Soundstream MPQ-7XO Equalizer Install
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- First off please excuse the mess lol
The sound u hear from the subs is from my cracked trunk not the subs themselves.
Soundstream MPQ-7XO
7 Band Equalizer
Just showing how to wire it up as well as talking about different ways to use front and rear outputs.
Hope you like what you see
Be sure to tune in for more
Thanks for watching
Always ground the eq to it's own separate ground. It will help stop engine noise coming through the speakers.
I have this issue now smh
I have the same problem
@@sothobouyvlog331 shit the worst noise man
Everything should get its own good clean chassis ground including your head unit and amplifiers as well as equalizers and crossovers I hate alternator noise 😂
Who else watching without a CLUE? 😂
been a year
What is it that's hard to understand?
@WhiiteKg Appreciate it bro hope u enjoy yours
@@BIGJURAY20 what if I have 2 tweeters and 4 mids? I have the front mids and tweeters on an audio pipe crossover. Would this eq still work?
@Demontae Sanders Yes you can still get total separation between mids and tweeters. It's all how u wire your speakers to your amp
Dude you just explained all my questions on how to install a eq with a headunit, amp, and subwoofer setup in the first 1:30. Thank you!!
Happy I could help. Hope your install goes well
Anyone who complains about wires everywhere and the setup being messy obviously never installed anything more than a plug and play headunit before.
That is crazy messy wiring all over your car. Damn.
i know im asking the wrong place but does any of you know of a way to get back into an instagram account?
I stupidly forgot the password. I love any tricks you can give me!
@Aryan Tadeo instablaster ;)
You should try it from the website and enter forgot password. You should receive a link to your email to change the password and gain access
@@BIGJURAY20 i think hes trying to hack someones account
No matter he'll have to know the security questions to it anyway
Thanks for sharing man been looking for some visual instructions to get mine installed thanks again
No prob bro happy i could help
Hey man great explanation nice and slow and clear thank you very much
Happy to know thank you as well.
Thank as always for sharing your vids bro 🤝🏽 Very helpful.
Appreciate you tuning in
@@BIGJURAY20 No doubt fam. I’m getting ready to install one and I remembered you posting a vid a while back on it 👌🏽
Holy cow. That went way over my simple head. That's way too much info for me, but thanks for posting. I liked & subbed.
Thanks for the love. Sorry this didn't help you. I'll try for a better one
Thanks but I thought u already explained everything really well. I'm just terrible with wiring. Even on DC. Plus I can't even lock my car anyway. I was just curious if I could handle it. And now I know I can't. LOL. When the wires went from your eq to the amp... My tiny brain was "over-loaded". Heh, Heh
Not really hard its prolly just the mess lmao
6:40 thx dude for this video I really needed this🙏🏽✊🏽
Happy to know my video helped
hey dude once again thanks for helping my out and stuff turns out that the input in the preamp was bad thank u very much bro
6:36 The beast has awoken😳
This video's problem Mad old would it comes in very useful for somebody that doesn't know what their doing with in EQ
that eq looks great
Yea it's a very nice unit
Man that's is some serious work and wiring. My question to is did you run a separate amp for your twitters🤔 and I like how you ran it separately from the mid and bass👀👂👍🏾
In this video i was using a 2 channel amp with channel 1 dedicated to Tweeters and Channel 2 dedicated to the mids and had a 1 channel for subs
Your making it easy for the thief’s with all that stuff lying around like that.
That might be but thankfully I never had any issues. I now have a much better system in my new truck
That shit is a fire waiting to happen dude. This shit got me tweaking lmao
It was for testing but never caused any problems
I don't have a bass amplifier I just have a crunch p900.4 900w do it work the same way
If you have a 4 channel using an equalizer can help fine tune your system.
Not bad at all it sounds really good
+PSE Mentalist I'll be making a video of how it came out it's really clear
I had two 18s back in the 90s a sound stream amp a fosgate amp and soundstream mids and highs in a 95 Nissan hardbody and got it all stolen. Never again.5000 dollars gone in one night.
I'm sorry that happened I've been robbed of my system before as well. Definitely not a good feeling
amazing yours actually works, I got nothing.
What happened u have the same unit but no output???
awesome quick response. Na I have a eqs-755 from clarion basically the same thing for the plug ins except mine says main when your soundstream says CD. Anyway my electronic knowledge only goes so far, but I'm trying to hook it up without a 4 channel amp for my door speakers and it's not going well. It turns on, but I have no EQ control over anything. I have RCA's to the Head unit Have a ground to bare metal in the vehicle, got the remote wire with the other remote wires to the factory harness and have the 12 volt to the factory harness. So I guess I have to have the other two RCA's going to an amp, maybe thats why it's not working. Any help is appreciated
By my knowledge with your unit you can either use rcas to an amplifier or the hi input which requires you to use your factory head units speaker output both left and right which allows the eq output side to take effect without the use of input rca. But, equalizers such as these are functional with amplifiers only
Alright, cool thanks for the info man! Ill try hooking it up that way. In the end I think I'm SOL and should just get a 4 channel amp anyway.
You can always get an inexpensive one just to help with fine tuning your system
Splicing the ground to ground will create interference I know this is an older video, but you should not splice your ground into another ground just ground to metal.
Yea i agree which is why i also stated to clean the surface area and apply it's own ground.
@@BIGJURAY20 Sorry I actually made this comment when I saw the bad practice, then you clarified it later in the video. I should have edited my original comment to say something about that
I appreciate you saying something on it.
Interference? Limits output, quality?
I have me a new 4 channel amplifier now do I used sub out put with this EQ
That black widow have a nest.
Tks should be a easy install for me.
I have one amp so can i used subwoofer out put with this EQ for my subwoofer bass
Yes you can
U can but you won't be able to use all the crossover points. Most of them are for mids and highs
Thanks young bruh
i have a lc7i and a 4 channel amp running my door speakers. Theres 2 sets of rca's. 1 set for the fronts and 1 set for the rears. How do i go about adding this eq to my setup?
The front output of the lc7i to the main input of the eq then the front, rear and sub outputs from the eq to your amps
How can i set up this amplifier for Bass and sounds on this AR Boss 4000 amp
What is it you need help with exactly?
If you're running 4 subwoofers to your amplifier be sure they are Dual 2 ohm each
What if I have a converter hooked up to my system because I have a factory radio do I just plug the EQ into the converter
The rcas from the convertor to the equalizer input rca and the equalizers output rca goes to the amps used. That way u have full control of your system from the equalizer itself
Ty hope to see new up date
Check out my new video's
How'd you wire the stereo and equalizer together? On mine, the equalizer turns off and on by a light switch lol and I can turn on the stereo and equalizer on when the key is in the off position which shouldn't happen, correct? I think that's whats draining my battery. I bought the truck with a sound system already installed
I hate installing after someone's mess. Sorry you're going through this yes you're right it's not operating under normal circumstances. Do you have experience with radio installation??? Maybe i can help u with your process
BIGJURAY20 just thought I should update you. I had no experience installing a stereo or any aftermarket audio. I did some research and pulled up the radio wiring diagram for my truck. The original harness for the radio was cut so the wiring diagram helped a lot. Basically I rewired the EQ and the stereo and fixed my problem. Battery hasn't died on me since then. And everything is turning off and on as it should :D
That's great news bro happy it all worked out for you. The fact is alot of people cut corners to get things done. But taking time and getting it done right the first time last longer in the end. Congrats bro great job. 👍🏿👍🏿👍🏿
I had a car that was the same way i had to remember to remove radios face so it wont drane my battery
Keepn it reaaal👌
No other way to do it bro
I just want to know how to connect an Equalizer to my existing car audio which connected an Amplifier? Please show the basic connection. Thanks.
Well when connecting an equalizer to an existing system you wire it as i show in the video and run the RCA to their destinated location.
So i run the amp to the eq right
man crimps and heat shrink is the way to do it man try it out no disrespect just a suggestionalso a fuse block you can get them with 1 fuse up to 4 or more the less tucked behind the unit.
Can i ask you something i have a ar 4000w Boss amp can i hook up 4 12 subwoofer with this 1 channel amplifier
Is your amp 1 ohm stable? If it is you can power 4 12 inch subs that need to be dual 2 ohm each
@@BIGJURAY20 it says 1 ohm and 4 ohm
@@tonymccoy761 It's either 1 ohm or it isn't. It will show a 4 ohm 2 ohm and 1 ohm power rating if so. That shows what the amplifier can do at those wired ohm loads
So you can put the highs and mids to one four channel amp the the signals will not be messed up?
4 channel amps have 2 separate crossovers and gains so just as long as things are set correctly shouldn't have issues
@@BIGJURAY20 thanks!
@@kcycle1308 no problem
Hey bro I just installed a clarion equalizer but for some reason it turns on when I turn the car on but it will go dim as in the first three knobs will be lit and the rest dim. Also there is no sound or signal being sent to my amp. I’m not sure if you can give any advice on this? Please try to reply asap. Thanks in advance
I don't have a kit for this can I hook them together with tape and put back in the dish
If that's what u want to do. How u have it mounted doesn't matter just as long as it's wired up correctly and playing as it should
All the fucken wires tripped me out
Any other video??
If creating a fire hazard was a video
Lol that's a good one
At the time I had this vehicle is was made for testing purposes. So I would put and pull audio equipment a lot. So yes unfortunately it didn't look the cleanest but never an issue
thank you, bro..
No problem happy to help
What kind of wire can you use to run the power and ground?? Can you use speaker wire?
Yes, you can use speaker wire to power the equalizer. Just be sure to use a fuse to protect the unit
@@BIGJURAY20 Oh okay for sure man! Thanks for the reply! And I seen you the other day on rosecrans bro that bass you got bumps HARD!!
@@FaceYourFear. Appreciate the love bro. Trying to get it together lil by lil
They sound awesome. I got a clarion equalizer I need to get installed
+Justin Fox u gonna do the install yourself bro
BIGJURAY20 yes sir. I just picked up on a trade I got a dd c5c on my speakers. I got 4 8's and 4 super tweets and the soundqubed 6.5's... I got to do door pods for all of it....
+Justin Fox that should definitely get loud
I had a Clarion EQ and was awesome men very good product for those days
I have 4 amps can this control all 4
How high do you have the volume turned up on the eq
I had my eq volume all the way turned up. I checked all distortion levels with my DD1.
@@BIGJURAY20 ok thanks I have a problem getting my sub level to play
So the rcas are in but no output
Can u hear music tuned from the EQ but just no bass??
@@BIGJURAY20 yes my highs and mids come out just fine you can hear the subs a little but I didn't have the volume on the eq turned up all the way could that be the problem
How do i do my bass on my subwoofer with this EQ and this amplifier
Whatever amplifier you're using for the subwoofer will be wired into the subwoofer inputs
what the input sensitivity for this equalizer can handle....
Doesn't say what the input sensitivity is not like Amplifiers do. Only that it puts out 8v max to the Rca
@@BIGJURAY20 Thanks for the info bro....
@@ceejaycjmusic no problem sorry I couldn't find what you were looking for
@@BIGJURAY20 no woories ✌🔉🎵
If I buy this, has it got a' line in converter ' built-in? Or, do I need to buy line in converter as well?.. I want to use my Factory Head Unit
thanks.. great vid
Dope man I'm torn between weather it's worth it to add one of these on top of an active crossover unit
It will only filter what the crossovers will allow but it shouldn't hurt to try. They are pretty reasonably priced
I have the power supply from eq connected to the head unit wires... but when i turn truck off or on there is a loud pop... anyone knows what it could be?
Try changing the ground location
Do i need a 4 c amplifier for this or can I used my 1200watt amplifier
U can tune just about any amplifier with an equalizer. You'll need a Full Range amplifier like a 4 channel to tune you mids and highs. Then, your amplifier for your subwoofer can be tuned as well
How many RCA cables did you need for that EQ and what length thinking about buying an EQ
+Edmond carter 3 17ft for mids highs and bass
BIGJURAY20 cool thanks
+Edmond carter no prob bro
Thanx for the tutorial video I been wanting to know how to hook up an eq I hook my own systems up also but I was missing the eq in my last build your video was well explained unlike other vids on here thanx a bunch!
+Randy Watson Happy i could help thank you for checking out my video. Much appreciated
It is single Boss amp 4000w
Yes i just looked up the Boss Ar 4000 watt amp and it says it's 1 ohm stable.
How did you have your CD player setup for sounds on this EQ
I don't play CD but having the audio settings on the radio all even and only using the equalizer to tune can help with Bluetooth, Auxiliary, USB and CD playing
Can you give me some ideas what kind of box I should build for my Chevy S 10 be a good idea
What do you plan to run?
Power bass amp and the has 1200 watts Subwoofers are 800 watts
@@nicholsduane3458 How many subs are you planning to run?
BIGJURAY20 I plan on running two Subwoofers
So should I run a box with a port or should I run a seal box
What dat record is
My 4 c amplifier stop working on me so can used my 2000 Watt hifonics amplifier with this EQ
Yes, you can use the equalizer for your amplifier. Whether it's for doors, Subwoofers or both you're ok
Someone just hooked up a EQ in my car and it keeps sending my amp into protect mode.. he only wired it off my sub and amp tho not ti my head unit or the factory system at all.. I’m having it taken out cause I don’t think he knows what he’s doing smh
For the eq to also be able to tune your door speakers you'll need an amplifier for them. If you only have an amplifier for the subs at the moment then the equalizer would only control the Subwoofers output
Quick question bro. How did u end up tuning it with the dd1 with the eq?? Confused atm on how to do it.
Put the sub rca in the DD1 from the eq output to test for distortion. I tested each output and crossover point to assure I didn't reach distortion
@@BIGJURAY20 thanks man u the mvp lol
I bought same eq but for some reason as soon as i plug in i get buzzing noise even when radio is at 0 val.and when i turn off from. Key i get a huge dump sound from subs any idea what it could be?
How is the unit grounded and where do u have your eq mounted?
@@BIGJURAY20 i have it grounded off same wire the radios grounded at i have it mounted right under the radio
Ground the eq itself and see if it helps any
@@BIGJURAY20 ok i just notice something i connected my eq power to the ignition power not the yellow constant power im gona try to switch that as well
Keep me posted once u get things situated.
Did your equalizer come with ground and remote wire! These equalizers don’t give out engine noises?
Don't believe the came with any wires but they did come with what's needed to get the job done. The equalizer didn't give out any engine noise very nice unit
BIGJURAY20 thanks man👍🙂
Ohh can use the same power wire from radio to connect the eq power wire?
The Eq doesn't draw much power you can use speaker wire 14 gauge ofc
How i run my 4 channel amp to my touchscreen indash to my eq
Run rca from front output from headunit to input of Eq. From eq front and rear outputs to your amplifiers front and rear rca inputs
I want to put this on my factory door speakers on my armada
Well you'd need an aftermarket amplifier to help tune with equalizers like these.
I also have a Armada mines a 09 the stock system is actually pretty loud for what it is
I was thinking to put an amp
@@BIGJURAY20 ok
@@Shane23Armada Yes it will definitely help and depending on the power applied changing the speakers could definitely help as well
Do you run a crossover in your car?
Do you have your equalizer setting all the way down on your headunit, thanks.
Everything is at the middle on the head unit
@@BIGJURAY20 any distortion at high volume from the EQ.
@@miggygains8782 No not in my case I tested for distortion at each frequency point
@@BIGJURAY20 mines does, you know what could be the problem.
@@miggygains8782 Be Sure to have you radios settings all at 0 or halfway and the eq as well.
You still active man ? I'm trying to hook up my clarion eq and for some reason only the fader is working on it? Adjustments do not work. And some how when I pull out my midbass stage rca from my crossover it still plays sound. Any clue what might cause that? I followed the steps. Tomorrow I'm gonna pull out everything and try again. Wish me luck
How do you have the rcas from head unit to equalizer
@@BIGJURAY20 I figured it out the next day. I just rewired everything and it started working. builds on pause. Just picked up 2 custom NSV4 15". Just waiting on a cell and a box
Those are badass subs u have. What kind of amp did u get to power them?
@@BIGJURAY20 starting with a 10k nemesis audio for starters probably and moving on to a b2 12.k after I save up for it. I don't want any Brazilian running for too long in my ride
@@skankhunt-jc6yx u never know the Brazilian amp may work out
Ohhhh boy😂
Do you set the gains on your amps before you equalize, or do you turn them all down on the amps and just use the equalizer?
No set the amp up first and use eq to make it sound clear
Set head unit to just before clipping then turn the 7 band eq all the way up THEN set your amp gains
@@SheikhN-bible-syndrome well said miguel
THANK YOU!!!
No prob bro
@@BIGJURAY20 Whats up bro
Hope you are good 😉
I need some advice
I have 2 pioneer 10 inch limpids which are 3 way speakers...they have a subwoofer mid and tweeter
How would I hook Em up to a preamp to control bass mid and highs 😅😱 I have no idea how to do it
Please give me some tips
@@trevinopadayachee8570 to control your midrange and midbass speaker you're gonna want them on the rear channel. And your tweeters will be on thr front. That way your speakers can be adjusted with neccessary crossover points. When using an external Equalizer such as the one used in this video. I recommend leaving all crossover points/ gains on the headunit on 0.
@@trevinopadayachee8570 Are you using a 4 channel amp to power them?
@@BIGJURAY20 but how would I do it because its one speaker with the tweeter and mid
Hey bro I need help I have a Blaupunkt CEBP870 7-Band Digital Equalizer and I have one channel amplifier and this is my stereo Model:7110GM need help how to install it I have all the wires on put can’t know where put the rear out front out because my amplifier is one channel please help thanks
How many amplifiers are you using the equalizer to tune?
Does your equalizer have a Front Rear And Subwoofer Output?
@@BIGJURAY20 I only have one in it’s one channels 2000 watts
@@BIGJURAY20 o yes it dose have that on equalizer
@@Fishing_with_Gilbert509 ok so what you'd have to do is run Rca from radios front or rear to Equalizer main input. From there you'll want to use the rca from Equalizers Subwoofer output to your amplifiers input. Be sure your radios settings are all set to 0 since you'll be using the equalizer to tune. Also be sure the equalizer is 0 on all bands or in the middle which is flat. Once your amplifiers gain and crossovers are set you can tune the rest from the equalizer
Did u use a 4 or 2 channel amp
In this video it's a 2 channel and i used y splitter rca to separate the channels. Channel 1 for tweeters/front to eq channel 2 for mids/rear to eq
Clarion the best
I've had the Clarion. They aren't much difference only the crossover points
Ik this is a dumb question but I hooked up a dsp and I hooked up the amp and dsp remote wire to the original headunit remote wire, when I turn on and off the car it’ll make a loud thump. What did I do wrong?
Try checking your grounds to see if that helps
Sometimes it happens when gains are up a little too high
@@BIGJURAY20 yea ik, but before I installed the dsp it wouldn’t make that thump?
@anthonylara3087 It could be the unit emitting that signal but it's hard to say exactly. If your grounds are all separate and the unit is mounted safely away from metal. I'm a little puzzled myself. I'll look into it a little more to see if i find a little info
@@BIGJURAY20 Alr thank you
I have a questions, I wired up my sub and amp but not bass is playing. I switched the wires around used different rca cables, my amp turns on and the fuse for the amp isn’t blown but nothing is being put out by the sub. Do you think the amp it’s self my be broken?
What amp and sub do you have??? How is it ran?
BIGJURAY20 its a crunch GPV 800 2 channel amp and a JL audio 12 w0v3, I’m not too sure how it’s ran
Does the amp go straight into protection
I have a 2 qpower 12s in a ported box on a 1000 watt Cerwin Vega hed amp do you think they need a sealed box
Having a sealed box can help give u better response with your setup. Definitely worth a try. Maybe about 1 cube + of space per sub
all depends what kind of bump you want, if you wanna wake up the town with boomy hip-hop/rap get a ported box, if you want tight punchy bass for like rock music or metal anything you want to sound clean and tight get a sealed enclosure.
I got this equalizer because I dont have a remote for my sub level so I was going to use this instead. If I'm only hooking up the sub to this how many rca cables do I need? Also no disrespect but I think you had some confusion in the blue wire connection. The blue and white wire is for the remote and the solid blue wire is if you have power antennas. I thought if your vehicle has neither u are supposed to just cap them off. The eq will turn off and on with your radio regardless through the red and yellow wires.
Wait but you got an Amp I want to install without an Amp?!
This type of equalizer is best used with Amplifiers. This model wont help tune a stock system
If your vehicle comes equipped with a stock amplifier you maybe able to use this type of equalizer to help fine tune your system
Why hook it to the front output on headunit i just tried it and didn't sound very good
Well each unit is a little different and everyone's preference is as well. Just used Front since the radio didn't interfere with the Equalizer.
Did rear output sound better for your system?
So mine don’t say cd. Is radio the same thing tho?
Your equalizer says radio on it?
@@BIGJURAY20 yes sir. I got it tho. I put it in radio
Ok yea more then likely it's letting you know to put the input in from the radio
@@BIGJURAY20 yea lol I figured. I just didn’t know what aux in was tho
The aux is only used if you wanna run a aux cord. But I'm sure your radio has it all
Sir I have a question ok on a mono amp it has 2 sets of rca outputs 1 says input & the other 1 says output ok so do you plug in the rca plugs in where it says input or output coming from the subout in the back of the eq going back to the bass mono amp i'm going to run two amps also like you have it is kind of confusing because most headunits have a sub preout in the back but I see you just have 1 set of rca plugs and they aren't running to the sub pre out you have it running from front to the cd preout in the back of the eq to the back of the radio I get that part so the sub preout on the back of the eq where does it plug in at going back to the class d/ mono amp do you plug them in in the input or the output please help not trying to be confusing I need that eq in my setup I been had it sitting around for a year help!
Randy Watson call me when u can 3109124648 id be happy to help
I went back & put the rca jacks where you said to plug them in at it's a go it's Alive it's Alive thanx so much bro them highs traveling like a symphony now you were a big help Be blessed sir preciate you!
Randy Watson no problem bro happy it all worked out for you
Hello I have a question? what subs that are right out now would you recommend that hits hard? I'm looking for four 12s
Mr. Virginia35 id recommend Audiopipe TXX BD2 12 they're affordable get loud and low as well
Look for the Audiopipe BD2 12 on Jet.Com the more u buy the cheaper they are
BIGJURAY20 can they take a lot of punishment and are they reliable? I was looking a the sundown SA subs but I'm not sure though
+Mr. Virginia35 sundown Sa sub is also a good sub. How much power are u planning to run to them
BIGJURAY20 4 to 5k
Can you take more detailed video about 7xo?
I no longer have the unit. But, what is it you would like to know?
BIGJURAY20
If i want to open max volume, What db has it distortion? 110db-115db..?
In what severity does db start to distortion?
Has it very high no distortion sound?
During testing i found little to no distortion. It still has distortion at most frequency points past half mark
jealous of that old school rockford, bet you hear that a lot. they don't make em like that anymore. and i don't just mean that style, they don't put out the quality equipment they used to.
I love the older seties amps under rated and great quality
@@BIGJURAY20 you said it my friend. I'm in the process of putting a build together for my 2010 escape, i got a alpine head unit, 4 rockford 6x8's an Orion 1500 watt mono amp and in the mail still is my Orion xtr 12 inch. a guy at work told me to look into an EQ so thats what brought me to your vid. hope it's enough to get things rattling lol.
is it worth an equalizer? if I have agency stereo
Equalizers aren't necessary only good to use if u feel you'd like to fine tune your system. There are always ways around it
I installed an EQ and it doesn't work everything is plugged in right
If yours has an Aux button, try pushing it and see if there's any output
@@BIGJURAY20 nothing I've tried it
@@nick_sometin7791 How do you have your rcas to the eq?
@@BIGJURAY20 the main in straight into the head unit, the outputs straight to my amp
@nick_ sometin yea definitely weird and you're using rcas from front/rear output of head unit
Man i thought my setup is ghetto
Lol gotta start somewhere
My current system is going to be way better. Cleaner and louder
You need to show use how to clean your music from the crossover to the eq
I'll be sure to get something going. Appreciate the love bro.
Complete trash. Living in colorado: knobs are stuck in the winter and in the 100 degree summers, the rheostats are crunchy AF. Lots of popping every time i hit an imperfection on the road or when i tap my dash.
OK SO I HAVE A KENWOOD DOUBLE DIN AN I HAVE A 6000 WATT NEMIES AMP ON 2 AMERICAN BASS XFL 12A
Hi....where did u take the 12v power supply from?
12v from the factory constant which is the yellow wire on the harness
Yo bro mine won’t cut off
How is it wired?
Where did you get your RCA cables ?
I order most my equipment from ebay
@@BIGJURAY20 could you send me a link of the stuff ?
www.down4soundshop.com/
Down4sound has a lot of audio equipment
Just about everything you'd need
U can also check out Amazon.com and Ebay
Do u thing it's possible to hook up 2 equalizer. Like one equalizer per amp? I have two amps 1 for my mids and the next one for bass.
1 is all you need. I had 3 amps running off of one equalizer. Front output for highs amp, rear output for mids amp and subwoofer output for the subs
Oh ok but u can run 2 right ?
Just wanted to no
You can run 2 equalizers but i don't feel it would change anything when a single equalizer can do what's needed in your application
@@BIGJURAY20 thank u I just wanted to no xd thanks
So it will not sound good at all I need to know before i do it
It's going to help fine tune your system if u have Amplifiers
Equalizers like these help most if u have an amplifier for your door speakers
heyo my preamp is on but I hear no sound I cheaked all my rca all are good eny tips
Only thing i can think about if u don't have any sound is maybe it's not in the right setting. Have u tried pressing the cd/aux button in.
It only has cd input no aux
Ok have u tried connecting the rcas to the back of the head unit to see if u get a signal??? You're gonna have to go through a process of elimination to find out what's causing the issue
Yes I did and I got a signal
So the deck output is good and my rca is good to could it be that the postive and negative touch in the preamp?
Terminator 10 volts 7 band this is what I have Google this
It look like a rats nest ! Sounds good !
Yea it's far from good looking. I always test different things so wired were everywhere.
@@BIGJURAY20 I was jest joking ! I like your work ! Allways !
I appreciate the love
You have the y connections hooked up wrong
What way do you think i have them hooked up???
I'm not using a 4 channel amp in this video. I used the y rcas to split my 2 channel. Running highs from one channel and mids from the other