Another Way to Use your Polymer Clay Scrap - Extruder Cane Tutorial
ฝัง
- เผยแพร่เมื่อ 17 ก.ค. 2016
- Donations via StreamLab: streamlabs.com/gaylethompson
Please visit my Amazon Influencer Site: amzn.to/2BH4eX7
My Amazon Wish List: amzn.to/2uryPqK
Polyclayplay link: bit.ly/2BJ1sQW
Please support my future polymer clay videos by contributing to:
1 - my Patreon account: / gotclay
OR
2 - You can also make a donation through PayPal at this link: goo.gl/WG2s93
Email me at luv2clay@gmail.com
Facebook: / g0tclay - แนวปฏิบัติและการใช้ชีวิต
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
Great tutorial. I’ve not been doing my clay for 4years!! But seeing this has got me excited to start again. I see this is 6yrs. 👍👍💕💕🐶🐶❤️🇬🇧🇬🇧
This was fabulous! I’m learning so much and your “random” design choices are works of art. Thank you!!
Thank you so much. I am no longer able to work with polymer clay due to a shoulder issue but the techniques I've shared will always be relevant. Thanks for watching!
I've been lazily pondering what to do with my scrap clay and came upon this video. That adapter you used inside the square blew my mind to the point my dogs came over to check that I was okay. I'm about to be extruding clay for days. Love your vids, and I'm truly grateful for you sharing your creativity with the world.
Thank you so much now I must get an extruder and the center piece they turned out fabulous
No way!!! Amazing, I love this. I am shocked at how the cane came out like a flower already. Possibilities are endless. Thank you!
You are so welcome!
Yes I love real time , especially since I'm a beginner. Thank you!!
Thank you so much, I never knew that there was adapters for the extruder. I will definitely have to order some. I am new to polymer clay, about a year. Thanks again for sharing your video.
Thank you. I really enjoy your videos 👏🤩
Yet again, lovely! Thank you loads!
Great tutorial! I am new to polymer clay. You have been so helpful.
Good to watch a well explained video, about exactly how the extruder adapter works. Thank you 😊
Thanks! It is so much fun playing with the extruder! I wish I had time to "play" more!
FANTASTIC!!! Thank You!
loving this look, tfs
Loving the technique tutorial, l'm a 20 clayer and this is my first time seeing the change of effect by adding the insert, NICE!!!. l watched or read a polymer clay tip somewhere that showed a plunger type extruder not twist handle kind and using a chalk gun to easily express the clay. A huge hand saver! You lay it in the chalk gun just like the regular use of a tube of chalk ... put the extruder in and squeeze away with Ease....#nohandfatique
Dear Gayle, I love watching your channel. Please continue to teach to us how new tools are used. Like the turtles and any thing extra to use with extruder.
Thanks! Glad you like my tutorials!
That looked so pretty when you were rolling it.
Thank you so much, Gayle! Very helpful.
So glad!
I learned a great deal from your video. I just got an extruder as a gift. I can't wait to try your techniques. Thanks!
I love extruder projects. That is probably my favorite technique.
I love this thanks
thanks for thinking of us first timers
Greatttt! Thank you very much for your contribution!
Now Ive gotta get one of those adapters for my extruder!! Thanks!!
I love them!
I'LOVE THE TUTORIAL ,TANKS.
Thanks for watching!
eliane amin awww, the tanks is so cute!
Thank you for sharing your art and ideas...I have quite a bit of scrap clay and this tutorial inspired me to try new canes:)
It's always great to know I've inspired you! Thanks.
I need that coring tool!!!! Lol. Okay, I want that coring tool!!!! Lol.
I tried this but my holes were larger so flowers were different. I didn't realize there were 2 sets of the cores. Lol, ordered the smaller ones. Still had a ball! Thank you!
I love this! I've actually seen it before, since I'd already clicked like, but watching it again after having played with the clay for a time, I can really appreciate this. I've got lots of scrap on my table and I've got the Makins clay cores! I'll have lots of fun tomorrow!
Glad you were inspired! Thanks for sharing!
Love this tutorial Gayle. I can't wait to try this. tfs Linda
Thanks!
thank you for doing this video. it showed me other things to do that I hadn't thought of!!😂
Hi Gayle I love your tutorials, am new ti polymer clay but I love it, and your my favorite of all thanks.
Thank you very much! I hope you are able to learn a lot from my videos!
Love Love it
This would be really cute to put on a picture frame.
Wow! This was SO fun! I love all your projects, I'm new to canes, so I love all your tutorials! :-D
Thanks! I love to make canes - I just don't know what to do with them after I make them! That's why I'm trying to use up my old canes before I start making more. Thanks for your encouragement!
I really enjoy your tutorials. I’m very much a beginner. But envision a new, really fun, ability for creative expression
WARNING! Polymer clay can be addicting! Have fun!
Do you remember what brand the bright pink and green color came from ?
Very cool:-) thanks for this great idea of using scrap clay, love it xx
Thanks!
Thanks for the info. I've used the extruder years ago, but either forgot some tricks or these are new to me.
Thanks! Glad you like it!
Omg that's so cool
Fantastic
Thanks!
What fun!
Oops, I found the link for the core tools! Thanks again.
They are also available at Polyclayplay.com. Trish is a great person that has wonderful products for clay! www.polyclayplay.com/Cart/products/Makin%27s%C2%AE-ClayCore%E2%84%A2-Adapters.html
I love "doodling" with scrap clay. Always amazes me, how many unique pieces can be made, just by playing around at leisurely pace 😊
I am so glad you commented! Unfortunately, I don't have much time to work at a leisurely pace any more. Everything I do now has a purpose! But I love it!
As always, thank you Gayle for taking the time to make these videos. You are an inspiration! 😊
Aw, thanks!
really loved this video, off to play now thank you for sharing. Just a though, I struggle most with color combinations particularly Reds/Oranges. A video on deciding on your colours and how you make those choices would be very helpful.
I'm afraid color is not my strong point. I am color challenged myself. Try Googling Maggie Maggio and Lindly Haunani. They are both experts with color! Cindy Lietz (Polymer Clay Tutor) also has color recipes and pallets that coordinate. Any of these will help.
Thank you for the tip, will google those
Flowers in yellow white and red with the extruder into a cane
awesome video
Thanks!
Absolutely wonderful as I'm kind of a beginner! Could you link the core tool? Thank you so much Gayle. :) You are a great teacher.
Thank you very much!
Oh, & my larger ones are too big for my green Makins extruder. I contacted the company & they are sending me some replacements! Love companies that take care of their customers!
I don't know what size your dies are but I have an adapter that fits my Makin's extruder which allows me to use larger dies. Maybe that's what they are going to send you?
@@Mimismarketva from what I understand they redesigned the barrel of the extruder, and when they did it became slightly smaller. The Clay Core discs (3.5, 4, 4.5 mm) purchased through Amazon this month were older & slightly larger than the new ones so they didn't seat properly. I contacted Makin's and they are sending me the new ones, free of charge. 5 star customer service!!
So you can use larger discs? Who makes the larger discs?
Hi Gail where can I get adaptor's ? I love to watch your videos .
I love these could I ask do you have a link for the piece used that made the hole thank you
I'm sorry. I'm not sure what tool you want without watching this video again. It's pretty old. BUT if it is the core adapters here is a link for them in my Amazon store. They come in 2 sizes so be sure to order the 1-3mm set.
смотрится достаточно интересно
Can the extruder be used on its own without any discs?
I’m a complete novice at polymer clay, and I found this tutorial extremely interesting and informative. I’ve just subscribed to your channel. Thank you so much for sharing your knowledge and experience.
Thank YOU for subscribing! I am so glad you enjoy my tutorials. Most of my subscribers are beginners so I try to keep my tutorials at a level that they can accomplish themselves.
This pattern would make a nice bracelet.
Yes, it would!
Awesome e
nice vid - would you mind posting the link for the core adapter? thanks.
Thanks for watching my video. Here is the link to the core adapters on Amazon. They come in 2 sizes. Be sure you get the one with 1mm, 2mm and 3mm cores if you want to do the extrusion. The larger sizes are 3.5mm, 4mm and 5mm which leave larger holes.
goo.gl/sr67au
Thanks!
Awesome video, i don't see a link for the adapter. Can you please tell where can i get the adapter? Thank you.
Sorry. It is my response to another comment below. Here it is: www.polyclayplay.com/Cart/products/Makin%27s%C2%AE-ClayCore%E2%84%A2-Adapters.html
Thank you
Hw cool.............would love to know how you made the pink and green clay?
Actually it was some scrap clay left from a project that I just marbled together. I probably could not do it again! Thanks for asking!
Thank you for the quick response............would love a tutorial for marbling!
If you flip the core tool, do you still get a hole down the middle?
I don't think so but it might! Why don't you try it and let us know!
Wow!! This is too cool!!! I've never heard of an adapter for the extruder! I don't have a green one but I have one of those black ones, oh what's it called (here goes my A.D.D./Alzheimer's again) Walnut Grove, lol no that's little house on the prairie . it's walnut something. Anyway, I bet one of those adapters would fit it. I love how it turned out. it puts me in the mind of a granny square Afghan.
You are so funny! You must have the Walnut HOLLOW extruder! You were close! Yes, the adapters will fit that one too. The dies are also interchangeable so if you see some of the Makin's or LC Clay dies, they will all fit. Thanks for watching!
Gayle Thompson Lol! Yeah I was close but no cigar. I never can hit that bulls eye. Yes it is a Walnut Hollow, I remember now, thank you. That is good to know about the interchangeable dies. And no problem, I love watching. You are actually the first, no second, person I don't mind watching in real time, Sara Evans being the first. If I ever made videos I would probably have to do it in real time because I know nothing about editing. And I cant believe you and Donna Kato are friends! What the heck?? And you were the president of that guild and stuff, wow!!
+Missi R Not president - vp-membership. Judy Belcher was president. We were a great team! Donna ' feather cane workshop was the first clay workshop I ever attended. Then the Orlando guild invited her to the first Fandango. That's where we became friends. We stayed in touch for a long time. We both owned greyhounds! I picked her up at the airport one time and she treated me to dinner where she gave me some good business advise. Little did I know that my mother would come visit me and get sick. My clay and my dreams had to be put on hold. I got back to my clay but my clay dream never came to be. Now I'm retired and don't have the funds to start a business. So I decided to do TH-cam videos! I'll jump off my soapbox now! Sorry to dump on you!
Gayle Thompson like I said I never hit the bullseye! Still VP is a pretty big deal! Dump on me anytime, trust me I know all about dashed dreams...Im sorry your dream of starting a business went south, but you did the right thing in taking care of your mother. She probably felt bad that her illness interrupted your plans. I hope if something happens to me like that, that one of my children will take care of me instead of putting me in one of those nursing homes.
You were talking about greyhounds. My mom lives in Vegas and theres some sort of greyhound adoption agency out there and she adopted one and named her Willow. She recently died while on vacation with my mom and step dad, and then their little dog that was part yorkie I think, died a month later.
Mom started making homemade soap around the same time she got Willow and named her soap Sweet Willow Soap and she actually has a you tube channel (called Sweet Willow Soap, I think) showing how to make soap. She wishes she had been younger when she learned how because she said she wouldve opened a shop)Now you want to talk about talent, my mom is so talented, everything she does is over the top. I am not just saying that because she is my mom. I think she may be a touch OCD because everything she takes a notion to learning, she excels at it and is very fast also! Her handmade soap is the best! And I have tried a lot of different homemade soaps. Right now, she has taken a break from soaping and is on a quilting kick! She has never done clay, though. She took up water colors a few years back and all my relatives have her paintings on their walls! Its crazy! We all have her paintings, painted cards,her quilts, her soap, lotions, body butters, sugar scrubs, chapsticks, knitted socks, her doilies, afghans, dish cloths, (I crochet too), I know theres more but I am trying to remember it all lol.
That's really neat about Donna Kato! I'd be like,"Hey Donna, you have any new items you would like me to try" lol. Well, even though your dreams didn't come true, I am glad you decided to make videos to share your knowledge. Maybe you will make a tute of how to do the feather cane some day!
Donna's feather cane is on my list of videos I want to do. Stay tuned!
Did you make a bracelet or? Thank you for Sharing :) That Extruder possibly my next clay toy?
No - I just didn't have time! I used most of it to make Hearts 4 Heroes. Thanks for asking!
Oh Okay Will have to find out about that one Hearts for Heros? Never heard of it before? Thank you :)
It is Hearts 4 Heroes on Facebook. The number 4 not the word 'for'.
What dies are compatible with the Makins looking for a small square
There are other Makins dies than the ones in the original set. I believe there are 3 or 4 more sets. I have some of them on my Amazon Influencer page. This one has a small and a larger square. Is this what you are looking for? bit.ly/2F52Tx1MakinsDieSet
To answer your question, most all of the extruder dies are interchangeable. Makins, Walnut Hollow and Lucy Clay dies will all fit all 3 machines.
Where can I get that core plse?
You can get it on Amazon here: amzn.to/3uEzjVy
Be sure to select the smallest ones 1-3mm
👍😀 Can you do the same thing with air dry clay by DAS
Sorry but I really don't know anything about air dry clay so I can't say. Maybe someone here can help.
I couldnt find the kor tool. Link?
They are on my Amazon page under Clay Tools. Here's the link. Be sure to get the 1mm/2mm/3mm size. The larger size is too big. amzn.to/2F8Xi6j
Thanks for asking!
Where's the link to where you purchased it? Am I overlooking it?
If you look at my Rainbow Twist video, the link is in the description. I also think it is in the description in my Q&A Videos. Sorry but I'm not home and don't know how to cut and paste from my phone!
Gayle Thompson Ok I will look, thank you!
+Missi R If you scroll down I had put the link on a previous comment.
Gayle Thompson ok
I call scrap custom colors
Where do I find the core thing
Sorry I was gone for the weekend and had no internet until I got home. Here is the Amazon link. There are 2 options, Be sure to get the 1mm,2mm,3mm size.
@@Mimismarketva there is no link
Sorry about that! amz.run/6kPE
The etsy store has nothing listed....no core adapter....? I want to get one!!
Sorry but I closed my store. However the adapters are available on my Amazon site. Just make sure you get the set that has the 1mm-3mm adapters. Here's the link amzn.to/2SCrGLF
She forgot to put the c9re adapter link again😂
Sorry! I originally had the link in the video description but did a major change to my channel and changed the notes on all of my videos. Here's the link: amzn.to/48zDAfs
That's a tube bread adaptor..... The hole in the middle is so you don't have to drill the beads....
I think they call those mod canes not retro canes
I was around when these were first done and they were called Retro Canes. If the name has been changed, that's OK. It's only a name. Thanks for your comment.
I have the same extruder and my "noodly" strips didn't come together as yours (11:28-11:43) did and instead came out separated. any idea why this is?
UPDATE: It would help if I followed directions better! lol I was using the bigger square instead of the smallest. :)