How in the world did you double your power bolting the parts on the engine? WOW! I got 35 HP from my 30.5 cc engine from watching this video , thanks a lot
You probably dont give a shit but does someone know of a way to log back into an instagram account?? I was dumb forgot the login password. I would love any assistance you can give me.
What drive is your torque wrench. Is it 3/8 or 1/4. I just want to know because I want to get one that's suited for the baja engines. I've got a g290 zenoah. It's inch pounds too is that correct.
Hi love your vids bring the cam closer , I have a zenoha 24 in a large heli and learn from these vids , I also have a zenoha copy no branding on it but the letters QL on the block maby China don't know but would like to find out keep going good vids
So if u have extra motor parts laying around all ready it would be cheaper to just get a long block instead of a complete engine ..would the parts from a 2 bolt work on a 4 bolt long block? Flywheel , clutch , clutch housing etc
Diy type of guy That is correct and yes the parts from a 2 bolt will be compatible. If you have the parts to complete the long block it will save you $100-150 over buying a complete engine.
The torque specs you mention differ from my Zenoah manual. It says 7.8nm max (around 69 inch-pounds) for the clutch. Are the torque specs different for tuned motors?
Would I be able to use that on the stock 29cc losi 5t, or what can I do to get the most power out of the 29cc without buying a in motor. Any info i really appreciate. Thanks
Hi guys, I have a ported Roven 32cc, would the WT 990 carburettor be good for this? The car is a bespoke 1/4 scale altered drag car. Any help much appreciated. Steve.
thx for the vid...see they have come out with all kinds of new ones ..now my question is what does the clutch housing mount onto...the old ones were simple just use to have a spindle and it would bold onto the classic california go ped frame...anyway u could help me out.. i was thinking about buying a new motor for my go ped but cant figure out what the clutch assembly and the clutch housing mount onto....dont know what the assembly parts are called
If your goped has a clutch the engine will bolt to the clutch carrier/engine mount. Which model goped do you have? If you're unsure you can always email us a picture or two and we can verify.
Use the contact form on our website and when we will reply from an email you can send pictures to. I don't think youtube will let me post an email in the comments.
ya looked up your guy's website and hit contact us..but the site will not allow me to copy and paste images...nor will it allow me to add it as an attachment ...
Hi Sean, I have watched alot of your videos, I have just recently purchased a Roven 30.5 witch I am planing on using in a drag car, what carboretter would you suggest I use? I would really appreciate your help.
seems people get longblock and longrod mixed up.im sure you guys have gone over it but would be good to mention it in the next video.. I think the carb spring mod would be good for peopke to see. taz
The rings in two-strokes are guided by small pins - usually brass or steel - that go partly into the ring groves. They do not rotate in the grooves like in most four-stroke engines. If they did rotate, the ends would snag in the ports! Hence, they are pinned in the piston.
I just bought a motor for my go puad and i put the clutch houseing and also the spindle put when i turn on the motor the spindle don't spin help please.
Gday mate, I have a few questions regarding an engine. i am thinking about buying a 34cc engine off you guys but i am unsure of what the difference between a normal engine and a long block is? secondly, i do not have a torque wrench but would doing all of the bolts up nice and snug do the trick? cheers
+jack oliver They are both exactly the same but the long block is basically a stripped down version of a complete engine. You can save money going with a long block but you'll need to complete it with your stock engine.
A 5mm bolt probably wants a 4mm Allen key. I’m fond of the Bondhus brand, especially the ones which resemble screwdrivers. Have a 43cc (Zenoah) engine, which I plan to use in an emergency generator.
All of our long blocks are ported and will have more power than a stock engine. A long block basically is a cheaper alternative to buying a complete engine if you have a stock engine you can complete it with.
Sorry to bother anybody but I'm having trouble with my engine it's a cy 29cc where the clutch holder/plate goes on the crankshaft its supposed to be a friction fit with a retaining bolt in the centre but no matter how tight in make the bolt the crank just spinning in the clutch plate
You're buying one of their built longblocks and bolting on parts from your existing engine. So their built engine is double the power of your old engine.
Nobody ever even mentioned torque values before.Thank You
How in the world did you double your power bolting the parts on the engine?
WOW! I got 35 HP from my 30.5 cc engine from watching this video , thanks a lot
2+2=4 still right?
lol
@@serpuns7409 ...FAKE HP
Great work guys. Appreciate you taking the time to present these videos and everything else you do for the sport.
Thank you!
You probably dont give a shit but does someone know of a way to log back into an instagram account??
I was dumb forgot the login password. I would love any assistance you can give me.
@Travis Declan instablaster ;)
Nice vid buddy and thanks for the free lesson it's much appreciated and greetings from uk
Awesome video. Thanks for all the information. Torque specs etc. Great informative ideo.
Great video Hi what brand is torque wrench please cheers
Dan wussup. Will from east coast I see you guys still on top...keep on with the keep on
What drive is your torque wrench. Is it 3/8 or 1/4. I just want to know because I want to get one that's suited for the baja engines. I've got a g290 zenoah. It's inch pounds too is that correct.
great video very clear instructions. i only have 1 question why do you not use locktite?
You're welcome. If anyone has suggestions for another tech video please let us know.
Great video thanks I'm really keen on the 34cc signature series what exhaust would work best?
Easy to understand! Are the settings for a 49cc carb the same as what you showed for the hi and lo? Very helpful! Thanks!
Ok. I suggest a video with basic illustration on what motor CC is and if bigger is better.
Hi love your vids bring the cam closer , I have a zenoha 24 in a large heli and learn from these vids , I also have a zenoha copy no branding on it but the letters QL on the block maby China don't know but would like to find out keep going good vids
So if u have extra motor parts laying around all ready it would be cheaper to just get a long block instead of a complete engine ..would the parts from a 2 bolt work on a 4 bolt long block? Flywheel , clutch , clutch housing etc
Diy type of guy That is correct and yes the parts from a 2 bolt will be compatible. If you have the parts to complete the long block it will save you $100-150 over buying a complete engine.
hey dan kan you build a guid book on rebuilding an engine
The torque specs you mention differ from my Zenoah manual. It says 7.8nm max (around 69 inch-pounds) for the clutch. Are the torque specs different for tuned motors?
Great video steps are easy to follow well done!
What the minimum squish and maximum squish recommended on these engines ?
You Mentioned cy engines will the parts off an hy engine fit your motors
what kind of torque wrench is that been looking for one like that
Yeah I would like to know also .
What is the advantage of Long block compared to stock engine
Thank you
Would I be able to use that on the stock 29cc losi 5t, or what can I do to get the most power out of the 29cc without buying a in motor. Any info i really appreciate. Thanks
What Allen wrench r u using that is a 3way or sided wrench?
Wat size bolt holds the back plate on for the clutch
Do you sell any big bore heads or kits I can put on my Zenoah 29cc
Hey, that's my motor! Do I get a discount for a demo model?? :) Great job Dan!
planning on buying the 7.9hp engine hopefully within a week. would i have to brake in the engine?
Are these motors good for RC boats please comment back in let me know thank you very much Would love to know thank you
Hello, where could I get my hands of those torch wrenches? I looked in eBay but no luck, please let me know
Frank Pineda use a bike torque wrench
1/4 inch. eBay or AliExpress. $55 aus
Thanks,I Had The Carb And Volicty Stack Gaskets Switched 😕
Hi guys, I have a ported Roven 32cc, would the WT 990 carburettor be good for this? The car is a bespoke 1/4 scale altered drag car. Any help much appreciated.
Steve.
How do you feel about the RCMK engines ?
Thank u for bringin this to us much help 🤑👊
Very educational man thanks 🙏
That's amazing thanks for sharing!
thx for the vid...see they have come out with all kinds of new ones ..now my question is what does the clutch housing mount onto...the old ones were simple just use to have a spindle and it would bold onto the classic california go ped frame...anyway u could help me out.. i was thinking about buying a new motor for my go ped but cant figure out what the clutch assembly and the clutch housing mount onto....dont know what the assembly parts are called
If your goped has a clutch the engine will bolt to the clutch carrier/engine mount. Which model goped do you have? If you're unsure you can always email us a picture or two and we can verify.
ya for sure..do u guys have a gmail or some kind of via email..i have tried to send photos through message but it wont let me
Use the contact form on our website and when we will reply from an email you can send pictures to. I don't think youtube will let me post an email in the comments.
ya looked up your guy's website and hit contact us..but the site will not allow me to copy and paste images...nor will it allow me to add it as an attachment ...
Hi Sean, I have watched alot of your videos, I have just recently purchased a Roven 30.5 witch I am planing on using in a drag car, what carboretter would you suggest I use? I would really appreciate your help.
Walbro
seems people get longblock and longrod mixed up.im sure you guys have gone over it but would be good to mention it in the next video..
I think the carb spring mod would be good for peopke to see.
taz
Thanks for the HELP
Does the piston ring gap have a proper orientation in relation to the piston?
The rings in two-strokes are guided by small pins - usually brass or steel - that go partly into the ring groves. They do not rotate in the grooves like in most four-stroke engines.
If they did rotate, the ends would snag in the ports! Hence, they are pinned in the piston.
Whats the torque spek for the exaust.
I just bought a motor for my go puad and i put the clutch houseing and also the spindle put when i turn on the motor the spindle don't spin help please.
Are you running a clutch or direct drive?
hey i just wanred to know if the obr 48cc engine fit easily in my exeed 1/5 scale barca
+dana Hill Sorry but it will not fit. Largest engine we have that will fit is a 34cc
OK THANX
HOW MUCH IS IS THE 34CC ENGINE
Sounds good, thanks for the suggestion!
Great video guys..
Is there a specified torque for mounting the exhaust?
It helped. Thank you OBR
Gday mate, I have a few questions regarding an engine. i am thinking about buying a 34cc engine off you guys but i am unsure of what the difference between a normal engine and a long block is? secondly, i do not have a torque wrench but would doing all of the bolts up nice and snug do the trick? cheers
+jack oliver They are both exactly the same but the long block is basically a stripped down version of a complete engine. You can save money going with a long block but you'll need to complete it with your stock engine.
Ok sweet as thanks heaps!
+Sean O'Neill you answered my question that i have been researching for a month now lol..thanks!
How does any of this “Double” the power?
What allen key is that you use
A 5mm bolt probably wants a 4mm Allen key.
I’m fond of the Bondhus brand, especially the ones which resemble screwdrivers.
Have a 43cc (Zenoah) engine, which I plan to use in an emergency generator.
Double power? Anyways nice info in regards to the engine shroud and cooling
All of our long blocks are ported and will have more power than a stock engine. A long block basically is a cheaper alternative to buying a complete engine if you have a stock engine you can complete it with.
does signature series have more power?
Sorry to bother anybody but I'm having trouble with my engine it's a cy 29cc where the clutch holder/plate goes on the crankshaft its supposed to be a friction fit with a retaining bolt in the centre but no matter how tight in make the bolt the crank just spinning in the clutch plate
Like that lil torque wrench so small
any one know what type of torque wrench that is? Brand?
We use a CDI torque wrench
can I put that on my 32cc
Yes you can
can you put a video on how to replace stock engine to a long block engine? Thanks
This dude could put this together in his sleep!
How does this double my power?
You're buying one of their built longblocks and bolting on parts from your existing engine. So their built engine is double the power of your old engine.
NIce!!
good video but needs better sound
That Dan guy is a sausage smuggler!!!....:)
Engine.
Motor runs off of some kind of electricity.
Double power by putting it together....no. It goes from a 0 power pile of parts to whatever power it can normally make.
Nothing in this vid doubled horse power
JÄGERMEISTER...............the best......lol
lmao a losi business card
My wife beat the shit out of my go cart someone please help
A torque wrench? LMAO.. dont forget blue lock tight.
They are Waxing for their engines lol 😅😅
What is the torque spec for the exhaust bolt thanks
70 in/lbs
Thanks for the reply man when I want to do the right thing I always watch your video thanks again man
@@anilrc914 You're welcome and I'm glad you've found our video's helpful!