RSLogix 5000 Add On Instruction Use - AOI Use
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- This video shows how to use the Add-On Instruction we made using RSLogix 5000 which is the same process for Studio 5000 Designer. Using the Rockwell platform for AOI is an excellent way to make programming a quick and easy process.
Check out our training center:
www.allen-brad...
Also, check out this video: • RSlogix 5000 Add-On In...
Here is the link to the first video where the AOI was made:
• RSLogix 5000 Making An...
onlineplcsuppo...
/ onlineplcsupport
#Add-On Instruction
#Emulator
#FactoryTalk
#Training
#RSLogix 5000
#Studio 5000
*Check out our training center:
**allen-bradley-plc-training.teachable.com/*
You still got an accolades from me after two years of this lovely piece.
Great job showing how to use the add on instruction in a Rockwell PLC.
Thank you for the kind words
You Are A Good Teacher Shane!
Thank you
You really are a good teacher! Thank you
Thank you, glad to help
Aprecio mucho vuestra gran ayuda, no se imagina lo que hemos aprendido gracias a su generoso aporte, una vez mas muchas gracias...
Best video thank you! And you included function block!
John Mayberry
Glad you liked it, any ideas you have or would like to see the new just let me know.
Thanks for the support,
Shane
Hi Shane
Thanks always for your kindness and willingness to help to help the TH-cam community.
I truly appreciate it. Now what I have going on is an AOI in FBD, but my inputs and outputs are all on the same side of my AOI so My output wires don't connect. This is my 1st time trying so if you can let me know what step did, I miss setting up my AOI. RS Logic V20
Thanks
Darren
Make sure your tag parameter type is correct for the add-on instruction tags. make sure outputs are outputs and inputs are inputs.
Also, you can make them visible and not visible in the add-on instruction properties as well.
Hope this helps
I have all the tags as bools outputs.
what is you email address.@@ShaneWelcher
Awesome Shane!
FERNANDO GARCIA
Thank you for the support
Hi Shane! Have you simulated RSLogix Version 30?
Also what is argument column in the AOI for?
Yes, I have but only with the emulate version 30 as every emulate has to have the same emulate as the version of the software used. I have several versions of AOI but haven't published yet.
THANK YOU VERY MUCH.GREAT JOB
You’re awesome
You are now my sensei 🫡
Appreciate your comment
What would be the best way to organize the parameter tags? Is it possible to have a master array for a single type of add on instruction that has an array element for each instance of the AOI that contains all the data necessary for that instance? With the method you show here it creates a new differently named array for each AOI instance as well as new I/O tags that are not contained in the new instance array. Thanks for the video and your help!
@@nashbryce6693 Creating an AOI makes different tags for each instance of its use therefore there is no master array, it would be an independent array for that instruction use
great job done there!
Kofi Bonsu
Thank you for your support
Thank you very much , great job
Glad to help
Thanks for the support, I have more information that could help at OnlinePLCSupport.com which is not finished but does hold a great deal of support info.
I may have missed this but instead of creating a tag and aliasing it to an IO address, could you put the IO address directly into the AOI? Is there a benefit of doing it one way over the other?
It's best to alias the bit because of multiple uses of the AOI although yes, you can use a standard input
Very good video.
Palwinder Singh
Thank you for the kind words
so good for videos
Thank you for the support
Good job and excellent presentation; you should be a teacher. By the way how can I get the emulator 5000 and RSLogix 5000 softwares?
Blulus
Thank you, if you happen to have any ideas or needs then let me know and I will make a video about that topic.
Thanks,
Shane
thank you so much
When is your next video? :D Keep it up!
I have videos producing every week however I would like some ideas about what you would like to learn from. If you have any ideas then send me a comment back about them and I will make a video for training.
Thanks,
Shane
Hi, I have followed instruction after created AOI function called for Main loop, I did not add found the New tag options when right click
Maybe these videos will help out friend.
More Add-On instruction videos.
th-cam.com/video/PWg9bl5-k0w/w-d-xo.html
Hi Shane, Great video, do you have a topic for the new powerflex 527 drives, using motion? (this is the only way to control theses drives now) only to start, stop, reference for a Fan or pump for example????
I could make one when I have time, I am on a project right now that is eating up my time. Do you want setup, config, and control?
Hi Shane, i can do the setup without problem, its just using the Motion commands to start, stop, and speed reference etc....Im confused with the motion commands, do I use MAM or MDO to start the drive, any help would be greatly appreciated Ian
Here are some of my older videos that should answer your question as far as controlling a servo which is how you show control a CIP drive.
Motion video 1
th-cam.com/video/g_cdsbx6aAQ/w-d-xo.html
Motion video 2
th-cam.com/video/9IrSTv3EZq0/w-d-xo.html
Motion video 3
th-cam.com/video/bM052YRBzZM/w-d-xo.html
Motion video 3.5
th-cam.com/video/1fbNXqMrku0/w-d-xo.html (sound quality is low...sorry)
Motion video 4
th-cam.com/video/nO1ZVkQFFTk/w-d-xo.html
Hopefully these help out, let me know if I need to clarify anything.
Sorry about the sound quality, these are when I did not have a condenser mic.
Thanks,
Shane
this very good
Kalleweed
Always happy to help, any ideas for future videos then just send them my way.
Thanks,
Shane
how can i get more training from you
Just send me an email at plcsupport@onlineplcsupport.com then we can talk more about what you would like to see ad how I can help.
Thanks,
Shane
i did send you an Email about 2 hours ago but no responce
Kalleweed
I sent out a response about five minutes ago, did you not get it?
It was from my personal email
Is there a way to modify anything inside the AOI once created ?
Yes
Thank you
@@goranhikl5723
You need to do that offline, in some instances, unlock it if the vendor locked it
Plis in spanish thanks
Google translate may help you out my friend, sorry but I do not speak anything but English, I could have it translated but I am not sure.