не работала лампочка.Потом узнал,что она завязана с концевиком замка.Поменял замок и всё заработало.Эта проблема часто встречается на йети...
We've now sold our Yeti so cannot test this but thank you for leaving a comment, could come handy to one of our viewers in the future.
Good video thankyou 👍🇬🇧
Thanks you for your support and wish you all the best for Xmas 🎅 🎄
@@4WheelBuilds and A Happy New Year 🥳
@mark L Chapman indeed 🥳🥳🥳🥳