Been considering buying a GTO project car here in New Zealand. Definitely gonna go for it now. Beyond happy that this TH-cam channel exists thank you so much Joe 👏
one thing that is useful to know , some after market carrier bearings have ben pressed in the wrong direction , my febest ones had to be pushed out and flip the bearing and pressed back in , i just used standard puller that i used for removing the yokes to push bearing out , problem fixed
Thank you from Lewiston Idaho USA I have been sending you a message about parts for sale if you have any I appreciate it..thanks for your kind and help..
I just want to reinstall the propeller shaft but there are 2 long carrier bearings and 2 short carier rubber carier bearings. Which one goes to front which one to rear? I dont get it they are different for sure but have same parts number it makes no sense at all. Any help any idea? 3000GT VR4 6 Speed 1997
awesome. if you please can do a video on the Automatic transmission replacing the selenoids, and how to rebuiilt an automatic transmission. i will be forever thank full. Galo from Clarksville TN. 1997 3000gt SL. thanks
Hey Joe you have any videos about the ac system? I can jump the ac clutch and it runs. But the ac condenser fan don't run and when I jump the pressure switch the compressor won't engage. But when everything has been bypassed I get some hot some cold air. Any ideas? ( ac didn't work when I bought it. Put a new compressor on it tried to fill it with refrigerate, had to jump the compressor clutch. I'm not leaking air) any tips would be appreciated
Joe, We envy your Hydraulic Scissor Lift. We have 2 VR-4 / Stealth RT/TT projects going on and are in dire need of something like that in our shop. Would you be willing to share the brand / type / specifications of the lift?
Hello joe i was wondering have you ever worked on the air intake runner motor my 1994 is lagging the gear is stripped out and have new gear but dont want to mess it up so what is the right way to set that motor on intake runner my name is charle from usa
Theoretically if I were to put vr4 drive shaft in a 91 dodge stealth es fwd ,with rear axels,lsd, etc the whole conversion set up. Would it work as a awd or rwd
Hi Joe, thank you for the wonderful video. Quick question, you mentioned about making sure to source the correct prop shaft. I have a 91 GTO AWD Auto Trans (Jap), and was wondering if there is a difference in the part numbers for this prop shaft compared to the ones on the 91 3000GT VR4/Stealth TT with 5 speed gearbox? Many thanks from Australia!
So helpful to have this video
Been considering buying a GTO project car here in New Zealand. Definitely gonna go for it now. Beyond happy that this TH-cam channel exists thank you so much Joe 👏
one thing that is useful to know , some after market carrier bearings have ben pressed in the wrong direction , my febest ones had to be pushed out and flip the bearing and pressed back in , i just used standard puller that i used for removing the yokes to push bearing out , problem fixed
Joe you are a mind reader. Today I just started making a list of parts for a all wheel drive conversion. Great video.
Thank you from Lewiston Idaho USA I have been sending you a message about parts for sale if you have any I appreciate it..thanks for your kind and help..
Ayo pass that list
I'm doing the same thing too on my 91 FWD Stealth.
Can you do please do the how to replace the gear box under engine. Thanks for your great education on the 3000GT.
Great seeing all the 3s content you provide! Will be very helpful to folks.
I just want to reinstall the propeller shaft but there are 2 long carrier bearings and 2 short carier rubber carier bearings. Which one goes to front which one to rear? I dont get it they are different for sure but have same parts number it makes no sense at all. Any help any idea? 3000GT VR4 6 Speed 1997
awesome. if you please can do a video on the Automatic transmission replacing the selenoids, and how to rebuiilt an automatic transmission. i will be forever thank full. Galo from Clarksville TN. 1997 3000gt SL. thanks
Hi I want to know if you can show how to remove the u joints from the driveshaft thank you
Hey Joe you have any videos about the ac system? I can jump the ac clutch and it runs. But the ac condenser fan don't run and when I jump the pressure switch the compressor won't engage. But when everything has been bypassed I get some hot some cold air. Any ideas? ( ac didn't work when I bought it. Put a new compressor on it tried to fill it with refrigerate, had to jump the compressor clutch. I'm not leaking air) any tips would be appreciated
This is not a area that I cover. Sorry.
@@3000GTGTORestoration that's ok thanks for the reply
Joe, We envy your Hydraulic Scissor Lift. We have 2 VR-4 / Stealth RT/TT projects going on and are in dire need of something like that in our shop. Would you be willing to share the brand / type / specifications of the lift?
Hello joe i was wondering have you ever worked on the air intake runner motor my 1994 is lagging the gear is stripped out and have new gear but dont want to mess it up so what is the right way to set that motor on intake runner my name is charle from usa
Would love to see a video on the sway bar removel / anti roll bar front and rear
Theoretically if I were to put vr4 drive shaft in a 91 dodge stealth es fwd ,with rear axels,lsd, etc the whole conversion set up.
Would it work as a awd or rwd
Hi Joe, thank you for the wonderful video. Quick question, you mentioned about making sure to source the correct prop shaft. I have a 91 GTO AWD Auto Trans (Jap), and was wondering if there is a difference in the part numbers for this prop shaft compared to the ones on the 91 3000GT VR4/Stealth TT with 5 speed gearbox? Many thanks from Australia!
I do not have this information. You could contact mitsubishi dealer or try one of the online part sourcing companies.