Dang, Traxxas Engineers. I’m 7:20 in and that’s a lot of screws you’ve had to remove so far. They couldn’t of out this together using less screws…..lol I would of already been getting frustrated and nervous knowing this all has to be put back together and I’m gonna screw up (no pun intended) which screws go where….lol
So my question would be.... The addition to the tie straps added to the bulkhead and shock towers. The way I did it, I had to stretch the upper arms Part to make it fit because of the strap being an additional 3mm+ the way you did it had to be more.. Or did I miss something, and you had a way of making up the 3mm to the upper arms. I hope that makes sense. Thank Have Fun
Hello guy 🤘 I appreciate your content 👍 I really like to maintain and improve my RCs so I'm going to make this modification on the front bulkhead because I broke a piece again in the Skatepark! Grrrr But suddenly how do you fit the upper triangles with the thickness of the rear plate in addition? Good job and good bash, had a good holiday from Noeil brother 🎄☃️ peace 🙏
@Earl Moorhead , we don't understand😀 I made the modification at the front but it is necessary to remove material from the 2 upper triangles, which solution did you choose?Thanks man in advance 🤘
@@NelsRc73 I’m not sure what triangles your talking about on the xmaxx the shock tower need to be trimmed and the upper control arms as well not sure what triangle you are looking at ?
@@earlmoorhead5555 we finally understood haha, you called it control arms and I control triangles so the main thing is that I understood that they had to be cut to be able to fit them in
You should really be part of Traxxas research and development team …… Hey Traxxas if your watching this is your guy 🤘🏼
Watching you wrenching on the rc's is therapeutic. Merry Christmas Earl 🎅
Thanks merry Christmas 🎁🎄
I'm doing a complete overhaul of my xmaxx & I'm adding the wide arm kit . Great video , not as complicated as some others 👍
All Right Still in the top 10.👍💯
Notification squad 👌💯👍💪
GPM sells a 2 pack of the tie bar I bought a pack on Amazon for $16.
GPM 2Pcs Upgrades Stainless Steel Front/Rear Upper Bulkhead Tie Bar
Dang, Traxxas Engineers. I’m 7:20 in and that’s a lot of screws you’ve had to remove so far. They couldn’t of out this together using less screws…..lol I would of already been getting frustrated and nervous knowing this all has to be put back together and I’m gonna screw up (no pun intended) which screws go where….lol
You get a good feel of where screws go. If you take a part out, put the screws back in said part so you know where they go
That whole XMAXX needs the DISHWASHER remember HOT POT AND PAN wash cycle works GREAT😜
Pot & pans or mine might need the washer addition Hot & spin cycle with bleach 😱😳⚠️😂
✌️
👍
Alriiiight soon as this blizzard is over I'm taking mine in the snow
Nice
@@earlmoorhead5555 high temp is gnna be 1 degree so maybe not😭
Hey Earl I see your work 💪on xmaxx I love the truck it' amazing rc all I has to say cool truck bas 😎 xmaxx all right
Thanks I like it as well 🎉
Did you see that vitavon has a bell crank for the XRT now?
Yes problem is shipping to California 😳
So my question would be.... The addition to the tie straps added to the bulkhead and shock towers. The way I did it, I had to stretch the upper arms Part to make it fit because of the strap being an additional 3mm+ the way you did it had to be more.. Or did I miss something, and you had a way of making up the 3mm to the upper arms. I hope that makes sense. Thank
Have Fun
I trimmed the upper arms as shown in my XRT upper bulkhead mod did the same thing to that rc 👍💯
👊👍
Notification squad 👌💯👍
Did the crawlers that were in the drawing get given away. Asking for a friend.
Hello guy 🤘 I appreciate your content 👍 I really like to maintain and improve my RCs so I'm going to make this modification on the front bulkhead because I broke a piece again in the Skatepark! Grrrr
But suddenly how do you fit the upper triangles with the thickness of the rear plate in addition?
Good job and good bash, had a good holiday from Noeil brother 🎄☃️ peace 🙏
The upper support doesn’t touch it on the xmaxx ?
@Earl Moorhead , we don't understand😀
I made the modification at the front but it is necessary to remove material from the 2 upper triangles, which solution did you choose?Thanks man in advance 🤘
@@NelsRc73 I’m not sure what triangles your talking about on the xmaxx the shock tower need to be trimmed and the upper control arms as well not sure what triangle you are looking at ?
@@earlmoorhead5555 we finally understood haha, you called it control arms and I control triangles so the main thing is that I understood that they had to be cut to be able to fit them in
All Right First 👍🔥😎
🎉👑✅👌
Oh yeah top 10 again!! Where's old beast mode RC? You got a limitless I want!!!
Notification squad last I heard he was sick 😳🤷🏻♂️
Do you need to modify the upper arms to fit over the tie bar modification? 😎💯💯💯
Yes just like I did on the xrt
Why did you get 2 of part 7726? Were both for the front upper bulkhead? Did your truck no come with one already?
Bec I’m doing both my xmaxx’s
Does this mod need to be done to the rear bulkhead also, how about just upgrading to aluminum bulkheads, would that be better?
Did your XRT front end mod hold up ?
Idk haven’t ran it yet
Nice job man. It looks easier on an xmaxx vs an xrt
Yes for me it is 👌
Hi zack
Who is Zack ?