How to replace the front shock absorbers Tiguan mk1 ➿
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Needed parts:
- Multi-purpose grease
- Suspension strut support bearing : bit.ly/suspensionstrutsbole12...
- Shock absorber : bit.ly/frontshockabsorberJGM3...
- Penetrating oil : maclede12.co/Penetratingoilen
- Spring
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Front shock absorbers on a Volkswagen Tiguan mk1.
Discover the world of UseTool EN on
Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool ES to repair your Tiguan 1 : maclede12.co/toolboxCLASOS3050en 🏆🤖💣
- 18mm Offset wrench
- 16mm Offset wrench
- Big flat head screwdriver
- Socket wrench
- Sanding paper
- Wheel lug wrench
- Torque wrench : maclede12.co/torquewrenchCLAS... or maclede12.co/torquewrenchCLAS... or maclede12.co/torquewrenchCLAS...
- Small flat head screwdriver
- 13mm socket
- 21mm socket
- Hammer
- Wire brush
- Spring compressor : maclede12.co/springcompressor... : maclede12.co/springcompressor... or maclede12.co/springcompressor...
- Shock absorber head removal kit : maclede12.co/shockabsorberhea...
- Iron bar
- Crowbar
- Impact wrench
- 6mm Allen key
- Chisel
- Wiper arm Puller : maclede12.co/wiperarmpullerCL...
- M6 Triple square socket
- M14 Triple square socket
- Adhesive tape
- M24 Triple square socket
- 21mm Offset wrench
🔝💪Safely lift your Tiguan 1 with the hydraulic jack: maclede12.co/jackCLASOH5304en and axle stands: maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝
- Hydraulic jack
- Wooden peg
- Axle stand
🚗📢💡 RESOURCES 💡📢🚗
Usetool's warnings
- We advise never replacing just one shock absorber, to make sure you drive we the most balanced vehicle possible.
- Be careful during the spring compression stage, it may be risky and requires careful attention. Fix the tool in a vice, this will make it easier to use.
Usetool's infos
- During this operation, you will work on the steering system of your car.
- When you change the shock absorbers in your vehicle, you should carry out a tyre alignment.
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : • How to (PROPERLY) lift...
- [ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel : • ASTUCE : Pneu crevé ? ...
- How to replace the sway bar links Tiguan 1 🚗 : • How to replace the swa...
Space Race by tubebackr | / tubebackr
Music promoted by www.free-stock-music.com
Terms and conditions of the offer : www.mister-auto.co.uk/operati...
Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.
0:00 Intro
0:15 Remove the shock absorber
5:20 Set the new shock absorber up
7:31 Replace the shock absorber - ยานยนต์และพาหนะ
BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
Is it important to re Aline front end after changing shocks
Really good video, you did miss the rotation of the top mount when refitting
Hello Friend, can I ask a quick question. I'm going to put B6 on my Tiguan. But do I need the rubber spring isolator on my front strut? Like on this link (at 16:43)
th-cam.com/video/i55h2CLW0ZU/w-d-xo.html
Отлично замечательно превосходно
Way more work than ends doing to remove the shock
Tre bon !
Merci beaucoup 😂
Torque specs?
Torques are newton-meters or foot-lbs?
After doing some research I believe they are using NM. Additionally I believe when they give a torque spec and a degree of rotation, I believe you are supposed to do both with the torque spec first and then the degree of rotation.
The commentary says: 25 mm triple square. The transcript says 24 mm and so does the tool listing. Which is it?
M24
Yeah since the lady said m25 I stripped my bolt....thanks it was a m24 12 pt
I never understood why in some VWs you gotta undo the axle bolts which are usually rusted and fused. I hate that design
What’s years is this for?
This worked for my 2013.
@@Mr.Wiedenbeck thank you!
I have a 2020. But he should’ve made that comment to help ppl figure it out.
@@mcmarine777 it works for the 2020 too. 99% the same layout
@3:05 she says 25mm Socket. is it 24 or 25?
It's 24mm for sure. Doing this job this week. I got Audi TT strut mounts with OEM bearings.
It is a 24. I checked on the socket it says 24. Good luck.@@R0bTheRobot
@humbertom1184 Did the job last weekend. Had To cut out 4 of the 6 top nuts. Had to leave some spring tension on the struts to undo the top nut as it was stripped. Impact was my friend there. Everything else was ok. Axles weren't that bad to remove. I also used a strut spreader tool aswell.
@@R0bTheRobot Did you mean the top bolts ?.
@@SpikesMavic top strut bolts yes
Shock nut 19mm not 21
I'm going to put B6 on my Tiguan. But do I need the rubber spring isolator on my front strut? Like on this link (at 16:43)
th-cam.com/video/i55h2CLW0ZU/w-d-xo.html