I have a Frankenstein YC 184xx. The jug and head are Takegawa, but the body is from a yx 140 I believe. The guy tapped the bottom for the metal oil line. Thing that sucks is it has the spin filter inside and not the side case with the paper filter.
Hi, i have fitted the 184cc kit to my yx160 and bought an 8mm high lift cam and harder single valve springs, what size and brand carb did you use for this engine ?
I have a yx 140 simi and gears won't down lower than 3rd but will go in 3 an 4th . Tire is stuck, kick start is stuck so I can't start it. What can the the problem. The. Piston dose move and the fly wheel moves so it's not froze up . I'm lost . Cant find any rebuilds on simi only manual
Hi, could you tell me what torque you give to the Lifu clutch nut and the crankshaft? I'm setting up a 155 zongshen engine and I'd like to know. a greeting
Lol I’m always breaking a tooth in box. F ing nightmare. Not the first I’ve bought new instead of fixing ($200 new 125cc engine) I can’t get gears cheap either. I think I’m hurting gears when landing open throttle (I’m on Chinese 125) At $1000 new I don’t expect bikes to hold up
I have this engine and the 2nd gear doesn't work selects but makes a noise and like it is in neutral I want to strip it but the strip down looks to complexed to rebuild it back but really like the engine what do I do ? Thanks In advance
I've been a mechanic 30 years now let me tell you it's not that hard I always take pictures of everything before I remove any parts it helps alot pluse look at every part removed inspect both sides to be sure it's not ment to be installed in a certain direction take your time is the best way
Iv got the same problem with my KMXR MR2 160cc on mine second gear is missing so Iv orderd a new gearbox and full engine gasket set make sure you buy a full engine gasket set for your engine
I'd recommend getting the tb parts v2 head for the klx110 and yx engine with there 577 CAMSHAFT they rip and better head flow over a normal yx head even better than the 4 valve yx head
sorry to be so off topic but does anyone know of a way to get back into an Instagram account?? I somehow forgot the account password. I would appreciate any tricks you can offer me.
@Dax Benton i really appreciate your reply. I got to the site thru google and im trying it out atm. Looks like it's gonna take quite some time so I will get back to you later with my results.
I have a welsh pit bike 170, it will not go in to neutral the rear wheel is locked and kick start is solid, Iv pulled the clutch side apart but um unable to pull the clutch basket off its jammed tight can any one help
If u go with a tb parts v2 head it will the stock yx160 heads are honda ports so it won't work, perfer just doing a big bore kit on the klx and then do the klx race head if you want more power
![[LIVE] นาทีนี้ต้องพี่ทนาย | ทนายแก้ว vs ทนายไพศาล | #คุยให้เด็กมันฟัง EP.47 (02/11/67)](http://i.ytimg.com/vi/HmquaO-PL_M/mqdefault.jpg)
I have a Frankenstein YC 184xx. The jug and head are Takegawa, but the body is from a yx 140 I believe. The guy tapped the bottom for the metal oil line.
Thing that sucks is it has the spin filter inside and not the side case with the paper filter.
Hi, i have fitted the 184cc kit to my yx160 and bought an 8mm high lift cam and harder single valve springs, what size and brand carb did you use for this engine ?
Hej where did you buy the cam?
found my problem, nice video thanks man
Hi! What is the oil strainer cap for at 8.29? Manual says it is oil strainer cap but nothing else. Is there oil filter under it?
Hmmm can you fit Daytona anima cylinder? 🤔🤔🤔
I have a yx 140 simi and gears won't down lower than 3rd but will go in 3 an 4th . Tire is stuck, kick start is stuck so I can't start it. What can the the problem. The. Piston dose move and the fly wheel moves so it's not froze up . I'm lost . Cant find any rebuilds on simi only manual
Cool vid. What’s your bench made from. ? What a great set up.
how does this engine compare in power and price to the zs190 that is very popular?
Leaves them in the dirt. The cam profile makes these bikes almost as responsive as the big DOHC dirt bikes
@@alexscott5990 Not the 212cc 4valve though.
@@warrenpeas 100m race? Maybe 200m? The 212 will have blown up
Hi, could you tell me what torque you give to the Lifu clutch nut and the crankshaft? I'm setting up a 155 zongshen engine and I'd like to know.
a greeting
Lội máy đó tôi mua ve cái lồng nó kêu quá vậy có cần thai không bạn
Great video.How did you remove the flywheel nut without the motor turning? I can't get mine to loosen off.
hi .
this i have done whit a milwaukee impact wrench
;)
hey man do you still have this engine? if so could you take it apart again and show me how your gearbox is shimed?!
Herman Wallin lol. U rlly think he is going to do that
Lol I’m always breaking a tooth in box. F ing nightmare. Not the first I’ve bought new instead of fixing ($200 new 125cc engine) I can’t get gears cheap either. I think I’m hurting gears when landing open throttle (I’m on Chinese 125) At $1000 new I don’t expect bikes to hold up
I have this engine and the 2nd gear doesn't work selects but makes a noise and like it is in neutral I want to strip it but the strip down looks to complexed to rebuild it back but really like the engine what do I do ? Thanks In advance
I've been a mechanic 30 years now let me tell you it's not that hard I always take pictures of everything before I remove any parts it helps alot pluse look at every part removed inspect both sides to be sure it's not ment to be installed in a certain direction take your time is the best way
Iv got the same problem with my KMXR MR2 160cc on mine second gear is missing so Iv orderd a new gearbox and full engine gasket set make sure you buy a full engine gasket set for your engine
What head do u have on this and was the kit hard to install thinking of doing this to mine👍
I'd recommend getting the tb parts v2 head for the klx110 and yx engine with there 577 CAMSHAFT they rip and better head flow over a normal yx head even better than the 4 valve yx head
Hola como estas quiero saber cómo puedo poner una 160cc en tiempo porfavol
Great video, are the intrenals in this engine the same as in the yx150/160? Like the gears and stuff?
Hi
This was a 160cc engine
only replace the piston cylinder and head
What tool was that to pull the stator for this motor and also what tool was that to pull the clutch
wholesale-cycle.com/product/1685/FLYWHEEL-PULLER-PIT-BIKE-CRF50/
Hi ... Could you tell me what torque the two camshaft bolts go to? And to the clutch nut to the crankshaft? At 4 nuts on the cylinder head?
sorry to be so off topic but does anyone know of a way to get back into an Instagram account??
I somehow forgot the account password. I would appreciate any tricks you can offer me.
@Ralph Kyson instablaster =)
@Dax Benton i really appreciate your reply. I got to the site thru google and im trying it out atm.
Looks like it's gonna take quite some time so I will get back to you later with my results.
@Dax Benton It worked and I finally got access to my account again. I'm so happy:D
Thanks so much you saved my ass!
@Ralph Kyson you are welcome xD
Pnp to cub?
Já imaginou um motor desse numa Pop 100 da Honda, aqui no Brasil nos ia dar coro em Twister.
why did you take it apart? just to show it or does it need something replaced or a rebuild
it was for a longer second gear in the engine
and to show you :)
Let's Make it ok
Salut tu mes quoi comme huile
I need this head and block . Can i buy
1965 s65 SCub?
How mm of piston?
máy này bao nhiêu phân khối vậy giá bán thì bao nhiêu ??
Harga berapa bos
Buddy where do you get all your parts from ??
local story :)
Hp?
Good video this.
how to i get this engine...what brand and model..tq
www.gpcube.be/
Hi, did you ever film the rebuild?
Great video, camera work A+
Australia
HI.
Soon I will post the video of the rebuild and some other engine (daytona 150)
Stay tuned ;)
@@letsmakeit8971 will this engine fit & bolt directly onto a honda atc 110 3 Wheeler frame?? If not how can I make it fit?
can you show me the intructions for piston rings please?
Hi, can you pass me the description of the crenellated key of the clutch disassembly? minute 2:30. thanks
And.. the description of the magnetic plate extractor. to buy it. Thanks
May này có nhập hàng Việt nam kg vậy
Máy tầm 190cc.....giá gần 30 triệu
Piston ?mm
Cual es el presio
I have a welsh pit bike 170, it will not go in to neutral the rear wheel is locked and kick start is solid, Iv pulled the clutch side apart but um unable to pull the clutch basket off its jammed tight can any one help
Shes clapped
At 3:45 what is that whole mechanism. The springs and levers?
Pretty sure all those things are clutch stuff
Or kickstart stuff
is the head of this engine can fit on klx ?
If u go with a tb parts v2 head it will the stock yx160 heads are honda ports so it won't work, perfer just doing a big bore kit on the klx and then do the klx race head if you want more power
Good video mate
Good music back round
I'd rather hear tools clanging and heavy breathing over this music... MUTE
Likewise.
У меня на Альфе такой)
Vejo mexer muito nesses motores,
motores chineses, rodam 15h parte qualquer coisa, lol
Also, watch the video how to clean a carburetor
th-cam.com/video/-IeWSE6dIVU/w-d-xo.html
Nice😯
Malesef Türkiye de böyle malzeme yok gönderilmiyor Türkiye dışlanıyor
Ooof. I'd rather just buy a new one
Que cuesta esa máquina
verry nice :)
Its engane parchez
I ned 1 machine
whats the song playing in the background
Warriyo - Mortals (feat. Laura Brehm) [NCS Release]
Theme songs ?🤓
I ned one my form Morocco
hi bro can you give your fb acount to ask you something?
150куб
its a combination honda and kawasaki parts. nothing special about this china engine.
All this a copy of honda.
lha oppo yo te yuu
Ch
is the head of this engine can fit on klx ?
Yes. The YX is a KLX clone.