I was depressed when I saw the quality that you managed to get with you vehicles at N Gauge.... Then I noticed you have a resin printer (I'm still using a FDM). Your cars look miles better than mine. Well done!
Thank you iv done alot of Research The Mars 2 pro is 2k that I started out with but I'm upgrading to a 4k later on for more detail and I like making Figurines to have for Display
Dude, after watching this video, I’ve made up my mind about getting a 3D printer. I tinker with Ho scale but Im thinking of so many other things I could do with one since I’m really into making things and not giving Walmart my money unless I absolutely have to. The detail on all those resin ones are good: even though some of them got f$&@ed up, the ones that turned out sick far outnumber the bad. I have to get one man!!! 😎
Impressive quality. I also print in N scale, but using FDM. Resin has a notably higher detail level. Pretty sure that VW bus is the same I printed, and precision wasn't enough to print all the very thin frames. Is resin warping common for resin printing?
Very nice models! My dad and I bought a Saturn 3 Ultra 12k to print N scale models, however after almost a week of trial and error we do not seem to get anything printed, it just seem to small. What are your exposure time and layer height? Please let me know, thanks!
It Shouldn’t matter How long You work On Your Layout You work on it till you Get tired then take A Break from it. You have the Time Go for it. It’s not a Race to get it Done It’s A Passion Remember that.
Dang those are nice. I hope I can print cars and buildings as good as you. I started my N scale railway last month. Bought a Resin 3D printed house on ebay and was impressed with the quality. So I bought one and it was delivered yesterday. Came with the slicing program that I put on my computer and was playing around with it today. Didn't know what I was doing and the program did not start slicing the Gondola car I downloaded from the internet. So I gave up and will play with it again tomorrow. Did not realize I needed the wash and curing station. Once I figure out how to use it I think it will be fun printing out things for my layout. I started this TH-cam channel to post my layout build once in a while. One thing for sure is I did not expect it to be so expensive!
The links are in the description I just typed in n scale and just look for different things that I like at times they don't have the names the only thing I would do is look up n scale in the Search bar on the websites.
they are in the description now just type what your looking for sometimes you just have to look for ho or N scale most of time because some people don't name their files exactly what you're looking for.
@@nscaledivision2336 ok I’m using one at my library right now filament roll type I’m down to this elegoo, anycubic and the flashforge Im leaning elegoo at moment based on reviews Thank you for getting back to me
@@N_scale your very welcome I'm still learning as I go there's different resin for temperatures so make sure u look out for that and I Recommend water wash resin that's what I'm going to try here soon and high temperature as well I be going over all this In the next video.
@@nscaledivision2336 ok I will buy their brand to start same as machine No messing around at the beginning. I like how many more Color’s and price of the reel. You kinda want both printers don’t you? If you had only one resin…?
That is a handy little machine. Great job and thanks for sharing! Dave
Glad I can I like to share what I do
I was depressed when I saw the quality that you managed to get with you vehicles at N Gauge.... Then I noticed you have a resin printer (I'm still using a FDM). Your cars look miles better than mine. Well done!
Thank you iv done alot of Research The Mars 2 pro is 2k that I started out with but I'm upgrading to a 4k later on for more detail and I like making Figurines to have for Display
Dude, after watching this video, I’ve made up my mind about getting a 3D printer. I tinker with Ho scale but Im thinking of so many other things I could do with one since I’m really into making things and not giving Walmart my money unless I absolutely have to. The detail on all those resin ones are good: even though some of them got f$&@ed up, the ones that turned out sick far outnumber the bad. I have to get one man!!! 😎
Awesome
Impressive quality. I also print in N scale, but using FDM. Resin has a notably higher detail level. Pretty sure that VW bus is the same I printed, and precision wasn't enough to print all the very thin frames. Is resin warping common for resin printing?
On some of them it just happens time to time
You can use the messed up ones as part of a battle damaged post apocalyptic diorama.
Thats not a bad idea
Most of these look great! Are you printing them level to the plate, or do you tilt them? I'm curious how you're supporting and printing them.
I use the stock supports in the program but at time I put supports are needed and I Usually have them flat or in a tilt.
Very nice models! My dad and I bought a Saturn 3 Ultra 12k to print N scale models, however after almost a week of trial and error we do not seem to get anything printed, it just seem to small. What are your exposure time and layer height? Please let me know, thanks!
It Shouldn’t matter How long You work On Your Layout You work on it till you Get tired then take A Break from it. You have the Time Go for it. It’s not a Race to get it Done It’s A Passion Remember that.
thank you
Your Welcome Besides it’s the Truth.
@@elleryparsons5766 oh yeah I totally agree
I think if you sand down those scrapers and use a blade sharpener you can save them, just a thought instead of tossing them
Thanks thats a great idea and I used in a junkyard
Awesome!
Thank you
Dang those are nice. I hope I can print cars and buildings as good as you. I started my N scale railway last month. Bought a Resin 3D printed house on ebay and was impressed with the quality.
So I bought one and it was delivered yesterday. Came with the slicing program that I put on my computer and was playing around with it today. Didn't know what I was doing and the program did not start slicing the Gondola car I downloaded from the internet. So I gave up and will play with it again tomorrow. Did not realize I needed the wash and curing station.
Once I figure out how to use it I think it will be fun printing out things for my layout.
I started this TH-cam channel to post my layout build once in a while. One thing for sure is I did not expect it to be so expensive!
I agree it can be expensive but it's a fun hobby to do I injoy it one you get the 3d printing down it's alot of fun to make things
Nice, where do u get the print models of ur small cars like the Beetle or VW T1?
The links are in the description I just typed in n scale and just look for different things that I like at times they don't have the names the only thing I would do is look up n scale in the Search bar on the websites.
Put a thin piece of glass on the platen and adjust the printer head. Easier to clean up.
Abrams tanks.look good
Thank you iv been trying to find out what they was called,and agen thank you
Where can I purchase the product, Etsy? I'm looking for a N scale sized crane
what kind of crane you looking for?
@@nscaledivision2336 tower crane
You know where I can get the files? I have the websites
Everything is in my about page or main page
Wow do you have a wed site
they are in the description now just type what your looking for sometimes you just have to look for ho or N scale most of time because some people don't name their files exactly what you're looking for.
Hi
Hello
Elegoo is this 4k
it's 2k I wish it was 4k but I think you can upgrade to 4k but not sure
@@nscaledivision2336 ok I’m using one at my library right now filament roll type I’m down to this elegoo, anycubic and the flashforge
Im leaning elegoo at moment based on reviews
Thank you for getting back to me
@@N_scale your very welcome I'm still learning as I go there's different resin for temperatures so make sure u look out for that and I Recommend water wash resin that's what I'm going to try here soon and high temperature as well I be going over all this In the next video.
@@nscaledivision2336 ok I will buy their brand to start same as machine
No messing around at the beginning. I like how many more Color’s and price of the reel. You kinda want both printers don’t you? If you had only one resin…?
Surprising People Haven’t contacted you on what you do.
Same here but still trying to fine the right Settings for the resin
If I get the same one he has I’ll be contacting him to sho.🎉
Hand held cams sucks
I agree