Just used this video too put bearings in two new TRX4M's, thank you so much for the video, and I also appreciate you just jumping in and going for it, relieves some of my anxiety of tearing two new trucks apart!
Nobody’s mentioned this,but my two day old trx4m has stripped ring gear in the rear diff. I called traxxas and they will replace them under warranty with more nylon gears but it’s just going to do it again. I ordered metal gears,hopefully they will last a little longer.
I have bought 2 bearing kits already and just got the bronco. and probably will get this set too. nice, paced explanation, I have built about 20 kits in cars and helicopters and always like added information in a non annoying presentation, which you have here.
My 1.5 does not fit properly into the 2 screws at the end of the axles. I even tried the alien wrench supplied by Traxxas and it still spins freely. Very frustrating, not sure what to do now.
This is why I got so far with mine and then sold it. I was unimpressed with the plastic everything and bushings. We are too far along with products for this type of bs from manufacturers. The truck was ok stock ,just needed weight and better tires for crawling but it was a slab walker out of the box if you prepped the tires first. Imho it's not worth 150. Mabe 75 bucks. I had 400 into mine and it was ok....didnt really reflect what was put in it.
Hard to find the time these days. I still enjoy making them when I can
you ever think of doing a 5th scale build again? i cant tell you how much the baja sc build series helped me! =) thank you for everything you do man!
Just used this video too put bearings in two new TRX4M's, thank you so much for the video, and I also appreciate you just jumping in and going for it, relieves some of my anxiety of tearing two new trucks apart!
My servo gear broke up after three hours, I replaced it with the Traxxas metal gear and it works fine
Dude, so glad to still see some videos popping up on here
Nobody’s mentioned this,but my two day old trx4m has stripped ring gear in the rear diff. I called traxxas and they will replace them under warranty with more nylon gears but it’s just going to do it again. I ordered metal gears,hopefully they will last a little longer.
Thanks for the video, I learned a lot
VERY VERY useful clip. I really appreciate you took the time to do this. It really helps the newbies to get around these little beast. Thanks a lot!
How did u get the stripped screw out I’m having the same problem?
The CA glue will harden the plastic and possibly break it
I have bought 2 bearing kits already and just got the bronco. and probably will get this set too. nice, paced explanation, I have built about 20 kits in cars and helicopters and always like added information in a non annoying presentation, which you have here.
Does this video work on the high country ford version?
Super glad you started with the Trx4m in your return! Helped me out so much for a first timer
Thank you so much for your time and patience to go through the whole proccess, much appreciated! 😊
Well done! Subscribed.
Don’t forget to grease your gears
Thank you for taking the time to show us how to do it !!
The guy sounds asleep.
My 1.5 does not fit properly into the 2 screws at the end of the axles. I even tried the alien wrench supplied by Traxxas and it still spins freely. Very frustrating, not sure what to do now.
45:29 of course your snaps right together no problem. I wonder what I’m doing wrong.
Upon install I found my low range transmission I bought to replace the stock unit had bearings pre installed.
This is why I got so far with mine and then sold it. I was unimpressed with the plastic everything and bushings. We are too far along with products for this type of bs from manufacturers. The truck was ok stock ,just needed weight and better tires for crawling but it was a slab walker out of the box if you prepped the tires first. Imho it's not worth 150. Mabe 75 bucks. I had 400 into mine and it was ok....didnt really reflect what was put in it.
Just run it the way it comes don't waste money on unnecessary items
I love your bearing kits it’s the only bearing kit I use
The noise gate on your microphone is set a little too high.
Are the bearing water tight sealed?
How did u get the stripped screw out I’m having the same problem?
Hello, did you get the screw out yet. I have the same problem.
Thank you for this!
It s better than stock?
You forgot to grease the gears just saying
You know some time stamps would be invaluable so I don't need to watch a 50 minute clip for one bearing
You mean “Trucksus.”