Hey folks, welcome back. Thanks for checking out my store. To all the new faces, here’s a showcase you might enjoy th-cam.com/video/FmUEbAppcjg/w-d-xo.html
Nice work! As a fellow designer and printer of bricks, I can suggest that the layer mis-alignment is most likely due to insufficient supports (always the case with my prints); Try using heavy supports connected where they're least likely to be seen, in combo with light supports. Also, I see you're already rotating the parts on the Y axis, but try additionally rotating the part 10° on the X. (Or vise-versa.) Good luck!
This video is literally perfect, I've been looking for a resource on doing this stuff in Rhino to get more familiar with the program. Thank you so much!
@@socalcrafter maybe try doing it so that the attachment can be rotated to move the sword to side/front/back so that it doesn't hinder the arm articulation
Is the minifigure model you use publicly available? And do you make your antistuds (for helmets) using booleandiff or do you use the value of the measurement?
That's really cool, you put so much effort into your content, probably more than some lego stop motion animators (which is rediculusly (sry i'm dyslexic) difficult to do) and btw I bought 2 of the frog mouth helmets from your store today :)
@@socalcrafter Np, and thanks for having resonable prices, I feel like a lot lego castle seller will charge littterally $40 for 3 plain black falcon figures. ( I did visit a site where a seller had those prices), It`s absurd, but once again thank you for creating great products! I may end up using them for Stop Motions, and I`ll give you credit for the design and will link your store and channel, when and I begin working on a lego castle animation. And I know there resin, so I`ll be sure to be careful ;)
Yep! For safety, a mask would be great. The cautions people give are warranted, and it can often times turn people away from the hobby. But, with a dedicated workstation, it’s not as daunting as one may describe it :)
Hey folks, welcome back. Thanks for checking out my store. To all the new faces, here’s a showcase you might enjoy th-cam.com/video/FmUEbAppcjg/w-d-xo.html
Not a lot of people actually show how they make them so thank you been following you for a while can’t wait to see more designs
Hey if I can be of any help to you guys, that’s absolutely great! It sure is more time consuming than a Timelapse may show… Thanks for watching!
If you make painted versions available in your store, that’ll be awesome! I just don’t have enough confidence in my ability to paint these pieces LOL
Definitely! Listings for painted versions will be come up slowly, but surely :)
Congrats on almost 500 subs my guy
It’s been a ride! Thanks my man
Great video production, and knowledge share with the content itself. One of the best vids I've ever seen about lego accessories and 3d printing.
Nice work! As a fellow designer and printer of bricks, I can suggest that the layer mis-alignment is most likely due to insufficient supports (always the case with my prints); Try using heavy supports connected where they're least likely to be seen, in combo with light supports. Also, I see you're already rotating the parts on the Y axis, but try additionally rotating the part 10° on the X. (Or vise-versa.) Good luck!
I appreciate you taking the time to help me out! Good luck with your endeavors too 👍
I am definitely gonna order some pieces from you. thanks for the tutorial as well, very cool.
I appreciate the support man! Glad this video helped out :)
Bro these are so good
I appreciate it my man!
This video is literally perfect, I've been looking for a resource on doing this stuff in Rhino to get more familiar with the program. Thank you so much!
Have you thought about making a belt piece with attachment for a sword like on the lego piece used in pirates of the carribean sets?
Yes I have! I do have one designed, but I felt it wasn’t unique enough to show/sell haha
@@socalcrafter I think that it doesn't have to be very unique because they can just be used with more interesting armor
@@socalcrafter maybe try doing it so that the attachment can be rotated to move the sword to side/front/back so that it doesn't hinder the arm articulation
Very interesting idea… might have to give that a shot! Thanks for the suggestion :)
I would like to see custom wolfpack renegades as well! Torso, armor, shield
I’ve done a video on them, you can watch it in my playlist! The techniques used to make those are basically the same as what’s shown in this video :)
@@socalcrafter yeah I found it later awesome!
Hi, i love your designs. Do you maybe have models for forestman hat and plume? thanks
What about the black knights?
One of my favorite factions for sure. They will be getting a video one of these days :)
I only ordered a few things sadly but can’t wait to build stuff with them
Yessir! Your order is being taken care of right now. Excited to see what you come up with!
@@socalcrafter thanks
Is the minifigure model you use publicly available? And do you make your antistuds (for helmets) using booleandiff or do you use the value of the measurement?
That's really cool, you put so much effort into your content, probably more than some lego stop motion animators (which is rediculusly (sry i'm dyslexic) difficult to do) and btw I bought 2 of the frog mouth helmets from your store today :)
Thanks for checking out my videos and my store 👍
@@socalcrafter Np, and thanks for having resonable prices, I feel like a lot lego castle seller will charge littterally $40 for 3 plain black falcon figures. ( I did visit a site where a seller had those prices), It`s absurd, but once again thank you for creating great products! I may end up using them for Stop Motions, and I`ll give you credit for the design and will link your store and channel, when and I begin working on a lego castle animation. And I know there resin, so I`ll be sure to be careful ;)
wish i could do that
With enough motivation my man, you can certainly do it too!
Very cool work & stuff, would be neat to see how you paint them too
Just placed an order
Thank you sir! Maybe I’ll work on another tutorial down the line :)
hey i might grab some pieces but do you ever plan to sell painted version in the future?
I think once the initial wave of sales die down, I can start offering very limited quantities of painted versions! Thanks for your interest :)
I noticed how you modified the ramp to the knights castle, as I have looks much better. 👍
Is resin toxic or do you wear a mask when printing? Just saw another video on the potential downsides to resin printing?
Yep! For safety, a mask would be great. The cautions people give are warranted, and it can often times turn people away from the hobby. But, with a dedicated workstation, it’s not as daunting as one may describe it :)
Are you shippong to Serbia, Europe?
Hey there, I am currently only shipping to the North Americas, but I am definitely planning to make it available over in Europe as well :)
@@socalcrafter sounds good man :)