The Idea That A Plumber Told Me To Join Two Hoses Without Buying An Adapter And Without Using Glue!
ฝัง
- เผยแพร่เมื่อ 13 ม.ค. 2023
- The Idea That A Plumber Told Me To Join Two Hoses Without Buying An Adapter And Without Using Glue! Tubo de pvc
#plumber
#pipeline
#plumber
#pvc
#Water
#plumbing
#plumbing
#pipe
#plumbing
#plumbing
#tubodepvc
#works
#workfromhome
#carpentry
![[Watch Party] APL 2024 ใครชนะเข้ารอบ Hydra 🆚 Flash Wolves Talon 🆚 GGLive](http://i.ytimg.com/vi/BvuSgyLy4hA/mqdefault.jpg)
![แม่กลองสองใจ - ซีแกรม โตเกียว มิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/GSQfVjcr_f4/mqdefault.jpg)
This must win the price of the most complicated and convoluted way to solve a very simple problem. Five toolboxes later he's still gluing things.
Hahaha
I was done as soon as I seen the glue 🤣🤣🤣🤣🤣
In the first 30 days the video made $9750, and in the rest of the year it will make that much again. That is the prize he wanted to win.
Agree. The amount of time and material spent doing this could have been avoided with a simple run to Home Depot or Lowes to pick up a simple purpose-built clamp that costs about $5 and takes 60 seconds to install. Counting the time spent driving to HD/Lowes and installing it would still be a fraction of what this guy expended. And cheaper, too.
Why buy a simple joiner when you can fuck around for a few hours doing shit.
Wait! Pretty sure that the liquid you brushed on to the PVC is called adhesive. That means glue if I am correct.
Hahaha,correct someone with wrong answer hahaha
Its actually solvent it melts the plastic i.e solvent weld.
@@pheasantplucker6117 Label: "Adhesive" = glue.
It's solvent weld cement not glue most people call it glue
While it works differently than glue by actually melting the PVC together through chemical reaction, its pretty much glue.
If you're looking for the absolute hardest, mad max, end of the world scenario, do or die DIY way to do it, this is it.
Yep, that was much easier than buying an adapter and two hose clamps. And it only took me most of the afternoon!
yup, and what was that liquid that was put onto the not hose adapter that was built out of PVC that was not glue.
Lol…😂
I love the fact that comedy comes in so many forms.
I love how comedy paid $9750 so far this year, and will pay that much again over the next 11 months. Thanks.
Tengo la manguera cortada pero ahora me falta comprar la pistola para calentar pvc, la tijera para cortar pvc, el pegamento, la lija, la tenaza para cortar alambre y el alambre creo que me sale mas barato comprar la union 😂😂😂
Jajaja entiendo amigó 😂😂😂,,, si tienes una ferretería cerca la mejor opción es usar el adaptador correcto😃
Para la unión también nesecitas herramientas, te falta ingenio, además esas cosas siempre las nesecitas, claro si eres capas de arreglar cosas....
@@xiahxiah8606 bien claro su comentario amigo no sé cómo mucha gente puede vivir sin tener herramientas en casa es algo bien necesario, no es cuestión de tener toda la herramienta pero si unas cuantas lo más necesario, saludos amigo buenas noches!
@@xiahxiah8606 necesitas solo un destornillador para la abrazaderas también no manches se complican demasiado.
@@GilbertoVerges okey, pero tu comentario quedatelo para ti y no me menciones
This gives me ideas for other uses, like just spicing pvc when I don't have an adapter or if I need an unusual bend angle.
Thanks!
Well, that’s a few minutes of my life I will never get back. A $3 hose joiner from the hardware store is my preference😂
Or you could just find a bit of copper pipe that fits tightly inside the hose, warming the hose a little if necessary. You could secure it with jubilee clips, but my old dad didn't even bother. I believe that hose was still in use till the day he died.
OR you could STOP trying to avoid a way of not using a 0.50 cent hose coupler.
@@gregd6706
Tell that to my dad. He didn't spend anything he didn't have to.
Just put the ends of the hose in a cup of hot water, make them go soft and stretchy and twist them over an off-cut of copper pipe. You could secure those ends with a twist of garden wire or jubilee clips but the tension in the cooled hose is normally enough. And that guy used glue to make his adaptor!
@@MrWindermere123 Yep, re: the glue
Or buy a hose connect from shoo for 2 pound
Ira a comprar una pistola de calor y un tramo de tubo junto con una lija y alambres, ya que esto es más fácil que pedir una unión con 2 abrazaderas. Gracias a este video mi vida será más fácil.
He's probably German. The rubber bands in Germany have moving parts.
that has got to be one of the best repairs I've ever saw ,SAID NO ONE EVER
Todas estas ideas me encantan grasias Desde puerto Rico
Sugerencia: Trata de hacer videos como este pero con herramientas caseras porque la mayoría no tenemos todas las herramientas que utilizas para casos así.
Calienta el tubo plástico sobre la cocina y corta los tubos con un cuchillo.
Ficou bom. Penso que no lugar de arame poderia ser uma abracadeira
qe lo expliqe asi@@juvenanciomartin1231 y vemos como
Oh I have the tools but not the switch to shut off my brain 🧠 😂
Exactly my friend
Me falta la pistola de calor, las alicates de cortar tubos, el tubo de pvc, el Adhesivo para pvc, y el alambre también. Solo tengo la manguera. Creo que iré y compraré el adaptador que esta diseñado para eso.
Gracias
Usa la estufa
Thank you for showing us another way to fix a hose. Cheers! 🙂
I love to see people improvising. Improvising can make use of what would otherwise be waste. It's a great way to keep the mind active and think outside the box. Anyone can buy a solution, not everyone can MacGyver a solution. It's true empowerment to be able to solve problems in less than ideal circumstances. 💪👍👊♥️
First off it's not MaGyvering it when you have access to pvc cutters, a heat gun, pvc glu, a new sander disc and a beautiful workbench.
As for the waste, he wasted a good bit of pvc pipe there. If he was trying to conserve materials, why did he cut such a long piece of pipe to begin with. He cut a 10" to 12" piece when 5" would have been plenty.
Since that was obviously not a high pressure application, he also wasted the 2 pieces that he glued on the ends when he could have just roughed the pipe since he also used glue. He could have have created a bevel on the shoulders by rubbing it on a brick, concrete or even a rock.
The final piece was longer than needed for the entire project. Considering all the pipe he had leaning in the corner, I'll bet he threw away the pieces of pipe that he cut off. Even if he didn't throw them away he now has short and pretty useless pieces of pipe.
The materials he used also cost more than a coupler, so he also wasted time and money.
.
@@robertwhittington8111 My main point was that unconventional thinking is a virtue. Anyone can buy a solution. Using what you have on hand is literally what MacGyver did. He was doing a demo, not an actual repair. Hypothetically, something like this could allow someone to make a repair without a coupler on hand and use what would otherwise be waste material.
Always useful to see how to improvise when you may not have the right part.
Es más fácil calentar la manguera verde y meterle el cacho de tubo blanco que al parecer es de cpvc o PVC queda bien sellado sin necesidad de ponerle alambra o de lo contrario abrazaderas sin fin de 1/2 😊💪💪
That was a lot more elaborate than I expected. Maybe it is that much stronger than just fitting it directly to a simple piece of PVC, then seal it with a combination of heat, steel wire, etc?
i have repaired hoses with just a piece of pipe and clamps, but it did pull off after a while. i think the lip he makes on the patch piece would make a difference. there might be an easier way to do that though
Nice job on turning the simplest job into a 5 min project
More like an hour edited
The next time someone comes and cuts my hose in two, I’m going to go buy a new hose. However, it was satisfying to watch him create a hub. I did enjoy the clip.
Todo bien aunque pienso que sería mejor si se usan abrazaderas o en dado caso cinchos de plástico que alambre de amarre este con el tiempo se deteriora ya sea por humedad o por exposición a la intemperie se tuesta debilita y rompe. Mejor una abrazadera inoxidable o en su caso cinchos de plástico para mejores resultados y buena durabilidad.
I like this, no driving to the hardware store and buying a hose connector that always leaks. Stuff you can easily store and keep on hand for when you need it. Awesome!
Yea, that can of PVC glue he used will be hard and worthless within the next 12 months. That stuff never lasts more than a year. I've bought 5 new cans in the last 5 years. So, it won't "store easily"... like you stated.
great idea. However, can you please explain how one gets the free heat-gun, white plastic tubing and the PVC Cement used ! I suspect these cost way more then an adapter
Thank you very much friend, of course nothing is free, most of the things sometimes we have at home and it is very easy to make an adapter.
A new hose would be less expensive.........monetarily, and time wise!!
Is that the 'glue' (cement} he claims you don't need?? 😉
Walks next door , Takes neighbors hose, FREE.
You borrow them from next door. I just borrowed next door's hose, it was longer than mine. ;-)
Medio complicado. Yo simplemente uso el tubo y lo conecto a ambas mangueras y luego le pongo a cada una, en la unión del tubo con la manguera, una abrazadera de cremallera. En caso de necesitar separar las mangueras basta con destornillar las abrazaderas y listo.
Okay. This make sense 👌🏻 Thanks 👍🏻
I bet 100 dollars no one in this universe will ever do this!!!🖖😁
Que idea tan brillante. Como no se nos ocurrió antes. Por supuesto, compro la pistola de calentar, el tubo, la pega y la lija por unos $300 dólares, en ves de comprarme el adaptador metálico por 3$. Que bárbaro
Jajaja
Si le colocas dos abrazaderas se verían más bonito el trabajo
muy desprolijo todo
Thanks for sharing that's interesting very creative l would love that.
Pretty cool repair for emergency use.
Yo he cortado un tubo de cortina y conecto la dos manguera, sin pegamentos ni abrazadera queda ajustado. Aquí aprendemos todos .. gracias
muy bueno, pero compraria una adaptardor. y dos abrazaderas.
Muchas gracias amigo
And here I was thinking that I was the only one thinking OMG what are you doing? LOL
Love the comments. Pure gold.
This is how I been making drip line connections for years. I use 1/2 inch pex. It fits perfectly without having to bell the ends.
I use 1/2 pex rings to hold a new end on instead of a hose clamp works great just get a 1/2 ring or a piece of 1/2 pex expand it with usually a 3/4 nose slip over the hose add the end slide the ring over the end and let it shrink back haven't had one leak yet I also use copper pex rings to fix air hose instead of a hose clamp works great and no snagging a stupid hose clamp on stuff 👍👍👍
@@umahunter what do you use the 1/2 inch pex rings to repair? I mean what kind of hose will it fit over?
@@billwilliams9897 I've used half inch plastic PEX ring typically used to hold fittings into 1/2 PEX pipe to hold on new ends on garden hose instead of using a metal hose clamp I take 1/2 ring and stretch it large enough to fit over a garden hose usually the 3/4 nose on a Milwaukee PEX tool will stretch the ring large enough to slide over a garden hose stretch the PEX slide over garden hose push the male or female hose end into the garden hose and then slide the PEX ring up and let it shrink I usually start with the 1/2 inch nose expand the ring and slide it over a 3/4 nose then screw that nose onto the PEX tool and expand it large enough to fit over the hose then put the end into the hose and let shrink I wasn't sure if it'd be able to stretch that far without tearing the plastic since it's stretching a bit more than a 1/2 to 1/2 connection but its worked fine on the hoses I've repaired now for the air lines I've used the different style that uses a solid copper ring and crimp tool I'd have to look but I think it was a 1/2 ring over a 3/8 air hose slide the ring over the hose push the barb into the hose then work the 1/2 ring up into place it's a pretty tite fit so it takes a lil force to get the ring up into place then crimp with the tool I've had them on for a couple years and it's still holding fine without any air leak
@@billwilliams9897 I just looked up the post and on the air lines I used Apollo 1/2 pro crimp rings over 3/8 id line that is about 1/2 od hose
Talking about bellends! Perfect description!
En casa de Sanitarios venden una conexión que se llama "enchufe-enchufe".
Vale 10 centavos de dólar.
Muy buena idea muy muy buena.,🖐🇩🇴🇩🇴🇩🇴🇩🇴🇩🇴💫💫💫💫💫.
Lol, I love these vids. That’s way easier then buying an adaptor.
Iba a comprar una espiga de 2 pesos, pero como estaba de vacaciones y tenia 2 semanas libres y algo de dinero, me compré una pistola de calor y usé mis vacaciones para unir ésta manguera, en mis próximas vacaciones la probaré para comprobar los resultados! Saludos!
Jajajaja
Jajajajajajjajajajajjaja
Espero que te funcione, te lo digo enserio 😂😂😂
😆😆😆Tal cuál!
I thought that it said no glue in the video description but, there is PVC cement being used. Other than that great idea.
Really useful video - I now know that if I need to join two hoses I should go to the store and buy the cheap and quick hose connector!!
Just get a new hose.
Exelente idea, así el tubo no corre el riesgo de salirse de la manguera
I did this and it worked perfectly 😊
Unfortunately I didn’t have any pvc pipe, pipe cutter, glue or a heat gun so had to go out and buy them.
same here, only I just went out and bought a hose splice set instead.
Yo creo que comprar el aparato que venden es más fácil y rápido no todos tienen una pistola de calor
I could drive to my hardware store, pick up the coupler, head home, fix pipe, grill a steak and have a beer in the time it took to do this fix 😆
We always use a piece of copper tube, quick and easy and a lot less messing around!
Copper or PVC an two hose clamps...done! Those twisted wires are going to cut someone or tear up cushions on the patio furniture.
Why do so many people assume that we all have copper pipe laying around, and the tools to cut it? I happen to, but not everyone does...
I have to get one of those copper vines for my garden!
"SIN USAR PEGAMENTO", eso quiere decir que yo vi mal, porque me pareció que si uso "PEGAMENTO"
In a survival situation... I was impressed
Perfect ha ha! Why not use the bits we have lying around? Always love to see pvc pipe mould with heat! If nothing else these vids inspire us to sort out leaky hoses!
Great idea! I would put heavy duty zip ties and tighten with zip tie gun for less chance of snagging on anything.
Thank you very much friend, good idea I will try to get some metal ties and place them to have more security, I did not use it because I did not have it but your idea is very good thank you!
Heavy duty zip ties and the pullers would be nice but personally hose clamp would be best and for a quick fix the bailing wire he used is perfect but zip ties I use in hvac industry on flex is what your talking about personally want last as long as hose clamp
@@Hvactech89 Ah yes I understand, now that I go out to the city I buy them, I only did this as temporary,,, thank you very much
Prefiero comprar el adaptador que me cuesta entre 7 y 10 pesos y dos abrazaderas que me salen entre 5 a 7 pesos cada una aparte siempre acostumbro a tener reservas en todo lo que se refiere a plomería uno nunca sabe cuándo las puede llegar a usar
I gave this guy a thumbs up just because he didn't delete the smartest comment on the video about the 30 cent adapter. This is a real channel, 95 percents of other channels delete intelligent comments!
Lotta critics here. I'll take any knowledge and practical applications as I can!! Much appreciation for another's ingenuity. These techniques are usable far beyond this demonstration. Anyone who shows me anything is nothing but a positive in my life.. God be with you. Peace
Empecé a ver el video y mi esposa me dijo "¿sí vale la pena ver eso?". Cuatro minutos después me doy cuenta de que ella es una buena consejera.
Por supuesto que resulta más fácil una unión,
Pero acá estamos hablando de algo casero y también efectiva, en el caso de que no disponemos de lo ya obvio.
exacto muy buen comentario muchas graciosa por entender
Hay lugares donde no se vive cerca de una ferreteria pero si hay mucho material que sobro de otros proyectos.
una pistola de calor y esa herramienta para cortar no es muy casero q digamos de 20 persona una con mucha suerte tendran esas herramientas...
@@silviog4715 O no tienes una mentalidad apropiada para hacer este tipo de arreglos o solo te gusta argumentar. Yo con un cuchillo o una cierrita y una fogata te hago la misma cosa. No necesitas nada especial excepto un buen cerebro. Por favor, Silvio!
@@Esuper1 lo q quiero decir es q no todos tienen ese caño de electricidad en casa.. en el video se vende como algo facil y rapido.. comprar una espiga q no es cara en ninguna parte es mas facil y rapido . ahora si contas con ese caño por q t dedicas a la electricidad o cualquier motivo q sea es una buena opcion..yo tambien se q con una sierra se puede cortar..
Thanks ; I think I'll buy the adapter.
Nice idea it will get out of jam some day
Que casualidad! Hoy arreglé la manguera así :tenía un tubo de metal para colgar cortinas corté un pedacito uní los extremos y lo envolví con una cinta que corté de goma de ruedas de bicicleta y santo remedio ! Esta señora lo arregló así porque mis plantas no pueden esperar .Abrazo desde la Patagónica Argentina mucho calor está haciendo
Wow que bien Roberto, saludos cordiales!
A cuantos grados centigrados?
Para facilitar el flujo del agua , tal vez sea aconsejable formar avellanados ( conos ) en el diametro interior , por ambos extremos del adaptador y por estetica , en vez de usar alambre , instalaria amarras plasticas , saludos ..
Muchas gracias por la información amigo, saludos cordiales 🤝
Wow a saw to pull out plants as I drag it through my garden.
That is an interesting method. I love these outside of the box ideas. Thank you for sharing the knowledge.
No adaptor and no glue as it says in the title. Just use a bit of 1/2” pipe that we all have hanging around and is pva adhesive not glue?
oh yeah sorry buddy i used a little
Mejor resulta poner una unión o un neplo como decimos en mi país y listo, ahorro tiempo y trabajo.
Is this supposed to be funny? Because I thought it was hilarious. Thumbs up from me. The added wire at the end was the cherry on top.
Just admit is, your Plumber is screwing with you. LMAO
Si no tenés PVC en casa, hay que comprar una unión... No creo que todos tengan un pedazo de PVC por las dudas se rompe una manguera
Yo usé un pedacito de tubo de cobre y no le hice los rebordes y le puse abrazaderas comerciales de apretar pero liqueaba....la solución final fue pegar la Unión de cobre a la manguera con pegaloca (crazy glue) ....👍
what a job...for a couple dollars you can buy a small joiner besides I have joined hoses by heating one end and sliding it into the the narrower end , yes I used some pvc glue too.
The plumber that showed you this is laughing his assss off right now😆🤣😂😂🤣😭
Great idea, and simple too! Have u ever thought of using super glue and baking soda to seal and secure then the wire behind that as to make a barb/lip so no chance of slipping past the wire? Just a thought, but u definitely did a great job!
Thank you very much my friend and thanks for the ideas you gave me have a good day
@@Mrinventor93 then when move your hand over the splice point you rip hand open on exposed wire you used….good idea but mission not completed
Creo que sale mucho más barato y es más rápido comprar el cople jeje
Good idea❤
Thanks
At the end I just thought YESSSS!!!!!!!!
dice sin pegamento y es lo segundo que usa
Es más fácil conseguir el cople, que el cemento para pegar el tubo la secadora las pinzas el alambre y el pedazo de tubo , pero creo no es usar la inteligencia, porque era solo calentar muy poco la manguera y meter al tubo y listo. Una disculpa por la crítica pero no pude evitarlo.
Nicolas Aguirre, cuando se le insertaron los tubos de PCV, pense lo mismo que ud le pongo calor y no hay necesidad de amarrar con alambre. A mi me gusta hacer plomeria en mi casa y me parecio muy buena la idea. Me fascino la cortadora de PVC pero no he visto eso aqui en RD. Al leer los comentarios me justifique diciendome que por eso recojo esos recortes que los vecinos botan.JJJJeee.!!!!!
Me gustó mucho, su arreglo! 🏆. (Molesta la música. Muy fuerte. Hiere al oído.)
Got to admit, it can be done. And I watched the moving picture show from start to..some point near the end. Now I want popcorn.
No es necesario agrandar el tubo de cpvc con la pieza en el estado original es suficiente ya que le vas a poner alambre
Si solo lo hice para mejor seguridad y no se vaya a botar, muchas gracias amigó 🤝
De la otra forma resbala .muy buena idea .
No tiene ninguna gracia el arreglo. No Es necesario agrandar mete el tubo tal como está .comprate una copla y listo fome!
Gracias por la información, me funciono muy bien así Roberto gracias
If you are 20 miles from the nearest hardware store and your vehicle gets 12 miles to the gallon, this makes sense.
Awesome...now I can cut my hands on the wire knots everytime I roll the hose...
I just bought a hose that is longer than I needed just to make sure I had plenty.
Save’s trying to join one.
Great video. I need to mend my hose, came here to see how. I'm heading to the store now. Let's see, I need PVC, PVC glue, a heat gun and some wire. Thanks...
thanks for sharing.
Proceeds to use glue and make an adapter 😂 clever idea though!
I had to go to the hardware store to buy some pvc pipe ,glue and wire ,borrowed a heat gun and took the afternoon off work ,but saved myself 4 bucks on a joiner HAPPY DAYS
It's a miracle!
Perfect for those who have a lot of time on their hands.
I'll go buy the adapter, I will have saved way more time.
No glue was used in the making of this highly complicated, glued joint! ;-))...
Once I had same predicament to join two flexible hose pipes. I had a small piece of half inch dia steel pipe, cut piece of a curtain rod. I slipped its two ends on the two flexible hose pipes and secured them with hose clip.
Clever idea
"without using glue" in the title. uses contact cement(glue) while making the adapter anyway
What a brilliant idea would of never thought of doing it that way not
Thanks ☺️
this guy lives a good days drive from Bunnings
Ingenious example of working with pvc pipe. Learned something. Thanks
With all time and material needed for this , it's fair to say that buying an adapter it's a better option .