Watching you fly whoops indoors is kinda like watching quadmovr fly outside.. constantly wondering, "How the hell is he doing that?" lol. Great video as always!
I've been using my air 75 for a few weeks now, and loving it. A much better experience than I had with the Analog 2024 mobula 6, at a much lower price. I was a bit overwhelmed trying to manage it indoors at first. But it's definitely doable, and adapting has improved my throttle management.
Finally air75 review. Thank you Nick. Ordered this new board and combined it with 23000 0702 happpymodel motors and meteor 65 pro frame. Have 4 minutes of pretty aggressive flying. Drone fly so good, recommend to anyone who don't need to race and just want to do some freestyle or Nick style flying.
This quad is so much fun that I bought another one! Going to try a few different tri-blades just for the heck of it, but it flies great with the stock props.
Nick I always look forward to your reviews and the time and effort put into them - if I didn’t already have an air65/air75 your reviews would convince me :)
All my gears been in cases for a year now, regs and restrictions killed it for me. But this little guys reminding me of my beginnings and love of carefree whoop fun! Hard to choose between the 65 and 75 though
Great job, purchased the Air 75, don't have but a few analog drones, still using Fat Shark HDO2 goggle, just not sure I want to invest in the new HDzero goggle for the 3 analog drones I own, really got more into the Dji 03 and Walksnail Avatar. Just haven't got to the level of pilot that I can notice latency. But I have friends that really like analog and are pushing me to give it a change. More information than you need, but I truly learn a lot from your videos, one of the few people I know that is not dependent on his youtube channel to make a living. I truly appreciate the honesty in your videos.
@@NickBurnsFPV oh .. so I should just wait for that then.. instead of buying a whoop lite vtx to put on the air75 I have with a bum vtx. Is the hd0 aio using composite or mipi?
Attention: 1. The canopy is under stress and has to be relaxed with a heat gun, then it is very resistant. 2. Pads for ufl connector on pcb are very thin and can come loose after a crash. Hot glue the area around the ufl connector!
@@YourdailydoseofShorts-un5vi Actually I used it on mobula6 2024, because original camera was broken after lots of crashes and I replaced it with c03 camera and canopy from air65.
3:06 77mm?? Whoa I actually thought it was going to be close 81 or 82mm just like there Meteor 75 is Nick. Awesome job on both indoor and outdoor flights Nick as always I enjoyed those dive attemps through the pergola too👍😎👍
When the frames sit flat on the motors we get a more accurate measurement. With the frames that site on the battery tray we might measure another few mm due to the motors bowing down during measurement.
I am hearing using a heat gun on the flex points help the canopies reshape to the mounting arms new bent position and makes it more durable, but be careful not to heat up the camera or AIO.
Fantastic flying and review, Nick! 😃 But I still didn't forget when you flew a 5" thinking it was a 3.5"... 😂 Anyway, stay safe there with your family! 🖖😊
Great review Nick, as ever :) What a technological progress since the early days of whoops. It’s crazy and quite enjoyable! I’m btw also among those who like 75mm indoors. I guess it has to do with the lines. If you have no significant straight (eg., heads garage) then a 65mm makes sense.
Amazing review as always. I really love your flying style and I would love to see a stick cam on every flight on your videos. Or maybe give us a lap or two with a stick cam. ☺️
Pretty cool, thanks for this amazing review. What would happen if I add additional 39 gram camera on it? will it still be flyable? I know it's not the purpose of this tiny quadcopter, but I'm thinking about my next cinematic setup, by adding the insta360 Go 3S or the Runcam Thumb 2. Also adding a GPS on it, would probably be possible right?
well, its going to fly for a very short time and it would likely be a moderate cruise. It would also likely be much more likely to break easily with the more than double the quad weight.
@@NickBurnsFPV I see, makes sense, guess I'll have to think about it. I did watch your other videos where those micro drones also have DJI o3 onboard, seems pretty cool, I wonder when DJI will release o4, then it might be my optimal setup for traveling footage. Thanks for sharing, it's amazing new world to me, all of those tiny little drones :)
I find the price is a winner in to days world, ordered one, still waiting for it. Think I am going to go ahead and order a addition frame base on my flight skills😊
Nice! Camera looks a bit dark, especially indoors. Could that be caused by RapidFire, the camera, or perhaps even the OSD chip like some of the newer NewBeeDrone flight controllers?
Loving my air65. My first and only tiny whoop. Done about 50 packs through it and starting to really build confidence in flying faster and tighter spaces. The raceband definitely felt like it was putting out more than 25 mw I could fly behind my garage and side of my house without too much issue. I switched bands and left it at 25 mw and didnt get that kind of penetration. I think the guy that tested it said it was more like 200 mw on raceband ? but normal output on the higher ones if I'm not mistaken.
How much time do you usually spend editing a video? What is the biggest hangup you have while editing? I'm mostly curious but also trying to help other optimize editing.
okay, dang it I replied once and youtube zapped it. Editing takes about 90 minutes. Biggest hang up is usually the flight audio. The dvr and flight audio camera don't seem to sync perfectly even though both files are 60fps, and I try to get it as "perfect" as I can.
Is the connector the same as the one for Newbees 65? Are the pads accessible for soldering the camera in? I like the way the beta fpv did the board. The impact zone from a head on crash was removed and stacked.
The whole 65mm vs 75mm thing seems to boil down to 65mm inside and 75mm outside. And if you’re already outside, then maybe 3” or bigger. Your yard though is perfect for that 75mm size.
Unfortunately no. DJI isn't compatible with analog. These whoops are generally analog. The old DJI V1 and V2 goggles we can add an analog module and plug that into the dji goggles to make it compatible.
lol thanks, its fun to wizz around. No the motors are bushings. I think newbeedrone might be one of the few companies offering bearings in whoop motors.
i really want to buy the air75 right now! i was wondering which headset you had and which controller also if possible, i dont know if you are using your daily fpv gear or if you have a different headset for this particular tiny
Pulled the trigger on the crossfire version. Flys very very good. Mine however gets ridiculously hot! It cannot sit for anytime at all before core temp warning pops up. It gets so hot that the blob of hotglue i put on to hold the vtx antenna connection tightly just melted 1st flight.
Flew this for about seven minutes and noticed that my signal was completely going out and the drone was only 20 feet away 30 feet away. So when it landed, the entire antenna was ripped off and the little button that it snapped onto you that was ripped off the board as well so that’s cool so now I get to wait another three weeks for a beta FPV to a new controller, which is also interesting. I hope everything clips on and off I’m not trying to do little micro Soldering. Lol. I love the little thing though it zips around super lightweight and it goes pretty far for 400mw vtx
hi Nick that's amazing how you can fly that fast! i bought 2 air65 but im waiting for the charger yet to come! i have one question that i always want to ask but there is no one to answer.. its the 4 asterisk star like appear in your google.. what is it mean? appeared in your goggles after 6:15
Thank you. I am not sure myself what that is an indicator of. Its one of the betaflight warnings, but not sure which it might be, I need to review the warnings and see what it might be.
So, fc wise, between betafpv meteor75 pro and the new air75, which of the two would last longer? I heard the new air75 fc has got more uart ur something like that? So besically what changes is the built of the drone and weight or also the new fc is better or more durable?
I am only a sample of one, well I have two air65s and only one meteor75, which I might still have. Hard to say about durability as they both of the air65s I have are still running and I haven't flown the meteor75 in awhile.
85 would be best suited outdoors, unless outdoor is like a play ground and you want to run through the small gaps those have. 85 is going to be much much more difficult indoors than a 75mm
I preordered this guy last week. Was really torn between the 65 and 75, since I want to fly in the house in the MN winter, but also outside and it's always quite windy. I went with the 75. I wonder if there's a little whoop that is especially quiet for indoors. Open to suggestions from anyone. My Blade Torrent 110 from 2017 gave up its smoke this summer, and my Blade Inductrix FPV + died last winter, so I need something else.
Do you think this has enough power to add Walksnail 1S to it? I am thinking of swapping the frame and motors from my Meteor75 Pro HD with the Air75 frame and motors, total weight about 30g (down from 37g).
I’m with both of you. Beta takes the crown on failures over the last years. Their 1s was burning itself out. Before that the leader was clearly HM, with crappy escs and failing Vreg :)
I fly the same, sometimes I wish i could freestyle like Heads over at Infinity loops or think, dam better practise some ladders to fly like TDog. Then I end up just flying around doing what I want having a blast 😅
That's a nice piece of kit. I'm gonna hold off a bit for a HDZero eco version or something.. I can't outright justify another analog whoop when I have a few already, hehe.
@@andrewy3711 yep, I just don't know much more than what I have in hand. Flies really nicely and for an hdzero whoop we can't do any better for weight than a true hdzero AIO
@NickBurnsFPV LOL not sure how that happened, I was commenting on another video and it looks like it posted here. Love the video though thanks for sharing. :-)
Motors are the weak point of betafpv, the bell falls apart very quickly and they continue to install them. Personally, I need to install smaller propellers and higher KV, since the impact from the protection falls on the shaft. And they do not want to do anything about it.
Not really, they are pretty standard in whoops and micros. I suspect when you say broken, you referencing the ufl connection on the board rather than replacing a broken antenna, replacing the antenna should be direct swap.
@@NickBurnsFPV Thx for the reply! So it's been a few years since I have flown whoops because I couldn't stop breaking them. Are you saying that we don't have to solder dipole to AIO anymore?
@@Roundawg yes, I don't recall when, but sometime back the micro ufl connection took over for the vtx antenna mount. from time to time we do find where the rx receiver is a plain/naked wire soldered to the signal pad on the AIO
will work? As in mount into another 75mm frame? yes 65mm or 75mm frames mount most AIOs. the only exception being the "pro" frames that maintain 65mm or 75mm but use 35mm or 45mm props.
@@RenzFPV Sorry, what do you mean? in stock at FPV shops? The mobula7, happymodel v4, meteor75, fractal75, newbeedrone cockroach 75 frames will all work.
Im COMPLETELY new to drones and would love to start off with the air 75. Is there anyone who would be kind enough to explain exactly everything i need to buy or what videos to watch that will help get me flying?
The basics: You will need goggles with the same video system as the quad, we now have 4 different non compatible videos systems, DJI, Walksnail, HDZero and analog. Also need a radio, charger and likely a computer. Most get started with a ready to fly kit, which includes everything one would need to get started in FPV.
@@NickBurnsFPV akkvrx module. I haven't looked into firmware updates for it. Latest HD zero goggle firmware. Same setup working with stock mob6 2024 analog, and betafpv M03 vtx.. just doesn't like the air75 about 30% of the time. Tx power doesn't seem to matter.. tx antenna doesn't seem to matter. I don't have another analog vrx to try and validate it's solely the air75 and not something else. Thinking of getting the HD zero monitor..but hard to justify. Anyways thanks for your vids. Can't wait for the aio embargo to lift.
@@wva5089 Thanks for the details. My understanding is this is most often an issue with the camera. Even the same camera will have the rolling black lines (sync) on one quad but not on a different quad with the same camera. It has something with the manufacturing and the "sync pulse" of the camera.
the size of battery doesn't matter its the connection. All betafpv batteries come with the battery connection they designed the BT2.0, which the vifly 6 port charger does have bt2.0 connections. Short answer: Yes
@@NickBurnsFPV Hi Nick thx for responding, yeah came with crossfire rx. My trouble is a solid red light on receiver whenever going through binding process. IDK can you help/what ya think?
@@melvinstewart3718 Unfortunately its been years since I have used crossfire, my help maybe lacking. Googling around it might be to large a difference in firmware or the rx is stuck in bootloader mode. Hold down the bind button while powering up the receiver. Release the button after the LED starts flashing quickly. Press and hold the button again. When the LED starts flashing in a double pattern, release the button. Wait for the update to finish. The receiver will flash slowly when it's done, and then be ready to bind. Bardwell also has a video on this issue that might help th-cam.com/video/NyFFN3WXSok/w-d-xo.html
I love my Air75, except for one issue with the ELRS range. I'm lucky if I get 30 feet away indoors before the signal and link quality drops right off. I usually fly with 25mW output, but even bumping it up to 500mW doesnt seem to make more than a few feet of difference. I reduced the packet rate from 500 to 150Hz whuch helped slightly, but its still pretty bad. My Mob6 2024 in comparison can fly much further indoors on 25mW without getting a failsafe. Looking at Air75 flight videos on YT, it seems like some have a great signal and others are comparable to mine both indoors and outside. I'm guessing there's maybe some quality issues affecting some of these flat antenna receivers.
Jeg vil købe en af dine minidroner hvor du flyver hjemme i huset Stony fra Danmark her i Danmark er de helt vilde med dig du skal vide du er helt vild populær her i Danmark Copenhagen med venlig hilsen Stie basically FPV. Kan jeg bruge mine Dio coggels 2 til fine mini vaser droner på 1718 gram
![[Full] 4 ต่อ 4 Celebrity EP.922 | 10 พ.ย. 67 | one31](http://i.ytimg.com/vi/zmV5HRIxIBI/mqdefault.jpg)
Watching you fly whoops indoors is kinda like watching quadmovr fly outside.. constantly wondering, "How the hell is he doing that?" lol. Great video as always!
quadmovr is a magician. My LOS skills are so so bad. Barely hover :)
Same way you get to Carnegie Hall... Practice my friend!
I own this quad, and it is excellent. Great
Tune out of the box. Excellent.
Flight time, and it's under $100 dollar. Thank you for the video.
I've been using my air 75 for a few weeks now, and loving it. A much better experience than I had with the Analog 2024 mobula 6, at a much lower price.
I was a bit overwhelmed trying to manage it indoors at first. But it's definitely doable, and adapting has improved my throttle management.
Whoops are also my favorites! Usuallly fly 65 indoor and 75 outdoor. Thanks for the review!
Finally air75 review. Thank you Nick.
Ordered this new board and combined it with 23000 0702 happpymodel motors and meteor 65 pro frame. Have 4 minutes of pretty aggressive flying.
Drone fly so good, recommend to anyone who don't need to race and just want to do some freestyle or Nick style flying.
Also cuddos on the dives and craddles. Pushing yourself to try new things and they are looking good!
Always great info. Nice options from BetaFPV!
This quad is so much fun that I bought another one! Going to try a few different tri-blades just for the heck of it, but it flies great with the stock props.
I ordered the crossfire version and its on the slow boat.. im so excited to get it. It will be my first brushless whoop
Nick I always look forward to your reviews and the time and effort put into them - if I didn’t already have an air65/air75 your reviews would convince me :)
5:46 "they don't think my flying skills are quite there" well tell them to go and [redacted] themselves 😂😂
lol.
I think its a bit odd to tell another pilot how they should fly. We should be developing our own style and enjoying it.
@@StealthFlightFPV agreed!
@@StealthFlightFPV yea, but its the internet....a very large space with all thoughts and types :)
All my gears been in cases for a year now, regs and restrictions killed it for me. But this little guys reminding me of my beginnings and love of carefree whoop fun!
Hard to choose between the 65 and 75 though
I have both the 65 and 75 and I love them… they fling really nicely too!
LOVE my Air 75 but def need to get a 3d printed canopy. But it RIPS and feels good. Always A+ stuff from you Nick!!!
Thank you
Great job, purchased the Air 75, don't have but a few analog drones, still using Fat Shark HDO2 goggle, just not sure I want to invest in the new HDzero goggle for the 3 analog drones I own, really got more into the Dji 03 and Walksnail Avatar. Just haven't got to the level of pilot that I can notice latency. But I have friends that really like analog and are pushing me to give it a change. More information than you need, but I truly learn a lot from your videos, one of the few people I know that is not dependent on his youtube channel to make a living. I truly appreciate the honesty in your videos.
I took an air65. Put the FC and VTX into a air75 frame and used 0802 27k motors. Its my favorite whoop to fly currently.
made your own air75?!?!
DO YOU HAVE THE HDz AIO/whoop In hand yet ?!!
@@Mape26 yes
Wait why not just get an air 75 and swap out the motors?
@@NickBurnsFPV oh .. so I should just wait for that then.. instead of buying a whoop lite vtx to put on the air75 I have with a bum vtx.
Is the hd0 aio using composite or mipi?
Hi Nick, Great video and review of the Air75, I love micros and flying outside. A 75mm is perfect. Thanks for the video and info on this quad.
Attention:
1. The canopy is under stress and has to be relaxed with a heat gun, then it is very resistant.
2. Pads for ufl connector on pcb are very thin and can come loose after a crash. Hot glue the area around the ufl connector!
Already broke down one canopy - thanks for advice, will do it, once get new ones from ali.
@@alexanderkolyshko I have one additional canopy in the box. Check your product box, maybe you have overlooked it and have also a replacement.
can you do some tutorial for the canopy to be relaxed with a heat gun?
@@YourdailydoseofShorts-un5vi Actually I used it on mobula6 2024, because original camera was broken after lots of crashes and I replaced it with c03 camera and canopy from air65.
3:06 77mm?? Whoa I actually thought it was going to be close 81 or 82mm just like there Meteor 75 is Nick. Awesome job on both indoor and outdoor flights Nick as always I enjoyed those dive attemps through the pergola too👍😎👍
When the frames sit flat on the motors we get a more accurate measurement. With the frames that site on the battery tray we might measure another few mm due to the motors bowing down during measurement.
@@NickBurnsFPV WHOA!!!!!😮😮😮😮 My mind has just been blown Nick thanks for clearing that up
Nice presentation of good information. Pleasurable watch. Thanks Nick, you are appreaciated!
Thank you, appreciate the kind compliment
Helping the analytics!
Great review and flying.
Been loving my Air75, the canopy is easy to break but I guess that's why they include a spare 😅
I am hearing using a heat gun on the flex points help the canopies reshape to the mounting arms new bent position and makes it more durable, but be careful not to heat up the camera or AIO.
Heck Yeah! Sounds good. Enjoy the Breeze...👍🏻🍻👊🏻
Fantastic flying and review, Nick! 😃
But I still didn't forget when you flew a 5" thinking it was a 3.5"... 😂
Anyway, stay safe there with your family! 🖖😊
you as well
As always great job on the video..
Great review of a cool whoop from betafpv. 👍😎
You fly this quad so fast and well. Can it also fly slowly in angle mode? I have the Meteor 75 and Air65.
Oh certainly. Anything can fly slower and yes it has angle mode as well as acro/rate modes.
Seriously how did you learn to fly this good, I could only wish to fly like that holy cow!!!
No real trick or way, I just fly often
Great review Nick, as ever :)
What a technological progress since the early days of whoops. It’s crazy and quite enjoyable!
I’m btw also among those who like 75mm indoors. I guess it has to do with the lines. If you have no significant straight (eg., heads garage) then a 65mm makes sense.
heads, prefers 75mm as well :)
And his garage is freaky small and tight to do tricks :))))
@@nikotttin yes a single car. He is supremely talented for sure!
Really clear for analog.
Amazing review as always. I really love your flying style and I would love to see a stick cam on every flight on your videos. Or maybe give us a lap or two with a stick cam. ☺️
I think I have two stick cam videos on the channel.
Pretty cool, thanks for this amazing review. What would happen if I add additional 39 gram camera on it? will it still be flyable? I know it's not the purpose of this tiny quadcopter, but I'm thinking about my next cinematic setup, by adding the insta360 Go 3S or the Runcam Thumb 2.
Also adding a GPS on it, would probably be possible right?
well, its going to fly for a very short time and it would likely be a moderate cruise. It would also likely be much more likely to break easily with the more than double the quad weight.
@@NickBurnsFPV I see, makes sense, guess I'll have to think about it. I did watch your other videos where those micro drones also have DJI o3 onboard, seems pretty cool, I wonder when DJI will release o4, then it might be my optimal setup for traveling footage. Thanks for sharing, it's amazing new world to me, all of those tiny little drones :)
I'm getting one of these for sure!!! Would have loved to see the runtime on the Lava 450. Thanks for all you do!
I did charge them, but the flights have been minimal on them. From that I suspect they are on par with the Tinywhoop and webleedfpv 450 batteries.
Tyrantt's prowhooper contest is breaking me, I want one of these now.
I find the price is a winner in to days world, ordered one, still waiting for it. Think I am going to go ahead and order a addition frame base on my flight skills😊
Wow, leaves changing already on that small tree 😫
yes, fall is coming. Doesn't feel like it with the high 90s we have been having. Today is forecasted to be 102F
Nice! Camera looks a bit dark, especially indoors. Could that be caused by RapidFire, the camera, or perhaps even the OSD chip like some of the newer NewBeeDrone flight controllers?
Could be rapidfire, but I use the same goggle setup for all analog quads on the channel, since the rapidfire came out
Loving my air65. My first and only tiny whoop. Done about 50 packs through it and starting to really build confidence in flying faster and tighter spaces. The raceband definitely felt like it was putting out more than 25 mw I could fly behind my garage and side of my house without too much issue. I switched bands and left it at 25 mw and didnt get that kind of penetration. I think the guy that tested it said it was more like 200 mw on raceband ? but normal output on the higher ones if I'm not mistaken.
How much time do you usually spend editing a video? What is the biggest hangup you have while editing? I'm mostly curious but also trying to help other optimize editing.
okay, dang it I replied once and youtube zapped it. Editing takes about 90 minutes. Biggest hang up is usually the flight audio. The dvr and flight audio camera don't seem to sync perfectly even though both files are 60fps, and I try to get it as "perfect" as I can.
@@NickBurnsFPV mmm yah ok syncing audio and just syncing multiple clips is probably a very common editing hangup.
@@Shauny_D yep, syncing my desk camera with my desk microphone audio is much easier
Amazing video, thanks alot. How is it that your v-transmission is super clean even when you went down to basement?
I have a video linked in the description on my video setup and explanation.
Is the connector the same as the one for Newbees 65? Are the pads accessible for soldering the camera in? I like the way the beta fpv did the board. The impact zone from a head on crash was removed and stacked.
No the connector is Bt2.0. Yes there are camera solder pads on the AIO
Who else has been waiting like 3 weeks for theirs to arrive from betafpv??
Great job on the video…
The whole 65mm vs 75mm thing seems to boil down to 65mm inside and 75mm outside. And if you’re already outside, then maybe 3” or bigger. Your yard though is perfect for that 75mm size.
Is the video skipping/stuttering the goggle's DVR, too?
My favorite whoop at the moment.
No, the dvr/goggles only has this occasionally horizontal line that works its way from the bottom to the top, then its gone for awhile.
Really good rewiev also for a rooky like me...question : can i fly air65/75 with dji google? A lot of sruff ti learn in this drone world
Unfortunately no. DJI isn't compatible with analog. These whoops are generally analog. The old DJI V1 and V2 goggles we can add an analog module and plug that into the dji goggles to make it compatible.
Awesome flight and review Nick! You're flying pretty dam fast with this 75mm inside the house, wow! Do these motors use ball bearings?
lol thanks, its fun to wizz around. No the motors are bushings. I think newbeedrone might be one of the few companies offering bearings in whoop motors.
This is the one I've been wanting to see
Can you include stick osd in your flight footage? 😅
For flying outdoors, do you think that the Air75 or Air65 is better?
Pretty sure my thoughts are in the video. 75 outside 65 inside for most
i really want to buy the air75 right now! i was wondering which headset you had and which controller also if possible, i dont know if you are using your daily fpv gear or if you have a different headset for this particular tiny
I use the gear in the background of the flight footage. I do this pretty consistently. Zorro radio, hdzero goggles.
Pulled the trigger on the crossfire version. Flys very very good. Mine however gets ridiculously hot! It cannot sit for anytime at all before core temp warning pops up. It gets so hot that the blob of hotglue i put on to hold the vtx antenna connection tightly just melted 1st flight.
Its normal for micro vtx/AIO to get hot, we don't want them to be powered up long before we start flying. I turn the core temp warning off.
your videos are great. I broke my 65 in the same places lol
Is that an uncovered pool you're nearly crashing into a bunch of times with those dives!?!
nah its covered
@@NickBurnsFPV Oh good, it was freaking me out every time it fell near it.
Flew this for about seven minutes and noticed that my signal was completely going out and the drone was only 20 feet away 30 feet away. So when it landed, the entire antenna was ripped off and the little button that it snapped onto you that was ripped off the board as well so that’s cool so now I get to wait another three weeks for a beta FPV to a new controller, which is also interesting. I hope everything clips on and off I’m not trying to do little micro Soldering. Lol. I love the little thing though it zips around super lightweight and it goes pretty far for 400mw vtx
The motors are solder on. Was the antenna glued on?
Do you think they will make a version with their 5 in 1? That's the one I'd buy in a second.
I don't have any information that they will or won't. sorry
Nick what is your preferred battery connector for your 1S and 2S? I have Fatshark HOS
BT2.0, its compatible with a30 and of course bt2.0. Not sure how the fatsharks come to play here. Maybe you had a second question about the goggles.
The camera plug is the same size as the Newbeedrone one, but the wire order is not the same. So not a direct swap.
hi Nick that's amazing how you can fly that fast! i bought 2 air65 but im waiting for the charger yet to come! i have one question that i always want to ask but there is no one to answer.. its the 4 asterisk star like appear in your google.. what is it mean? appeared in your goggles after 6:15
Thank you. I am not sure myself what that is an indicator of. Its one of the betaflight warnings, but not sure which it might be, I need to review the warnings and see what it might be.
@@NickBurnsFPVthanks Nick!! ❤❤❤
So, fc wise, between betafpv meteor75 pro and the new air75, which of the two would last longer? I heard the new air75 fc has got more uart ur something like that? So besically what changes is the built of the drone and weight or also the new fc is better or more durable?
I am only a sample of one, well I have two air65s and only one meteor75, which I might still have. Hard to say about durability as they both of the air65s I have are still running and I haven't flown the meteor75 in awhile.
Debating between a 75 and 85. Flying 90% outside. Would this be a fit for me?
85 would be best suited outdoors, unless outdoor is like a play ground and you want to run through the small gaps those have. 85 is going to be much much more difficult indoors than a 75mm
I preordered this guy last week. Was really torn between the 65 and 75, since I want to fly in the house in the MN winter, but also outside and it's always quite windy. I went with the 75.
I wonder if there's a little whoop that is especially quiet for indoors. Open to suggestions from anyone.
My Blade Torrent 110 from 2017 gave up its smoke this summer, and my Blade Inductrix FPV + died last winter, so I need something else.
Lighter quads tend to be a tiny bit quieter, and those that run HQ props also tend to be slightly less noisy.
Do you think this has enough power to add Walksnail 1S to it? I am thinking of swapping the frame and motors from my Meteor75 Pro HD with the Air75 frame and motors, total weight about 30g (down from 37g).
Not if you want to fly fast or aggressively...for more than 2 minutes.
I hope BetaFPV will make a air 75 pro with the new 5 in 1. aio 😎
I asked and betafpv said no. Maybe they first want to get soll old Stock
@@chrisbee5481Okay😢 Thanks for that info✌🏼🔥
how does bi-blade it feel in the corners? grippy on rail or it feel like sliding?
biblades are pretty much always sliders compared to triblades. We have to compensate with more throttle and roll
Amazing
Can’t wait for mine, it’s been almost a month waiting.
I would hope it arrives soon
that canopy apparently puts pressure on the u.fl connector and with enough crashes it will shear off.
They changed the canopy all this and the 65 to alleviate that issue.
@@NickBurnsFPV oh excellent
Tempted, but Beta FPV boards have failed me at a rate much higher than any other board. I look forward to seeing how they hold up after more flying.
Happymodel failed more on me
I’m with both of you. Beta takes the crown on failures over the last years. Their 1s was burning itself out. Before that the leader was clearly HM, with crappy escs and failing Vreg :)
Great Review! No Stickers? Cheers, till the next one!
Thank you
Who makes the glowing cube gate?
Webleedfpv.com is where mine came from.
I fly the same, sometimes I wish i could freestyle like Heads over at Infinity loops or think, dam better practise some ladders to fly like TDog. Then I end up just flying around doing what I want having a blast 😅
yea, flight is for fun first, we can certainly challenge ourselves from time to time for a bit of a change.
Can you lower the angle of the lens in the Air75? just ordered it and was wondering that, since I've done it before with the Meteor65 pro
Its limited, but it does have four camera angles available in the back of the canopy with the screw mount.
That's a nice piece of kit. I'm gonna hold off a bit for a HDZero eco version or something.. I can't outright justify another analog whoop when I have a few already, hehe.
HDzero will have a 65mm whoop coming soon, the AIO has HDzero built into the AIO. Not sure when its launching, I have had one for over a month.
@@NickBurnsFPV That is so exciting to hear. I can't wait~
Whoa for real? I did not hear that they were going to build an AIO with built-in hd0. Be the first of its kind?@@NickBurnsFPV
@@Latchfpv I wish I new a launch date or price but at this point I don't believe those have been determined.
@@andrewy3711 yep, I just don't know much more than what I have in hand. Flies really nicely and for an hdzero whoop we can't do any better for weight than a true hdzero AIO
I see the PCB reflection also from the Meteor65 (same camera if I'm not wrong)
yea, I think all the c03 and maybe the c02 are impacted...well those without the tape on them now.
Damn dude, how do you fly so fast inside!?!
It wasn't always that way. Progression overtime.
How do you turn on the R:8:400 thingy on the top right? I can't find this in osd setup
vtx on the osd tab of betaflight
What do you recommend I fly outside and inside freestyle so Air 65 or Air 75 and with Air 65 Freestyle or Racing?
I suspect if you havent been flying inside the air65 will be a better fit.
@@NickBurnsFPVAlso Air 65 Vetter dir inside and outside?
Putting an Open Racer together with the DJI O3 Air Unit so I can start flying with a local MultiGP chapter.
Racing DJI O3 with a whoop?
@NickBurnsFPV LOL not sure how that happened, I was commenting on another video and it looks like it posted here. Love the video though thanks for sharing. :-)
Let's go Mets
El air 75 viene en camino, buena revisión trabajaré en la melodía,me gustó el 65 pero prefiero el 75 es mas versátil
❤
Motors are the weak point of betafpv, the bell falls apart very quickly and they continue to install them. Personally, I need to install smaller propellers and higher KV, since the impact from the protection falls on the shaft. And they do not want to do anything about it.
what the weight difference for the elrs and tbs version ?
sorry I wouldn't know. I only have the elrs vs. The TBS version will surely be heavier as TBS 900mhz antenna/wire
Do they make any of these whoops without these crappy antennas? I have never successfully replaced a broken one.
Not really, they are pretty standard in whoops and micros. I suspect when you say broken, you referencing the ufl connection on the board rather than replacing a broken antenna, replacing the antenna should be direct swap.
@@NickBurnsFPV Thx for the reply! So it's been a few years since I have flown whoops because I couldn't stop breaking them. Are you saying that we don't have to solder dipole to AIO anymore?
@@Roundawg yes, I don't recall when, but sometime back the micro ufl connection took over for the vtx antenna mount. from time to time we do find where the rx receiver is a plain/naked wire soldered to the signal pad on the AIO
@@NickBurnsFPV good to know! Thank you so much for the info. Thanks for all the informative and cool vids. I
Any idea if the metor75 frame will work?
will work? As in mount into another 75mm frame? yes 65mm or 75mm frames mount most AIOs. the only exception being the "pro" frames that maintain 65mm or 75mm but use 35mm or 45mm props.
@@NickBurnsFPV Yeah, cant seem to find any frame replacements for the air75
@@RenzFPV Sorry, what do you mean? in stock at FPV shops? The mobula7, happymodel v4, meteor75, fractal75, newbeedrone cockroach 75 frames will all work.
Tldw, is it better than Mobula 7 1S?
In my opinion it is
Im COMPLETELY new to drones and would love to start off with the air 75. Is there anyone who would be kind enough to explain exactly everything i need to buy or what videos to watch that will help get me flying?
The basics: You will need goggles with the same video system as the quad, we now have 4 different non compatible videos systems, DJI, Walksnail, HDZero and analog. Also need a radio, charger and likely a computer. Most get started with a ready to fly kit, which includes everything one would need to get started in FPV.
Thats too fast for my eyes
My air75 vtx has lots of sync issues. :-/ probably going to be putting a hdzero on it. Doubling the cost of the craft.
sync with a rapidfire module? Module firmware updated? Syncing issue are usually an issue with the camera.
@@NickBurnsFPV akkvrx module. I haven't looked into firmware updates for it. Latest HD zero goggle firmware. Same setup working with stock mob6 2024 analog, and betafpv M03 vtx.. just doesn't like the air75 about 30% of the time. Tx power doesn't seem to matter.. tx antenna doesn't seem to matter.
I don't have another analog vrx to try and validate it's solely the air75 and not something else. Thinking of getting the HD zero monitor..but hard to justify.
Anyways thanks for your vids. Can't wait for the aio embargo to lift.
@@wva5089 Thanks for the details. My understanding is this is most often an issue with the camera. Even the same camera will have the rolling black lines (sync) on one quad but not on a different quad with the same camera. It has something with the manufacturing and the "sync pulse" of the camera.
Yo i was wondering if you can use the 6 Ports 1S Battery Charger from betafpv to charge the LAVA 1S 450mAh 75C Battery? Please help!!!
the size of battery doesn't matter its the connection. All betafpv batteries come with the battery connection they designed the BT2.0, which the vifly 6 port charger does have bt2.0 connections. Short answer: Yes
@@NickBurnsFPV thank you very much. U have helped me so much!
I need it ,
Hey do you know if the 450mah battery's fit in the mob6.2024 ?
No it doesn't. 450mah batteries are much bigger and I don't believe any 65mm frames will hold a 450mah or bigger. the biggest they will hold is a 380.
Thx. Are the 550 lava fit to in the air75? Looks like 450 is hhe biggest that fit right?
@@Levytan1 I don't have lava 550, but other 550 do fit.
What is ur Beta Flight Rate ? 😅
my rates video is linked in the video description
I just can’t connect with my TBS crossfire. Waited 3weeks for it and can’t get it Up 😅. Help!!
Did it come with a crossfire reciever?
@@NickBurnsFPV Hi Nick thx for responding, yeah came with crossfire rx. My trouble is a solid red light on receiver whenever going through binding process. IDK can you help/what ya think?
@@melvinstewart3718 Unfortunately its been years since I have used crossfire, my help maybe lacking. Googling around it might be to large a difference in firmware or the rx is stuck in bootloader mode.
Hold down the bind button while powering up the receiver.
Release the button after the LED starts flashing quickly.
Press and hold the button again.
When the LED starts flashing in a double pattern, release the button.
Wait for the update to finish. The receiver will flash slowly when it's done, and then be ready to bind.
Bardwell also has a video on this issue that might help th-cam.com/video/NyFFN3WXSok/w-d-xo.html
I love my Air75, except for one issue with the ELRS range. I'm lucky if I get 30 feet away indoors before the signal and link quality drops right off. I usually fly with 25mW output, but even bumping it up to 500mW doesnt seem to make more than a few feet of difference. I reduced the packet rate from 500 to 150Hz whuch helped slightly, but its still pretty bad. My Mob6 2024 in comparison can fly much further indoors on 25mW without getting a failsafe.
Looking at Air75 flight videos on YT, it seems like some have a great signal and others are comparable to mine both indoors and outside. I'm guessing there's maybe some quality issues affecting some of these flat antenna receivers.
There could be an issue with the Rx, or betafpv is using the old v1 of this Rx. The v1 was known to not work very well.
@@NickBurnsFPVthanks Nick! I'll reach out to BeraFPV and see what they say.
Go Mets
lol. first to recognize the shirt!! But I grew up a Braves fan. Only team we could get for the longest time.
@@NickBurnsFPV Grew up in the Bronx but for some reason always like the Mets.
+1👍fly like you like 🚀
Jeg vil købe en af dine minidroner hvor du flyver hjemme i huset Stony fra Danmark her i Danmark er de helt vilde med dig du skal vide du er helt vild populær her i Danmark Copenhagen med venlig hilsen Stie basically FPV. Kan jeg bruge mine Dio coggels 2 til fine mini vaser droner på 1718 gram
First 😅