Support us: th-cam.com/users/BEEDOUBLEUMedia Abonniert gerne auch unseren zweiten Kanal rund um Reisen und mehr - wir freuen uns sehr über jede Unterstützung! Ein dickes Dankeschön von uns ✌️
Another Mad Scientist....I wish I could do something as creative and engineered so well . Way out of my league . Nice, the talents of some of you creators is impressive.
Qual o nome dessa peça cheio de dentes q vc usou para fazer a redução, tem como especificar pra gente por favor, doque se trata essa peça como e onde encontrar
Cheap....provided you gots ($$$$) a lathe, welder, plasma torch, and know how to used them........ Yeah...not cheap... but still pretty cool project !!!
I agree. I bought a 16 ton manual hydraulic pipe bender from Harbor freight for about $175 . 1 INCH ROUND STOCK NO PROBLEM. I wish it had a power hydraulic motor. Lots of hand pumping involved.
you need a bigger bend radius or a mandrel setup for tubes with thinner walls but it's possible we will modified this bending machine with a mandrel setup soon.
This is a great build, I would like to do it myself. Can you tell me what the measurements are for the bolt pattern on the plate that goes onto the fly wheel?
here some pictures of the bolt pattern i hope it helps drive.google.com/file/d/1cm5Da1OkxjgWigFGucSWgKODKufJ_n7O/view?usp=sharing drive.google.com/file/d/1clsdcupJ51n5b1l2jauU0EZPNOzN-DXj/view?usp=sharing drive.google.com/file/d/1clZ-v6AQ0-dfs2W0Lf1_ywx1Lg09eFzI/view?usp=sharing Boltsize is M8 and M12
Danke für das positive Feedback! Da ich die Maschinen alle besitze hab ich Sie natürlich auch eingesetzt. Aber einige Sachen kann man auch durchaus mit weniger Equipment herstellen. Runde Scheiben gibt es auch zu kaufen und ausgebrannte Teile muss man auch nicht unbedingt auf der Drehmaschine runddrehen das ginge auch mit nem Bandschleifer....
ok now we just gotta build a lathe and mill. but usually its coming other way - firstly one gets wrenches, then a grinder, then a welder, compressor, other shit, i mean sheet bender, tube bender, finally he gets lathe and mill, turns them into cnc, becomes guru and dies of old age
How much would you charge to make me one of these.. I don't have a Lathe or the skill to do it myself.. i make Dodgers and Biminis for boats i have to have the frams bent and I make the canvas covers.
Support us:
th-cam.com/users/BEEDOUBLEUMedia
Abonniert gerne auch unseren zweiten Kanal rund um Reisen und mehr - wir freuen uns sehr über jede Unterstützung!
Ein dickes Dankeschön von uns ✌️
Another reason why I need a lathe and a mill. Awesome job!!
thank you👍
Did not even know gear type tubing benders were a thing until now, makes total sense!
Thank you for your comment.
Another Mad Scientist....I wish I could do something as creative and engineered so well . Way out of my league . Nice, the talents of some of you creators is impressive.
Please explain your opinion in more detail.
Nice bender..
Nice idea to make a very useful bender from scrap materials.
I like the concept.
Thank you for your comment :-)
Qual o nome dessa peça cheio de dentes q vc usou para fazer a redução, tem como especificar pra gente por favor, doque se trata essa peça como e onde encontrar
Cheap....provided you gots ($$$$) a lathe, welder, plasma torch, and know how to used them........
Yeah...not cheap... but still pretty cool project !!!
I agree. I bought a 16 ton manual hydraulic pipe bender from Harbor freight for about $175 . 1 INCH ROUND STOCK NO PROBLEM. I wish it had a power hydraulic motor. Lots of hand pumping involved.
Thank you for your comment :-)
Amazing work sir.... Can you please share the teeth of both gears and the size too...
We don't have the exact measures - used a starter and a flywheel from scrap therefor - the gear ratio is approx. 1/10
@@motorschuppen okay but can you tell teeth count of both gear please.
that took a lot of time and work...ill just buy a die set...saves me time
Thank you for your comment :-)
Nice bender. We shared this video on our homemade tools forum this week :)
Thank you for comment and sharing our video :-)
As soon as I saw the lathe I was 🤦♀️
I really wish I had one.
Nice video though 👍
You lost me at the big-assed lathe.
Thank you for your comment :-)
Nice build...
Thank you for comment!
Well done, superb
Thank you for comment.
Very nice 👍
Thank you for comment.
That’s a great build, very inspiring, thanks for sharing 👍👍👍
thank you for comment
Exactly what I was looking for! Are you building Crashbars next?
thats one of the many projekts i will do with this 👍
@@motorschuppen I am desperately looking for this type of build thanks!
Geiler Übergang am Anfang mim Schnipsen 👍🏼
👍😊👍
well done
Danke für dein Feedback!
Quel diamètre maximum peut on cintrer ?
avec vous les plans et dimension de votre cintreuse , merci
The max. bend radius is 140 mm and the max. tube diameter is 35 - 40mm depending on material and wall thickness
Can it ll be usable for steel tubes as well ?
you need a bigger bend radius or a mandrel setup for tubes with thinner walls but it's possible
we will modified this bending machine with a mandrel setup soon.
Danke für die Information! Können Sie mir die Anzahl der Zähne an beiden Zahnrädern geben?
Leider kommen wir erst jetzt dazu, den Kommentar zu beantworten.
Konnte die Frage zwischenzeitlich geklärt werden?
Hi sir I need is machine how much is one I am from Zambia are you in South Africa
Thank you for comment.
The machine is not for sale.
Amazinggggg... Sir. How many Gear ratio between small gear and big gear Sir?
its round about 1/10
This is a great build, I would like to do it myself. Can you tell me what the measurements are for the bolt pattern on the plate that goes onto the fly wheel?
here some pictures of the bolt pattern i hope it helps
drive.google.com/file/d/1cm5Da1OkxjgWigFGucSWgKODKufJ_n7O/view?usp=sharing
drive.google.com/file/d/1clsdcupJ51n5b1l2jauU0EZPNOzN-DXj/view?usp=sharing
drive.google.com/file/d/1clZ-v6AQ0-dfs2W0Lf1_ywx1Lg09eFzI/view?usp=sharing
Boltsize is M8 and M12
@@motorschuppen Thank you. so the M8 holes are for bolting down the die and the M12 holes are for the various stopper points correct?
the M8 holes are for the smalest die i used at bigger dies i used the M12 holes too.
Muy Bien. Felizidades!!!
thank you for comment.
Nice bend man, great job.
thank you for comment
Gute Idee und toll umgesetzt. Doch zum nachbauen bräuchte ich nen neuen Maschinenpark....😉
Danke für das positive Feedback!
Da ich die Maschinen alle besitze hab ich Sie natürlich auch eingesetzt. Aber einige Sachen kann man auch durchaus mit weniger Equipment herstellen.
Runde Scheiben gibt es auch zu kaufen und ausgebrannte Teile muss man auch nicht unbedingt auf der Drehmaschine runddrehen das ginge auch mit nem Bandschleifer....
Echt nen richtig cooles Video - immer weiter so :)
Vielen Dank für das Feedback!
Gruß aus dem #motorschuppen
Kersten
Show parabéns 👏 Álvaro/Regina
Thank you for comment.
Muy bueno. Tendrías plano para poder compartir o link de dónde descargar? Muchas gracias
Only german or english langurage supported.
Acetylene torch and proper application of heat.
Thank you for your comment :-)
Geil 😃👍
hast du deinen China-bieger eigentlich noch?
@@motorschuppen ja😅
wie ist denn da der biegeradius bei der 25mm matritze?
@@motorschuppen uff... da muss ich nochmal schauen
Muy bueno. Tendrías plano para poder compartir o lugar de dónde bajar.? Muchas gracias
ok now we just gotta build a lathe and mill. but usually its coming other way - firstly one gets wrenches, then a grinder, then a welder, compressor, other shit, i mean sheet bender, tube bender, finally he gets lathe and mill, turns them into cnc, becomes guru and dies of old age
Thank you for your comment :-)
🏅🏅🏆
Vielen Dank für dein Feedback!
#motorschuppen
#beedoubleumedia
I love when people use a $10,000 tool, to save $100 on a tool that costs $500 😂
In germany you can't buy cheap benders... that's the why.😉
Do that a hundred times and the $10,000 tool pays for itself.
Also good benders aren't cheap
DIY., Really? Who has a lathe like that at home? Well.... not me.
Came here to say the same thing!
you dont need a lathe to build this you can use a grinder as well
i have that lathe at home so i use it
He did it by himself. Therefore it was diy.
Not all diy projects is for amateurs that doesn't even have a tool box.
💯👍
Thank you for your comment :-)
Part 2 make a tube bender die from scratch is available now: th-cam.com/video/2k_qw0l3l20/w-d-xo.html
It's not cheap if you have no lathe.
Thank you for your comment :-)
Build it cheap? The damned plate alone has got to cost several hundred dollars!!!
Thank you for your comment.
We got all parts from scrap and the yard.
Overkill
Thank you for your comment :-)
So this man owns a lathe but has to make a tubing Bender out of scrap 🤔. I'm going to throw a 🏷️ yellow flag on this one.
Thank you for your comment :-)
The lathe is a old used one - cheap to get here sometimes.
DIY? Yeah right, DIY if you got an expensive lathe. Make a DIY video for the 95% that dont have a lathe.
He did it by himself. Therefore it was diy.
Not all diy projects is for amateurs that doesn't even have a tool box.
@@Bosbulls You got it hotrod.
Thank you for your comment :-)
How much would you charge to make me one of these.. I don't have a Lathe or the skill to do it myself.. i make Dodgers and Biminis for boats i have to have the frams bent and I make the canvas covers.
Thank you for your comment :-)
We don't offer tools or the work for.
You didn't answer my question.. I'll pay you to make me one of these.
I did ... or i tried to do ... we don't offer to do these tools or parts of these.