5 Months with the AnkerMake M5C (My Experience)
ฝัง
- เผยแพร่เมื่อ 11 พ.ค. 2024
- In todays video we are looking at the AnkerMake M5C. The M5C high speed & high precision 3D printer that is beginner friendly and is offers quick and easy printing via the mobile app and an intuitive customisable one button click for your printing needs. In this one I run through my experience with this printer so far.
📚 RESOURCES
AnkerMake M5C is a 3D printer with high speed & high precision and is designed to easily customize functions in one click.
Order on Amazon: amzn.to/48cOf03
Order on Ankermake: ankermake.club/8110Vkg1
More Fun on Make it Real:makeitreal.ankermake.com/
Tri Colour Silk PLA (Used on Dragons)
amzn.to/3R77ZvX
⌚ TIMESTAMPS
0:00 - Introduction
0:22 - My 3D printing history
2:20 - Printer Advancements
3:29 - The AnkerMake M5C
4:11 - Inside the M5C Box + Assembly and Setup
8:30 - Some of my M5C prints
10:24 - What I like with the M5C
13:39 - What I don't like with the M5C
17:45 Summary
18:36 - Outro
📺 RELATED VIDEOS
- Get Started with DaVinci Resolve - Beginner's Tutorial:
🔽 CONNECT WITH ME
- Discord: / discord
- X: x.com/MarkWattTech
- Facebook: / markwatttech
- Facebook Group: / 2963936147172102
- TikTok: / markwatt94
- Instagram: / markwatttech
- Reddit: / markwatttech
- Mastodon: fosstodon.org/@MarkWattTech
🙏 REQUEST VIDEOS
forms.gle/zYpyd8gJBttYN7J17
🔔 SUBSCRIBE ON TH-cam
th-cam.com/users/markwatttech?...
🙌 SUPPORT MY CHANNEL
Hit the LIKE button in any video! You can also support me by using any of the links below!
► Become a Patreon Member:
/ markwatttech
► TH-cam Channel Member: / @markwatttech
► PayPal :
www.paypal.com/paypalme/markw...
► BuyMeACoffee:
www.buymeacoffee.com/MarkWatt...
► Ko-Fi:
ko-fi.com/markwatttech
► My Amazon Store:
www.amazon.co.uk/shop/markwat...
🎵 Track Info:
Title : All That
Composer : Benjamin Tissot
Licensed to : MarkWattTech
Available from :
www.bensound.com/royalty-free...
#AnkerMake #AnkerMakeM5C #3Dprinting #BlackFridayDeals2023 - วิทยาศาสตร์และเทคโนโลยี
![[TH] 2024 PMSL SEA W1D4 | Summer | ละเอียดทุกเม็ด เพื่อเข้าไปเก็บคะแนน](http://i.ytimg.com/vi/W6i3u5r1Vbw/mqdefault.jpg)
My boys just just got this for my birthday. Hope to start printing tomorrow. Thanks for the info!!! New sub!!!
Great video Mark. I am mulling over a printer, bizarrely, right now, and I found this really informative. I normally watch your channel for the smart home stuff, but enjoyed this one!
Thank you for the feedback :)
Good stuff! Good quality review! Subscribed! Smashed the like!
I enjoyed it, thanks, still have not dived in. You video hit my exact concerns.
Now hmmm maybe a End to End with a esp32 project, HA & 3D print.
Hi Mark. Have you had any problems with the print head or stepper motor getting jammed? I've seen some reviews mentioning it
Hey. Can you do an updated video on how to integrate eufy and wyze cameras into home assistant?
Amazing video! Would you make a video explaining how to print an object with 2 or more colors with ankermake? Tks
This printer is AMAZING!!! But I'd love to have an Ankermake 12 inch (310 mm) square bed. If it is available, I'll be first in line for it! I am a reel-to-reel recorder enthusiast, so my aim is to create 10 1/2" reels!
This is a really cool idea!!!
That fan noise is the classic sound of a cheap fan bearing failure. Mine does the same until the bearing warms up - or at least that’s what I assume is happening due to the poor bearing friction. A good quality fluid or magnetic bearing fan will get rid of the sound.
Thank you for the info. I will take a look at the fan :)
Can I change the fan for a quiter one because I might put this in my bedroom when I get it since I don't have anywhere else😅
@@Krispy367 people like Noctua fans for their silence. I don’t have any so can’t comment on how accurate that is.
@roberttco1 yeah I know noctua have great silent fans but is it possible to open up the nozzle enclosure and connect it straight away? If you will try a solution can you update me please I would really appreciate it
Hi! Great video! I'm just digging for M5C content because I am looking to get one for the holidays. Thanks for the content.
As far as the dust from the wheels, that is normal. The wheels are just wearing in. You just have to adjust the pressure on them by turning the nut. There are videos showing how to adjust them on other printers, but the same method applies to the M5C. Again, I don't have a printer. I just know this from all the damn reading I've been doing...haha.
Thanks again for the video!
Thanks for this Mark. If I literally just want an entry into 3d printing for some ESP cases and maybe a little fun with the kids (9 and 7) is there a printer or brand that you'd recommend? Was thinking I might try and pick something up second hand, but perhaps I'm better off getting a budget newer gen based on your comments?
Hey Simon. Personally I think this printer would tick all the boxes for what you are looking for. Its a simple plug and play and you will be printing in minutes. I would definitely wait for a sale though if you are thinking of this printer. I picked up an additional unit recently on sale and also got a choice of filaments with it.
As this is a newer higher end budget printer it has lots of great features that will save you a lot of headaches you will get if you just opt for a £150 printer.
Next year AnkerMake are releasing the V6 Colour engine which is an addon for this printer that will give full multicolour printing capability so could also be a great upgrade.
yes it's the Pom Wheels working into the v-channels, it will do that for a little while, but will get less and less dust, the more you use it..
Thanks for the video. Don’t get encouraged if the video doesn’t get much views at this point. It will take effort and time before plastic people will find your channel. I enjoyed it! Thanks!
Thank you :)
I had an Aquila C2 and wow I’m sure that was a horrible first impression for you. Was my first printer and while it worked well, that was when it worked and that was _very_ rare. Upgraded to a P1S only a few weeks ago and it’s night and day
Thanks Mark.
Very welcome
I'm due to get a Creality Ender 3 V3 SE next month. Never done any of this before so it's gonna be a learning curve.
You will learn a lot and enjoy printing all of the things! 😁
Time for an aqara sensor to tell you to open the window when the and turn on the vent when the printer turns on
Hi . Great 3D printer . I have a question . I want to print a mask, but its to big about 30mm . Can I divide the mask in half to print separately?
Yup. Just use 3d gloop or super glue if you don't have it.
Hey man, recently was sent one myself and that horrible sound on start up has started happening to me. Apparently I've read it's the fan in the base! They do sell replacement fans on their site though.
The notification noise was so annoying that I had to turn it off as just like you, the sound upset EVERYONE!
Thank you for sharing :)
Hi, I wanted to ask if there is a usb port to use a thumb drive? Or are you able to upload your own designs to print?
Also I really appreciate this being a genuine review. All the other ones are obviously sponsored with people saying only good things about the printer and testing it out for a couple days. This is a 5 month review talking about the pros *and* the cons and that’s very valuable
Heya. Thanks for the feedback.
There is a USB C port on the side that will allow you to store and print files from a USB C thumb drive. You can also send files from your phone and PC.
I have had mine for a month and have never dc’ed from the Wi-Fi 😮
I think this was more of an older firmware thing to be honest. Its been solid for me as of recent.
@@MarkWattTech awesome man! Been loving the printer! Some annoyances but so far its been great!
Somewhat informational BUT your pronounciation IS unbarable. PLEASE don't raise the tone of your voice at the end of every sentence as if you want to add something. Instead lower it to END your sentence accoustically as well. Drove me insane half way through and made me abort the video.