Sticky Beolab 3? How to fix it!

Har du også et par Beolab 3, som med årene er blevet klistrede i overfladen?
Eller måske en mus, gamepad eller andet, der er blevet sticky eller klistret?
I denne video viser jeg hvordan man fikser dette problem og får nogle fine, glatte Beolab 3 højttalere ud af det.
I videoen bruger jeg denatureret sprit eller isopropylalkohol 99% til at rense højttalerne med.
Beolab 3 er bygget over en ICEPower Class-D forstærker, der yder 220 watt.
B&O Beolab 3 er med dens unikke design en fantastisk kraftfuld og vellydende højttaler.
Videoen har engelske undertekster!
Do you also have a pair of Beolab 3 that have started to get sticky over the years?
Or maybe a mouse, gamepad or something that has become sticky?
In this video I show how to fix this problem and get some nice, smooth Beolab 3 speakers out of it.
In the video I use denatured alcohol or isopropyl alcohol 99% to clean the speakers.
Beolab 3 is built over an ICEPower Class-D amplifier that produces 220 watts.
With its unique design, Bang & Olufsen Beolab 3 is a fantastically powerful and good-sounding speaker.
This video has English subtitles!

[@KoseTrading]

Rigtig fint gennemgang af Beolab 3 højtaler. Et kendt problem på Beolab 3 samt Beosound 4 bag cover. Jeg overvejer at købe noget "Paint remover" og give mine egne Beolab 3 en tur og male dem efter. Men fed video. Mere af det.

[@dyhrscorner]

Tak! Ja, det er kolossalt hvilken forskel det gør!

[@MotorkontoretDK]

I et kommende afsnit skiller Christian dem ad og jeg smider noget lak på, måske en candy af en eller anden art

[@KoseTrading]

@@MotorkontoretDK Det glæder jeg mig til at se.

[@MotorkontoretDK]

@@KoseTrading jeg også :)

[@vx.calibre2901]

Thank you for the tear down video🙂

[@henrikfrederiksen3080]

har lige haft fået brugt beolab 2 sub , men den er så klistret på de 3 enhed hvad gør jeg , vil du hjælpe mig tak

[@dyhrscorner]

@@henrikfrederiksen3080 Det er sådan set fuldstændig den samme procedure. Det gælder dog kun selve “skallen” og plastikkanterne på enhederne. Samme som jeg rengør i videoen.

[@michaelbolander9090]

Fin video som alltid.🤗

[@dyhrscorner]

Tack så mycket 🙂

[@vx.calibre2901]

This will bring back to life, but the aging process has already begun, the sticky surface will return. Strip down, sand the factory coating away, prepare, prime and paint to restore a new condition. Reassemble, enjoy.
Honda polished grey looks a close match to the factory rubberised colour...

[@dyhrscorner]

Yes, I know that, but this video was only made to show a temporary, very good solution to the problem, which takes much less time.

[@roholdt]

Det er jo den gode halvsvensker. :) God video og endda på dansk. :) Tak!

[@dyhrscorner]

Selv tak 🙂

[@bithiahdyhr1814]

Hvor blev de fine. Rart med sådan et godt råd omkring det klistrede 👍🏼

[@dortelgaardthesbjerg9079]

Fantastisk 🤗

[@dyhrscorner]

Mange tak 🙂

[@frankmuller8300]

Any negative longterm experience?

[@dyhrscorner]

No, I have not noticed anything negative after the treatment.

[@MotorkontoretDK]

Tak brormand, du er velkommen herop så kan du skille dem ad, så smider jeg noget maling på ❤

[@dyhrscorner]

Ja, vi må finde en weekend til operationen 😜

[@PranishBhaskaran]

Have you tried paining Beolab 2?

[@dyhrscorner]

It’s the same procedure as Beolab 3

[@PranishBhaskaran]

Any idea what type paint I need to buy suits the Beolab 2 outer cover?

[@vx.calibre2901]

@@PranishBhaskaran assuming its aluminium like Beolab 3, sand the factory crap off, prep surface with 600 grit, use a couple of coats of etching primer and top coat of your choice. Sorted.

[@PranishBhaskaran]

@@vx.calibre2901 Thank you so much for your guidance. I have tried your method and the woofer surrounding improved a lot, removing the melted rubber particles. Painting job, want to check the type of material so that I can apply the right type of primer.

[@nature_guy]

Different looking speakers, interesting. Good for little spaces. Great video! Do you have Emotiva over there?

[@dyhrscorner]

Yes, we have Emotiva amplifiers over here.
High quality, a lot of watts and quite expensive…at least for my wallet 😜
You can read more about BeoLab 3 here: www.beoworld.org/prod_details.asp?pid=365

[@nature_guy]

@@dyhrscorner Yes Emotiva sounds real nice. Now all my cd's sound much better than they did before. True stereo... :-)

[@dyhrscorner]

I've just added English subtitles to this video, it may be a little easier to understand all the Danish babble!

[@nature_guy]

@@dyhrscorner Hey Thanks Chris!

[@cassio2999]

video starter 3:27