Gobi Ladder Install - Toyota 4Runner
ฝัง
- เผยแพร่เมื่อ 3 พ.ค. 2023
- ► Buy me a coffee if I helped you with this video! www.buymeacoffee.com/phorunner
► Support this channel by buying some 4Runner Merch! teespring.com/stores/phorunner
Parts:
Gobi Ladder (Driver Side) gobiracks.com/product/toyota-...
Tools:
Anti Seize amzn.to/3HIqphE
1/2" Deep Socket (or open end wrench)
7/16" Open Wrench
Tape Measure
Masking Tape
Level
Rubbing Alcohol + Microfiber Rag
#gobi #wadder
Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use or unauthorized modifications of this information. I assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not me. Enjoy my videos.
As an Amazon Associate, I earn a small commission from qualifying purchases. This cost you nothing and helps support my channel! Thanks! - ยานยนต์และพาหนะ
I’m ready for that timing belt replacement video 😎
Check out Timmy’s video haha. I’m not quite ready to do one yet lol even though I need to ;)
Good install ! Simple to follow.
Thx
Great video I just ordered mine a few days ago as well
Nice quality ladder
Very nice.
I’m digging it
Thanks for the informative content buddy.keep up the fantastic work. I am on the verge of reaching out for an LED lighting review, but I didn’t find an available contact way,so i write here.Are you open to doing a review for LED lighting?
Interesting it has sticky tape for the top would love a long term review on how well the glue holds up in hot Temps @PhoRunner Channel
I just stumbled across your channle looking at gobbie ladder and man Nice 4runner!!!!
Thanks!
@PhoRunner Channel what part of Cali u from if u don't kind me asking? I'm from the bay but move to tracy area
I’m in Fresno
very good! excellent. It's a pity that they don't ship to my country, because I should make it at home. Do you have measurements or plans of the stairs? especially of the upper and lower anchors. thank you!
I don’t.. sorry
I'm a barn painter from Wisconsin my friend and I've got to have a ladder on the back of my 96 Toyota 4Runner
Nice it’s nice and study
About to start workin on my own sleeping platform to go camping next month because of your design ;) Im also really curious about the antenna on the rear left side. I think it looks cool and i want to know what it is so i can get myself one
It’s a cb radio antenna
I got my driver side Gobi for my 2002 runner. I ordered it in November 21 and got it 6 months later, in April 2022.
Worth the wait??
Totally! I received a follow-up message indicating it would take 6 months, and it took that long almost to the day. I've attached a Krazy Beaver 🦫 shovel and a fire extinguisher to the side rails of the ladder, so it freed up a little space in the cargo area.
Awesome man! Looks great. Thanks for the video. I have almost the same 4runner as you. One thing I love about them is the lack of blind spots and visibility. Does it block much when looking our your rearview mirror?
I havent really noticed it to be honest
@@PhoRunner thank you buddy!!
Do you have a installation video for the rear antenna mod? tyvm learning a lot from your videos I appreciate it!
I don’t! It’s just an aftermarket bracket a local shop made for me but many options available. Google cb radio antenna bracket 3rd gen 4runner and a few will show up. You run the wire similar to my dashcam (easier) so check that video out.
The never-ending comments about you selling your 4Runner because of the April Fools video you made a year ago 😂😂😂
Lol
muy bueno! excelente. lastima que a mi pais no hacen envios, por que que deberia fabricarlso en forma casera. tendras medidas o planos de la escalera? sobre todo de los anclajes superior e inferior. gracias!
Gracias
A little off topic...I'm looking to replace the pads and rotors on my 21 TRD OR...any recommendations? Thanks.
I don’t have any recommendations for that.
Did you get your 4runner back?
It never left me! Did you watch that entire video????
Lol, April fooled!
Lol
Another excellent excellent video. Thanks for sharing
You didn't get on it and climb and demonstrate it? That's the first thing I would have done I mean why else did you buy it? Thanks brother your videos are helpful because I've got a 96 4Runner I picked up for 2,100 bucks it needs a lot of work
Can u run this with your tow hitch tire carrier? Or does it interfere?
It does interfere unfortunately
Is the ladder drilled on at all?
No drilling at all
Bro you know anyone selling a 3rd generation 4runner around here in the valley that you personally know?
I don’t…
@@PhoRunner thanks for responding, someone is selling a 3rd gen SR5 with 300k for 9k, do you think that’s too steep or a fair deal ?
That’s dumb haha… let them keep it lol
Hello I have a question.im in need of some help here.i have 98 4runner 4cyl.haveing some issues with it..I noticed it swerve side to side while going 30 to 40mph..already replace upper and lower ball joints changed upper and lower control arm bushing,outer tie rods also rack bushings and the problem is still there can any one give me any idea of what's cause it to swerve side to side please..😢
Is it aligned?
@@PhoRunneryes already got it aligned but the problems seems to be there..does the sway bar links has to do something with the swerve side to side?..
The sway bar won’t do that.
@@PhoRunner could it be front struts?..
Check the wheel bearing for play. I’m not too sure why it would swerve side to side :(
Didn’t u sell your runner??
Nopeeee
@@PhoRunner I need to learn how to install a hot usb charger for the camper shell
Tacoma?
@@PhoRunner yea