3:26 - You can right-click on amp, select “Lock All But Amp” and then right-click on cab and choose “Unlock Cab.” That will lock your entire signal chain minus the stack. Just a little time saver tip.
First, thanks for showing how to cut and paste the performance by locking down the effects. Nice trick! Second, just want to say thanks for jamming at then end. It was honest and quite good.It felt free and matched well with the song. I get my Kemper next week. look forward to watching more vids. take care.
Uggggg feel so stupid. I couldn't figure out how to pick rigs in RM to make performances. It's just a copy/paste! Quick question - is there a way to set the effect buttons on the remote from RM?
Same here! The effects button before and after the amps are not showing the of off lights (always off), and I would have to manually go turn it on and save it. How to make rig manager have these lights enabled when we copy and paste effects onto the slots?
My dude, what a great video and thank you for the resources! Just got the Zrecker pack and digging it as well. Long been a fan of the Kemper and Tone Junkie, but I was stuck in the old ways and just updating to the new Rig Manager and all of that stuff. Had no idea how to utilize or implement these things, but the presets and all of that on the Rig manager is so great! Just for the TJ Tone Tools and I'm going to start building some performances! Sure I have your 100 pack (that the sooze killed), and I've got them from GFHG, the WT dudes, Brian carl, but I've never felt like I could make a performance until now that would turn out great. Working on the toaster itself just wasn't a good work flow for me, but this looks awesome. You are a gentleman and a scholar and thank you so much for the great leader you are in the Kemper community!
Greatest thing ever? Your face at 9:57. On the back of the kemper there are things that screw around the 1/4 inputs. One of mine is missing. Can you purchase these anywhere?
I assume you’ve figured it out now but it’s probably that you are trying to copy the wrong component onto the wrong component. For example, trying copy a preset onto a performance rather than an effect block.
Ok HW, the playing was absolutely epic. My son was like, "Dad, I wish you were allowed to play like that for your new worship gig". But be honest, were those really your Sunday morning game faces? lol
Joseph Grimstead hahah, ok you got me. These were my, playing guitar alone faces! I’m a bit more reserved with the faces on a Sunday. Dial this back about 50% and it’s Sunday morning me! 😂
I never got along with the performance mode. The performances themselves don't seem to save even when hitting the 'store performance' button in the lower righthand corner.
Hello ToneJunkie TV-I'm having an issue using Rig Manager and saving the tempo for performances in the performance settings. I will type in a tempo in the performance settings for a specific performance but then when I go into the Rig info on my Kemper Stage for that same performance where I saved the tempo in Rig Manager, the tempo rarely seems to align with what I'm saving it at on the Rig Manager. Or, sometimes I'm noticing that I will save different tempos for different performances in Rig Manager but when I go to the Stage and look under each song, it will change all the performances to the last tempo I saved for a performance in Rig Manager. I've also noticed, the tempo knob at the bottom on the screen (on the Rig Manager) doesn't align with the tempo I type in for the performance settings on the right side of the page on the Rig Manager. Any help you can give me I would greatly appreciate, thanks so much!
By just turning it off with the off button on the right of each slot. I don't know if any other way of "deleting" slots. If you turn them off they simlpy do not appear on the physical buttons. I think this is what you want.
3:26 - You can right-click on amp, select “Lock All But Amp” and then right-click on cab and choose “Unlock Cab.” That will lock your entire signal chain minus the stack. Just a little time saver tip.
THANK YOU 🙏
First, thanks for showing how to cut and paste the performance by locking down the effects. Nice trick! Second, just want to say thanks for jamming at then end. It was honest and quite good.It felt free and matched well with the song. I get my Kemper next week. look forward to watching more vids. take care.
Sometimes it will not allow me to paste. Why?
Very helpful...this is exactly what I was looking for. Thank you!
We need to do still shots of all the guitar faces at the end.
Saving this video for later. Learned a lot already from this channel and its a good time to prepare the Kemper for live use again
Uggggg feel so stupid. I couldn't figure out how to pick rigs in RM to make performances. It's just a copy/paste!
Quick question - is there a way to set the effect buttons on the remote from RM?
@lance Holland I was going to ask the same question for Kemper Stage.
Same here! The effects button before and after the amps are not showing the of off lights (always off), and I would have to manually go turn it on and save it. How to make rig manager have these lights enabled when we copy and paste effects onto the slots?
Can the TJ Tone Tools be bought as a pack?
Tried the copy/paste with rig mgr 3270 and it did not send it to my Kemper Stage which was successfully connected....???
Great stuff HW. Very informative.....& nice playing as well. Thanx heaps.
My dude, what a great video and thank you for the resources! Just got the Zrecker pack and digging it as well.
Long been a fan of the Kemper and Tone Junkie, but I was stuck in the old ways and just updating to the new Rig Manager and all of that stuff.
Had no idea how to utilize or implement these things, but the presets and all of that on the Rig manager is so great! Just for the TJ Tone Tools and I'm going to start building some performances!
Sure I have your 100 pack (that the sooze killed), and I've got them from GFHG, the WT dudes, Brian carl, but I've never felt like I could make a performance until now that would turn out great. Working on the toaster itself just wasn't a good work flow for me, but this looks awesome.
You are a gentleman and a scholar and thank you so much for the great leader you are in the Kemper community!
Thanks a bunch HW! I have the Stage so this helps tremendously!
I found this super helpful HW! Thanks!
Greatest thing ever? Your face at 9:57.
On the back of the kemper there are things that screw around the 1/4 inputs. One of mine is missing. Can you purchase these anywhere?
any suggestions on videos that just take it from the most basic starting point?
Mine won’t paste. When i right click the paste button isn’t highlighted.
Same issue here.
I assume you’ve figured it out now but it’s probably that you are trying to copy the wrong component onto the wrong component. For example, trying copy a preset onto a performance rather than an effect block.
HW, I would be super interested in a Polytone profile pack if you can get your hands on one. Thanks for all the content!
Ok HW, the playing was absolutely epic. My son was like, "Dad, I wish you were allowed to play like that for your new worship gig". But be honest, were those really your Sunday morning game faces? lol
Joseph Grimstead hahah, ok you got me. These were my, playing guitar alone faces! I’m a bit more reserved with the faces on a Sunday. Dial this back about 50% and it’s Sunday morning me! 😂
I thought you copy all effects as well without the lockfunction right? I do not see the use of the locking setting for copying
I never got along with the performance mode. The performances themselves don't seem to save even when hitting the 'store performance' button in the lower righthand corner.
how many effects possible to have in a chain?
Hello ToneJunkie TV-I'm having an issue using Rig Manager and saving the tempo for performances in the performance settings. I will type in a tempo in the performance settings for a specific performance but then when I go into the Rig info on my Kemper Stage for that same performance where I saved the tempo in Rig Manager, the tempo rarely seems to align with what I'm saving it at on the Rig Manager. Or, sometimes I'm noticing that I will save different tempos for different performances in Rig Manager but when I go to the Stage and look under each song, it will change all the performances to the last tempo I saved for a performance in Rig Manager. I've also noticed, the tempo knob at the bottom on the screen (on the Rig Manager) doesn't align with the tempo I type in for the performance settings on the right side of the page on the Rig Manager. Any help you can give me I would greatly appreciate, thanks so much!
Do you sell that delay preset 1/8?
how do you delete a performance or single slot in a performance with the Rigmanager? thx
By just turning it off with the off button on the right of each slot. I don't know if any other way of "deleting" slots. If you turn them off they simlpy do not appear on the physical buttons. I think this is what you want.
Copy & Paste the "Crunch" Rig from the empty (i.e. New) Performance
Eres un capo!
Alhamdulillah