I'm not going to complain to Hasbro about Major Bludd's uniform, it's one of the few times they got it close to their cartoon/ comic book look. Like you, I can't help but part swap when it comes to having too many of the same figures, I have to make every one look a little bit different from each other.
Burn the shit down and like your draws had me in stitches IronKen! lol Thanks for the demo! I am thinking of painting a Scarlett body off eBay to amke it look more like the original one. Have to find a head sculpt for her since the figure didn't come with a head.
Thanks. .I’ve been wanting to try this but I needed to see it done before I tried. I’m going to go switch Duke and Flints legs now. Again thanks, and now I know
So easy! Again thanks. I’m still doing some work on them. Little bit of paint here and there..I’ll do a video on my channel to show what I’ve done. Oh yeah that major blood looks sick dude.
You know the type of error we are living in when you have to remind folks not to burn yourself with hot water . Yep , 80's and 90's good times! Baby 😂😂. Good looking out for the want to know how community 😉✌
Thanks for the demo Ken. And knowing is half the battle. It would be hilarious if 3 Stacks did the PSA after the cartoons. "Kids if you burn down your kitchen while messing around on the stove with your classifieds ... thats on y'all. And knowing is half the battle". G.I. Joe!
had no idea the crotches were so easy to swap. I've done a lot of customs with other figures and even though I'm a vintage Joe guy I haven't pulled the trigger on the classifieds yet. I may do so now, thanks for the info. 👍
Do you know if Lady Jay's legs would pop off as easily when heated? I'm considering mixing and matching the darker legs from the first release with the brighter torso from the retro card to give her a two-tone look similar to the old cartoon. Not sure if the two greens will look good though.
If you gonna do a lot of customizing I recommend you get a cheap (one for about $12.99) hobby hot air gun, works as good as the hot water method but you save yourself the burns just, hold it about six inches from the part.
Is it possible to replace the hip joint? One of those ball pegs is severely stressed for me, and I'd like to be able to replace it if it sheers off. I think the waist is just on a mushroom swivel, right? If that's the case, then it'd be a matter of cracking open the hip?
Thank You for doing this video Ironken3000. Does figure size change? Like flints legs/waist on roadblock? This has been the first video I've seen on customization for Joe's so thanks again!
Roadblock gungho are the same size but bigger than the others. Zartan was a little bigger than major bludd but it worked. Flint and roadblock probably wouldn't work as flint is smaller but who knows I never tried 😁✌🏽
Yo Ken how come you don’t just pop out the torso from the lower body? Swap the whole lower body at once? Seems like unnecessary steps as the torso pops right out as well?
I'd like to add that too much heat can cause weird warping at least it did on old joes also you can toss some rit dye in that pot and change up colors though it only gets darker So don't expect to lighten colors.
I've been kinda doing the same thing. Though it's with Marvel Legends and it's from the thigh cut down. I might try doing this with the full leg next time.
That's cool of you to wait for extras, so everyone can get some. TOO bad for all of us, there's too many scalpers that buy out everything and bust the prices up on ebay.
Yo king, can you pull them apart at the thigh swivel? I want to swap my viper legs so the red stripe match on the outside, idc about the pockets being inside but wouldn't need to pop at the ball joint if the thigh cut comes apart. That mismatched stripe drives me nuts. I'd then swap feet from side to side. I'm afraid to try and break it..
@@ironken3000 lady jaye comes to mind lol good idea thanks 👍 and I just looked for them faction force turrets, they had everything but so I picked up kharn and a weapon pack to see what I can do with it. Thanks for that vid and keep up the great work!
On Marvel Legends, can you take out the legs the same way at the ball joint and do those have a diaper the same way as the GiJoe figures? I want to make a General Hawk custom with the ML movie Vulture torso and add the Erik Killmonger legs on it. I never done this before.
O.O Wow!! That was awesome!! I've only heard about these figures around two months ago when a local store started selling these figures & I have 15 figures so far(under $30 a figure is reasonable & affordable that matches quality). To hell with some e-bay idiot for selling a figure at $10,000.!!! To us poor adults growing up, & getting to be a kid again... GO JOE!! * born 12-11-1983 and thinks about Baywatch when he thinks about SCARLETT * Do the arms pop off too, to get vests off of figures or do I need an Exacto knife? I've created my own characters too, years ago plus turned one 3.75 in figure into Joe Musashi from the Revenge of Shinobi Sega Genesis/Game Gear games & the first Green Ranger... So yeah. Thank you for reading & try to have a good day.
I thought I was the only one that felt like Major Bludd’s bottom half of the figure, is a little lacking... *pause I’m really digging your customs! Totally agree with not having to repaint parts... plug and play all day!
swip-swap, flippity-flop. Thanks for the new phrase for boil and pop. Appreciate your video
Absolutely great video!!! Thanks so much!!!
I loved how you customized the Twins into the red crimson guard suits brother.
Thanks 🙏🏽
Absolutely love this! Thanks!
Nice educational video my man. Didn't know you liked playing with your JOES underwear though LOL!!! MY MAN!!!
See how it's like some drawls? LOL! Cool BRO!
🤣🤣
Thanks for the no bullshit lesson...now i can take my Baroness apart for her repaint...
Its the safety precautions laced with expletives for me……well done sir😂
😆
I'm not going to complain to Hasbro about Major Bludd's uniform, it's one of the few times they got it close to their cartoon/ comic book look. Like you, I can't help but part swap when it comes to having too many of the same figures, I have to make every one look a little bit different from each other.
I hear you just made too customs a head swap on Wwe Otis N Cader makes a custom Leon White from away n a.more violent looking Otis.
Cool!!! Now I know...And, Knowing is half the battle!!!! Thanks for the info!!!! Yo Joe!!! Peace!!!
I should have ended with that 🤦🏾♂️ missed opportunity 🤣🤣😁✌🏽
This is brilliant! Thank you for the idea! There is so much joy to be had in swapping parts.
Thats cool, with the hot water. Back whn i was a kid i used customise my gi joes bcuz it had those small screws on the bck & inner legs.
Wow thanks. I knew the legs were removable but I always thought I'd have to paint the crotch to match new legs after swaps. Awesome video.
Thanks. Very helpful!
This man is a national treasure. Flip flop swippity swop.
Good stuff, great video!
Dope customs. Endless soldiers for sure
Burn the shit down and like your draws had me in stitches IronKen! lol Thanks for the demo! I am thinking of painting a Scarlett body off eBay to amke it look more like the original one. Have to find a head sculpt for her since the figure didn't come with a head.
🤣🤣
LOL!!!!!!!!!!!!!!!!
Thanks. .I’ve been wanting to try this but I needed to see it done before I tried. I’m going to go switch Duke and Flints legs now. Again thanks, and now I know
So easy! Again thanks. I’m still doing some work on them. Little bit of paint here and there..I’ll do a video on my channel to show what I’ve done. Oh yeah that major blood looks sick dude.
Would love a video on how to remove arms to show how to swap vest.
Great to see it in action.
And your mix-and-matches for Flint, and Zartan/Major Bludd are bad ass!
WELL DONE!
You know the type of error we are living in when you have to remind folks not to burn yourself with hot water . Yep , 80's and 90's good times! Baby 😂😂. Good looking out for the want to know how community 😉✌
🤣🤣😁✌🏽
Wow that Major Bludd is amazing!! Couldn't agree more. Stalker looks awesome too! Nice work!!
How he make it? And what the song at the beganing it sounds like monkey ball
That stalker is on point
Thanks 😁✌🏽
I'm getting a venom snake vibe off your custom bludd. Looks killer man
Thanks for the demo Ken. And knowing is half the battle. It would be hilarious if 3 Stacks did the PSA after the cartoons. "Kids if you burn down your kitchen while messing around on the stove with your classifieds ... thats on y'all. And knowing is half the battle". G.I. Joe!
🤣🤣🤣 missed opportunity but PSA or on the way 😉✌🏽
🤣🤣🤣🤣🤣🤣🤣
Trade secrets! You the man.
That’s the shit! Man those figures look better than the original …
Thank you for this tutorial!! Dope!!
Extremely intuitive thanks for this tutorial. The major bludd needed more paint apps!
had no idea the crotches were so easy to swap. I've done a lot of customs with other figures and even though I'm a vintage Joe guy I haven't pulled the trigger on the classifieds yet. I may do so now, thanks for the info. 👍
Great idea, swapping Zartan's bottom with Major Bludd's...they look better!!!
Thank you soo much for showing us how poping happens
Nice job on that Major Bludd man!
Do you know if Lady Jay's legs would pop off as easily when heated? I'm considering mixing and matching the darker legs from the first release with the brighter torso from the retro card to give her a two-tone look similar to the old cartoon. Not sure if the two greens will look good though.
It should
Thanks for this tutorial bro! I couldn't find one anywhere for Classifieds! 🔥🔥🔥🔥
#kitbashtime
Just found this cuz I plan on switching legs for storm shadow and snake eyes thanks so much man
That Stalker is so cool. I consider him one of the main Joe’s (due to the old comics) and it’s sad that Hasbro seemingly doesn’t.
Thnx for posting. Great video! DOPE swap w/ Major Blood. No need to apologize for collecting as many as you want.
I want a like X10 button for this video. Nice.
That rubber crotch piece is really handy. I swear, I never said that before.
They all look great! Love that Stalker!!!😁👍
Maybe we will get one in the Classified line down the road!😁👍
Nice . If you collect wwe figures they can incorporate with each other n then whoever hS both can make some crazy 😜 🤪 Customs. Hell yeah nice work.
The Hot water will eventually take off some of the paint / clear coat .20 minutes with the hair dryer works well for to protect the paint application
I heard the hair dryer for too long could cause warping
Yes sir
Excellent execution
I think I owe you an apology for the other day. I thought you was trying to be one of those clown dudes.
You crack me up bruh lol
That is the safest way my opinion, the heat gun scares me
Yeah heat gun is overkill might melt it instead.
Extremely helpful video man. I've been way too confused abt the whole diaper thing. Now I can make a proper custom daredevil.
Thanks 👍
If you gonna do a lot of customizing I recommend you get a cheap (one for about $12.99) hobby hot air gun, works as good as the hot water method but you save yourself the burns just, hold it about six inches from the part.
Thanks man I was wondering how that shit worked.
Thanks
This line is rad
Is it possible to replace the hip joint? One of those ball pegs is severely stressed for me, and I'd like to be able to replace it if it sheers off.
I think the waist is just on a mushroom swivel, right? If that's the case, then it'd be a matter of cracking open the hip?
I would not have the slightest. I never ventured to taking apart the waist
What do you recommend to change neck pegs? I wanna swap out the series 1 snake eyes neck peg for the commando one
I only popped it one time I can't really remember as it's been so long. It definitely comes out be careful 😁✌🏽
Thank You for doing this video Ironken3000. Does figure size change? Like flints legs/waist on roadblock? This has been the first video I've seen on customization for Joe's so thanks again!
Roadblock gungho are the same size but bigger than the others. Zartan was a little bigger than major bludd but it worked. Flint and roadblock probably wouldn't work as flint is smaller but who knows I never tried 😁✌🏽
Yes I do the same thing cuz . 🤔🤔I love these Joes cuz . 🚨📛📛📛📛📛
💯😁✌🏽
Yo Ken how come you don’t just pop out the torso from the lower body? Swap the whole lower body at once? Seems like unnecessary steps as the torso pops right out as well?
Didn't know that 🤷🏽♂️ thanks might try one day ✌🏽
@@ironken3000 gotta look out for one another my man. Time is money 💰
I'd like to add that too much heat can cause weird warping at least it did on old joes also you can toss some rit dye in that pot and change up colors though it only gets darker So don't expect to lighten colors.
I've been kinda doing the same thing.
Though it's with Marvel Legends and it's from the thigh cut down.
I might try doing this with the full leg next time.
That's cool of you to wait for extras, so everyone can get some. TOO bad for all of us, there's too many scalpers that buy out everything and bust the prices up on ebay.
You could probably use that Flint head for a custom Punisher
Yo king, can you pull them apart at the thigh swivel? I want to swap my viper legs so the red stripe match on the outside, idc about the pockets being inside but wouldn't need to pop at the ball joint if the thigh cut comes apart. That mismatched stripe drives me nuts. I'd then swap feet from side to side. I'm afraid to try and break it..
You should be able to buy just to be safe. Try a easy replaceable figure first.😁✌🏽
@@ironken3000 lady jaye comes to mind lol good idea thanks 👍 and I just looked for them faction force turrets, they had everything but so I picked up kharn and a weapon pack to see what I can do with it. Thanks for that vid and keep up the great work!
On Marvel Legends, can you take out the legs the same way at the ball joint and do those have a diaper the same way as the GiJoe figures? I want to make a General Hawk custom with the ML movie Vulture torso and add the Erik Killmonger legs on it. I never done this before.
Legends are a little different no diaper crotch.
@@ironken3000 Thanks!
O.O
Wow!!
That was awesome!! I've only heard about these figures around two months ago when a local store started selling these figures & I have 15 figures so far(under $30 a figure is reasonable & affordable that matches quality). To hell with some e-bay idiot for selling a figure at $10,000.!!!
To us poor adults growing up, & getting to be a kid again...
GO JOE!!
* born 12-11-1983 and thinks about Baywatch when he thinks about SCARLETT *
Do the arms pop off too, to get vests off of figures or do I need an Exacto knife? I've created my own characters too, years ago plus turned one 3.75 in figure into Joe Musashi from the Revenge of Shinobi Sega Genesis/Game Gear games & the first Green Ranger...
So yeah.
Thank you for reading & try to have a good day.
I thought I was the only one that felt like Major Bludd’s bottom half of the figure, is a little lacking... *pause
I’m really digging your customs! Totally agree with not having to repaint parts... plug and play all day!
On the next episode cooking COBRA with
IronKen
Pop and swap
Emma Frost legs with black cat
Baroness 🖖🖖
🤣🤣🤣
Were you able to pop the waist ball joint?
Nah I never popped the waist
Hey man, do the arms pop off too?
Yes
Also I wanna pop the chest armor off firefly how to do that , please show how to pop butterfly hand joints
Pop the arms and the vest should go over the head
Any tips on removing the pelvis piece? Does it just pop off?
Now that I couldn't tell you 😁 that's beyond my skills.
Swip, swap...
I accidentally burnt down my mama’s house! Thanks a lot Iorn Ken!
No don't do that 😁✌🏽
@@ironken3000 Now you tell me, I’m sure she has home owners insurance. The figure swaps turned out thou. That’s the important thing. Lol 😆.
🤣🤣 hey new house alright 😁✌🏽
@@ironken3000 love the channel man, keep them vids coming, ✌️
How easy it to do the head swap?
Super easy 😁✌🏽
Ok I’ll have to give it a try
Can you do this with Action Force as well?
I don't know about action force don't collect it
@@ironken3000 Okay bruh. Appreciate you answering tho
same process for the head?
Head pops off when you pull it off. Also has a neck with ball joint never tried that.
thank you . . . time to heat them up!
can you also remove the crotch piece (the hard plastic inside the rubber crotch piece)? is it safe to remove it?
Haven't tried that yet
What that song in beganing
Lol its a fluke! Duke + flint = fluke
Good one🤣🤣
@@ironken3000 now you got me hunting for ZARTAN so i can swap them legs out for my Mbludd. Bad ass video
That Stalker is nice
@@jpvxray i know right. Where did he get the head from???
@@millcitychris4303 looks like legends Blade?