ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Festool KSC 60 Cordless Kapex Miter Saw Review

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 ส.ค. 2024
  • Review of the Festool's new cordless Kapex KSC 60 cordless miter saw
    toolcurve.com
    Festool Hose Adapters
    toolcurve.com/...
    Hose Clips
    27mm - toolcurve.com/...
    36mm - toolcurve.com/...

ความคิดเห็น • 85

  • @idog1911
    @idog1911 11 หลายเดือนก่อน +25

    I was a little worried about installing the blade after reading a couple of reviews. But it was amazingly easy. Took about 1 minute. Works great th-cam.com/users/postUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c . Cuts easily and is perfect for pocket cuts I needed to make for replacing some old deck boards.

  • @matt800m6
    @matt800m6 ปีที่แล้ว +6

    For a 1000 dollar saw they should have incorporated the bevel feature from the 120

  • @danthechippie4439
    @danthechippie4439 ปีที่แล้ว +3

    The saw can work with one battery.
    I'd say the verable speed colour chart on the saw matches the colour saw blade in the saw. For example your saw has a yellow saw blade, so set the speed that matches it on the chart

  • @curnowornever
    @curnowornever ปีที่แล้ว

    Bosch 12” cordless pro factor compound miter saw has a variable speed motor. There are 4 different speeds, the slowest being “eco mode” with a no load speed of 2550 rpm. Mode 1 is 3000 rpm, mode 2 is 3500 rpm, and mode 3 is 4000 rpm. It’s a great saw but love to see this Festool saw in person.
    Great review, thank you!

  • @AlexChinovnikov
    @AlexChinovnikov ปีที่แล้ว +1

    Это невероятно крутой инструмент!
    Очень рад, что у вас есть возможность одним из первых его тестировать))

  • @joshedwards7301
    @joshedwards7301 ปีที่แล้ว +1

    Where did you order this from ? I can’t get anyone to export this to n America .

  • @eyeofamon
    @eyeofamon ปีที่แล้ว

    Comes with a hold down clamp or no? If no, does the 120's work?

  • @HarveyJohnWillmott
    @HarveyJohnWillmott 9 หลายเดือนก่อน

    Have you tried the corded version? Is there a difference in power?

  • @Paul-1123-
    @Paul-1123- ปีที่แล้ว

    How about the depth of cut and width of material?

  • @chuehueyang143
    @chuehueyang143 ปีที่แล้ว +4

    How's this saw compared to the 8 1/2" Makita XGT?! I'm debating which saw to get.

    • @dvntsmh
      @dvntsmh ปีที่แล้ว +4

      @@toolcurve could you do a comparison video? 👀👀

    • @andreinvictoria
      @andreinvictoria ปีที่แล้ว +2

      @@toolcurve
      How do they compare in bevel accuracy and deflection?
      Also what is the weight difference with batteries?

    • @bigboundsy
      @bigboundsy ปีที่แล้ว +1

      I had the 40v makita since it came out in the uk, it’s a great saw, I was using a dewalt 54v extractor as it was the only battery m class available at the time, I swapped that for the new 36v festool m class so it only made sense to get the kapex and plunge saw!!!! Can’t wait for delivery on Monday!!!!

    • @histguy101
      @histguy101 ปีที่แล้ว +1

      Probably a greater cut capacity on the Makita. You can also get the Makita with a 4ah 40v battery and charger for about 2/3rds the price of this.
      The Makita is a bit heavy for its size, imo

    • @bigboundsy
      @bigboundsy ปีที่แล้ว +1

      @@histguy101 I paid £929 yesterday for the festool with 2 5.2ah batteries. The same deal for the makita 40v with 2 4.ah batteries is currently £846 cheapest I can find. They both have the same blade in them so cut depth is the same

  • @dvntsmh
    @dvntsmh 9 หลายเดือนก่อน

    Hey I made an order for your bosch lr32 plate, Was trying to get info on the status of my order but I have recieved no email reponse, if you all arent running can I get a refund?

  • @alexanderrozumowski5180
    @alexanderrozumowski5180 3 หลายเดือนก่อน

    What is the difference between KAPEX KSC 60 EB 5,0 I-UG-SET and 5,2 I-UG-SET?

    • @BuckRogers2491
      @BuckRogers2491 3 หลายเดือนก่อน

      Where are you seeing those? 5.0 and 5.2 would normally refer to the batteries. UG is likely the UG cart. I'm not seeing any reference to a saw + battery + cart combo. Saw + batteries + charger + systainer, yes.

  • @chuehueyang143
    @chuehueyang143 ปีที่แล้ว +2

    I think it does run on just 1 battery, but at lower capacity....

    • @dvntsmh
      @dvntsmh ปีที่แล้ว

      @@toolcurve did you try from both ports? It should only work from a certain port.

    • @markjarman7819
      @markjarman7819 ปีที่แล้ว

      @@toolcurve yes it does work only on one battery but at half the power. Try the other port. Great looking saw.

  • @Fickl3
    @Fickl3 ปีที่แล้ว

    Makita GSL02Z goes 4,800 RPM and is this saws closest competition. Personally I prefer the Makita and couldn’t justify the $300+ premium for the Festool.

  • @bret9741
    @bret9741 ปีที่แล้ว

    Thank you for the info. I just wish 3 things… (1) change handle to horizontal (like Dewalt) (2) make slide (length of cut) longer… ) (3) 10” blade.

    • @jakebirkmaier5703
      @jakebirkmaier5703 ปีที่แล้ว +3

      Have you ever used the vertical handle? It seems vastly superior to me as it doesn’t move the blade as much as horizontal.

  • @XxMalabooo
    @XxMalabooo 9 หลายเดือนก่อน

    Now that you have this for a period of time; is it this or the makita? Still happy with it?

  • @southhillfarm2795
    @southhillfarm2795 ปีที่แล้ว +3

    Still waiting for a Festool cordless trim router. So surprised they don’t make one yet.

    • @mdlyonn0035
      @mdlyonn0035 ปีที่แล้ว +2

      They need to make a cordless planer aswell, one of the only things stopping me from going fully to Festool

    • @ianperkins7831
      @ianperkins7831 ปีที่แล้ว

      They need a cordless planer in there armoury... So frustrating..

    • @jessejohnson1557
      @jessejohnson1557 ปีที่แล้ว

      Agreed on both the trimmer and planer, looking forward to the reciprocating saw but they’re still lacking which has led to me having to get a 2nd system aswell

  • @rickyperkins232
    @rickyperkins232 ปีที่แล้ว

    Can the CAS batteries work in this saw?

  • @GBMusicCompany
    @GBMusicCompany 9 หลายเดือนก่อน

    Mine won’t hold at the 30 degree bevel tilted to the left , I crank it all the way down as tight as I can but the weight of the batteries(I think) won’t let it hold there , any one else’s having this issue ?
    Other than that I’m loving it

  • @snowylucky2000
    @snowylucky2000 ปีที่แล้ว

    Can this tool cut 4x4 wood

  • @craigjoint2615
    @craigjoint2615 ปีที่แล้ว

    Bevel it over to the right and do cut video ?

  • @andreinvictoria
    @andreinvictoria ปีที่แล้ว +1

    You should do a head to head with the Makita

  • @ron1martens
    @ron1martens ปีที่แล้ว +1

    I have the older kapex 120. I found it difficult what you said early in the video regarding the older kapex had motor issues? The motor on my kapex has been fine. Although I find the accuracy on tilt cuts not as good as I want them to be. Going by the price on the 60 kapex here in Australia is around 30% more expensive than the saw I bought. My saw cost around $1,600 whereas the kapex 60 cost around $2,500 that's in Aud.
    Australian currency.

    • @BuckRogers2491
      @BuckRogers2491 ปีที่แล้ว

      IIRC, it was 2019 and prior Kapex 120 that could have motor problems. From what I remember, Festool warrantied those.

    • @ron1martens
      @ron1martens ปีที่แล้ว

      @@toolcurve Sorry for the late reply as I seen the notification just now. When you mention issues in USA, Could it have been because your volts are low at 110 volts ? In Australia the voltage is 240. Thanks for the reply.

    • @alexdoey6931
      @alexdoey6931 ปีที่แล้ว

      @@toolcurve I can confirm. The motor on my Festool saw died right after the warranty expired. To repair the saw it cost $600 and having to haul it myself to Indiana instead of shipping it which was too expensive because! not covered by warranty. They should have WAY more service centers across US. I used the saw once after I fixed it then got it stolen from me. New Festool saw runs fine though. The motor was their fault but never admitted or made amends. Who is the sucker? This saw definitely should have the bevel lever in the front for this price. Don’t buy Festool unless you have a passion for tools 2 or three time the price of other brands. The only tools worth it for carpentry are the dominos and the rotex sander. Even the track saw can be challenged by Makita. And don’t get me started on the tracks for the saw or the cover bag, which makita is more padded and cheaper. And that’s just one small example.

    • @keithmulhall4900
      @keithmulhall4900 8 หลายเดือนก่อน

      @@toolcurve The issue is also in the UK and Ireland once on 110 volt connected to 3kva transformers.

  • @2ifXC
    @2ifXC ปีที่แล้ว +1

    Can you set depth of cut for trenching cuts?

  • @deano657
    @deano657 ปีที่แล้ว +1

    Great saw I just wish that the extra safety button could be cut off 👀

  • @deano657
    @deano657 ปีที่แล้ว +1

    Does anyone know of a fix for the annoying safety button that's near impossible to press on mitred cuts 😭

    • @bigboundsy
      @bigboundsy ปีที่แล้ว +1

      Glue it in!!!

    • @mrdan1210
      @mrdan1210 ปีที่แล้ว

      I hate it, was considering returning it based on that switch. Complete afterthought!

  • @spilleradam
    @spilleradam ปีที่แล้ว

    I like festool, but I don’t like the switch on the mitre saws, I’ve used the Kapex 120 it’s a good saw but don’t like the switch, it just feels awkward it feels like your hand is high up , I prefer the design makita .

  • @histguy101
    @histguy101 ปีที่แล้ว

    Hikoki has Bluetooth batteries to make all older tools compatible with their aws/Bluetooth vacuums. They're only available in Europe, Asia, Pacific though.
    Makita, instead of having a Bluetooth battery, has a Bluetooth adapter that goes in the battery slot, and the battery goes onto the adapter, making all older tools(XGT 40v only, I believe) compatible with their aws/bluetooth vacuums.

    • @Katalyst-K
      @Katalyst-K ปีที่แล้ว

      Isn't the hikoki Bluetooth only for 18v? I haven't seen any with the 36v tools yet

    • @histguy101
      @histguy101 ปีที่แล้ว

      @@Katalyst-K only 36v. They tie tools into the rp3608db bluetooth vacuum(and also a corded version) or they connect to the app to adjust settings on certain tools like the newer impact driver, impact wrench, and drill driver.

  • @ibitaRaptor
    @ibitaRaptor 8 หลายเดือนก่อน

    You can run on 1 battery but on half speed/power.

  • @crystalatornz8935
    @crystalatornz8935 ปีที่แล้ว

    Hi. I am your 1000th subscriber😀

  • @CrookedSkew
    @CrookedSkew ปีที่แล้ว

    Thanks - solid video.

  • @andygrayson7485
    @andygrayson7485 ปีที่แล้ว

    good review 👍👍👍

  • @slicktype001
    @slicktype001 ปีที่แล้ว

    What will the cost be in the U.S? and what size blade does this take?

    • @histguy101
      @histguy101 ปีที่แล้ว +1

      8.5"/216mm blade, thick kerf. And with a 30mm arbor. Standard 8.5" blades in the US won't fit it, but I believe Freud Industrial makes some that do.

  • @svtrader
    @svtrader 8 หลายเดือนก่อน

    Hey man, this or the Makita 40v XGT 8 1/2"?

    • @jeffpower6473
      @jeffpower6473 5 หลายเดือนก่อน

      I second this question. I’m trying to decide between both

  • @DaileyWoodworks
    @DaileyWoodworks ปีที่แล้ว +1

    Thanks for the review. I really want this saw or hope Makita releases a 36v version of their 40v 8” saw.
    Totally agree with you on the Makita AWS system being dumb. Putting the BT in battery makes more sense.
    As a lefty that new button safety is just stupid. That will get removed day one with me

    • @histguy101
      @histguy101 ปีที่แล้ว +1

      But not all batteries are Bluetooth, so you would then have to buy Bluetooth batteries, and they cost more.

    • @AaronGeller
      @AaronGeller ปีที่แล้ว

      Now that it’s coming to the US, think you might buy it?

  • @sawdustwoodchips
    @sawdustwoodchips 5 หลายเดือนก่อน

    The saw will run with one battery, but reduced power

  • @crashkg
    @crashkg ปีที่แล้ว

    Does it have lasers?

  • @noelflores2278
    @noelflores2278 ปีที่แล้ว

    how much is the price?

  • @pault1964
    @pault1964 ปีที่แล้ว

    Needed for cutting aluminium

  • @nickcaravella3575
    @nickcaravella3575 ปีที่แล้ว

    Are you based in the u.s

  • @vasilyvasilevsky7709
    @vasilyvasilevsky7709 ปีที่แล้ว

    Какой смысл в аккумуляторной торцовке? Вы её , что таскать собираетесь? Это не шуруповерт! Это стационарный станок ! Только лишние расходы.

    • @agent7agent759
      @agent7agent759 ปีที่แล้ว

      Иногда новостройки не имеют электричества и приходится работать с акамуляторами , у меня 80% инструменты на акамуляторах, и очень долго можно ими работать без зарядки, но торцовочную пилу я купил от makita 308 mm отличная пила с 40 вольтным акамулятором