Pipe Bender Machine,Using Engine Flywheel
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- I make a pipe bender machine using a engine flywheel...I make a pipe bender machine, because sometimes in my work shop,I need bend some pipe..and there is a time when I bend a pipe,, without using a bender,the result not good, so that why, I need to make a manual pipe bender using the flywheel,then after I done the bender and I test it,so the result is good..thank you for watching..,
Really awesome idea but you got to 98% then skimped on the bracing, but simple fix an you have a tool lots of us could do with but are too lazy to build.
Keep it up :)
Можно немного замечаний?
9:09 дружище, ну сделай упор для опорного ролика! Косынка решит проблему.
Где ты набрал столько оливковой краски? 😂
У тебя есть токарный станок, пневматический гайковерт, но всё равно в кадре разводной ключ. Что намекает на любительство)
Но как идея весьма годно!
Needs more bracing it's flexing when you use it ,but nice concept.
Yep, that's all it needs now, two brackets welded and it's done.
couple of gussets in the right place and it will work great
Mantap
Good idea buut sloppy performed. And never ever weld a bearing.
Some like to criticize.But not me nice job and she's got weight to it.😂
You will need bending machine to make those bending sabots before you have a bending machine 😃 But seriously, nice project. hats off!
Mantap sekali
Hi ftroend
Hi Sir
NEVER NEVER NEVER….WEAR GLOVES WHILE USING A MACHINE..WHETHER IT BE A LATHE, DRILL PRESS OR BANDSAW…if that spinning chuck catches even a thread of that glove…MAYBE , JUST MAYBE, YOU MIGHT GET LUCKY AND ONLY LOSE ONE FINGER…
Welp.. thank goodness this is a flywheel and a ratchet😂 if you're gonna psa then don't leave out -don't wear long sleeve shirts or jewelry. -keep long hair up in a ponytail under a hat or cap. I've been a fitter/welder, machinist, auto fabricator/restorer and engineer on top of it all. I had a sharp metal plate I was drilling a hole in and had relatively thin nitrile dipped work gloves on to keep from getting cut. Was rushing and didn't want to set up a clamp. The MATERIAL caught the bit on a large drill press, jagged material snagged my glove, and it ripped it straight off my hand in a split second in a long torn piece. Been using the machines for years and it was just that 1 time doing something I've done a hundred thousand times properly- the wrong way to almost get got. Hell even a nice fairly powerful hand drill caught a 1" bit, kicked the drill and broke my thumb, and I have giant rock hard hams for hands, just callous and muscles. Don't mess around with machines mmmkay? Injuries suck
Я открою секрет.
Это TH-cam. Здесь критики в комментариях обсудят твою обувь, крики петухов в звуковой дорожке или как я, разводной ключ.
Я думаю перчатки одеты для того, чтобы ворчуны не принялись обсуждать маникюр и сбитые руки работяги.
Wearing gloves while driving large screws in wood with a drill can also result in a broken finger……i know first hand…actually the left hand
Must have been a special sale of surplus green paint a few weeks beforehand. 😅😅
Please show more on your hydraulic bench vise👍
haha, that arm holding the small die about to give up any moment now!
впервые вижу чтобы подобное крутили динамометрическим ключом..
Very nice work
Nice, just needs 1 more support brace and it should never break!
Отлично,Молодец!
Your work is always something I love. keep posting
Thank you,
Very nice 👍👍👍👍👍
Mantap sekali
Жесткость конечно потрясающая...😂😂😂
Very nice indeed.
Перфект
It’s a great idea for a hand made bender..
I would’ve gone a couple of steps further … found the matching starter to that flywheel, mount the starter under table, hooked it to up twelve volts, activate the starter with a foot pedal, hair trigger momentary switch.
رائع
Cool
Buena idea magnifica👍👋