@@ttlhuskereastcampus7461 it is a lot of tractor. It's got a few quirks that we are trying to work through in the end I think it will be a great tractor.
That chisel will be too much for the 930 in that compacted sod. Easy solution is to put the 2470 on it. That will make a nice match. It you weigh down the 9, you will break something. Pull smaller implements when using old tractors.
It's dry hook that case on it but don't go very fast you will pull that cult apart iv pull that kind of cult with a 4490 case just go slow it's dry hard
That 2470 looks like it’s in great shape. Love that tractor
@@ttlhuskereastcampus7461 it is a lot of tractor. It's got a few quirks that we are trying to work through in the end I think it will be a great tractor.
I did this with a 4020 and 14' chisel with spikes for shovels worked great
@@mikelembke5121 4020 are great tractors mine still is a hard worker even though it needs a fuel injector pump rebuild.
That to looks just like a seed discer without grain box a mini ap or coop
It's called a one-way
Most of them cultivator springs all fit cockshutt Oliver ccil coop ect all work
@@rodneybalog4605 thanks for your comment
Depending on your budget, go rent a large HP tractor with an OFF-SET DISC.
Get after that ground that you have because it is ready to be worked up !!
@@clutchman1066 not much of a budget that's the reason we're using old equipment.
Turn that pivot on for a day and then moldboard it and disc then soil finisher
@@paulsackett3485 the water in the canal has been turned off at this point in the season and the pivot has been winterized
After that sub soiler if you went cross way from that with spike cultivator then gowith that dis you'd have a nice job
@@rodneybalog4605 just going over it with a disc is in the future of that field
That chisel will be too much for the 930 in that compacted sod. Easy solution is to put the 2470 on it. That will make a nice match. It you weigh down the 9, you will break something. Pull smaller implements when using old tractors.
@@johnluimes8359 we found out that your advice is correct. I never would have guessed that the 9:30 wouldn't handle it but that's the case.
It's dry hook that case on it but don't go very fast you will pull that cult apart iv pull that kind of cult with a 4490 case just go slow it's dry hard
@@rodneybalog4605 slow is always better if you have the patience.