How to HPA Shotgun everything you need to know /part1/ Airsoft Gear
ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2025
- Hello Guys
Today I would like to show you what you need If you want to start playing with an HPA Shotgun.
If you have any further questions just hit me up in the comments or text me a PM on Instagram :operatorkrampus
There will also will be a second part about the different pressures and BB weights you can use to choose wich spread you need at different distances.
Discord: / discord
#airsoft #hobby #howto #hpa #airsoftvideo
If you guys have any further questions, just hit me up in the comments and I will answer you as good as I can 💪🏻
Thank you for sharing your loadout. I didn't think about using a cummerbund to connect the gear together. I used an old cummerbund from a plate carrier and a MK3 placard to get a similar setup.
Sounds good
I just went to the cummerbund to use the integrated pouches on the sides. That I don’t waste that space anymore and it’s easier for comms.
Very detailed video, thanks, I plan on getting a GE Greengas M8878 soon and converting it to HPA later, it is amazing to watch players using it instead of usual m4/ak/g36 line
Thank you mate💪🏻
I wish you allot of fun!
Yea many players didn’t expect the fun that a shotgun brings and it’s a little challenge too.
All in all the most fun on games I had was with a shotgun.
Great Video 🔥💣
Thank you 💪🏻
I have a brand new TM Breacher. I set my psi to 100 and I’m using .28s. After about 20 feet the BBs shoot straight up. Like they’re being over hopped to the max. I even tried .30s. What’s the deal? Normal?
That’s strange
Are all three are shooting straight up or just one?
@ The top barrel over hops every shot. One of the side barrels over hops 50% of the time. I just cleaned out the barrels and they were filthy from the factory. Idk if that was the problem though.
@ that th stop one shoots up is quiet normal regarding of the psi and weight you're using.
But I never had that happened with a side barel... maybe there is something wrong assembled in factory or like some dirt or so causing too much pressure at the rubber, or something just isn't fitted properly. So maybe consider to disassemble the gun to check for problems.
@ I’m hoping all the grease I cleaned from inside the barrels/hop unit fixed the problem. If not than I’ll definitely figure out how to disassemble or take it to a pro shop.
@ Sounds good, but normally couses grease in the barrel or hop up to get less hop….
Which hpa adapter did you use, i need 1 with a valve!
Hi
It should be an epes one.
I have a video just about the shotgun and in its description is a list of every part I used if you have further questions.
Hello, can you link me that minimal stock? I need it! Thanks!
Should be in the Videos description
I cant find the shell holders u use do u have a link?
Sure
blackfolium.com/products/mag-pouch-12-gauge-x-6
Nice video 🤗 great from KGG Dutchies Mr hitman
Thank you Mate💪🏻
Where did you get the gas stock from?
I baught it at REP AIRSOFT.
All parts are listet in the description of my gameplay videos
How many shots does your shotgun get while using your "WIFI" HPA. So how many shots do you get with the line disconnected?
I would say 3 shots with max power and than heavily dropping. Around 7 shots in total.
Hi, also ich hab die Videos gefeiert wie du mit der shotti abgehst 😎. Ich hab aber mal eine frage zu deinen shells. Ich überlege mir die ksg von marui zu holen und habe gelesen die sollen mit dem cyma shells nicht so funktionieren. Welche nutzt du denn so?
Hi Vielen Dank erstmal 😉
Komme ich eigentlich im Video drauf zu sprechen 😉 also ich nutze die von Cyma und Tokio nur die 5 oder so die dabei waren.
Die Shells sind in der Funktion 1:1 nur markings sind unterschiedlich und Farbe. Beide Hülsen werden gleich gut aus der waffe ausgestoßen und beide Feeden gleich gut. Ich sehe da keinen unterschied. Ich weiß aber natürlich nicht was genau bei der KSG anders ist dass cyma jetzt auf einmal nicht mehr gut funktionieren sollen.
Mein Kollege und ich kommen zusammen auf 4 M870 Modelle von TM und keine davon hat Probleme mit den Cyma Hülsen.
Da sie auch deutlich günstiger sind würde ich dir auf jeden fall raten das ganze wenigstens mit einer Packung selbst zu testen.
Where is the gas stock from agaim
It’s the Golden Eagle one
@@krampusde9122 could u send the link because I can’t find it
@@Ozzy-Combat repairsoft.be/shop/golden-eagle-m870-m4-stock-tube/
@@Ozzy-Combat seems like its currently out of stock, but if you text him he maybe could do something for you.