I bought that adapters about a year ago because I hated changing ball joints and boy are you right its a game changer. Really wish they came with a case or something.
I got mine for $35 on Amazon, next day delivery too fortunately. I installed them crooked when doing it with the standard press fittings and it made me irritated so I caved in and got the good kit. I’d be paying a mechanic way more than $35 to put them in (not that I’d ever have that in the question anyways) so no harm no foul
I ordered this kit and used it with great succes but I purchased dirt cheap ball joints for my 94 ZJ and now the new BJ studs don't fit right through the yoke holes smh, 30.00 for all 4, I gambled and lost, got 4 Moog BJs arriving soon but paid 133.00 for all 4..cheapo parts sometimes not worth it, lived and learned. Thanks for your channela nd videos.
What makes these adapters special is that they have angled edges, so they fit flush against the curve of the C while remaining at a sharp 90-degree angle so you can press the joints straight. Obviously not impossible to grind the tops of generic adapters to match, but difficult to do it with the same accuracy.
Hey Matt! Great video! Which Milwaukee impact is the one you are using there...High torque, mid torque? Been wanting one for a LONG time. Probably be way stronger than the crap air impact I have from 15+ years ago.
great tip. $80.00 is only expensive when you buy something you’ll never use again. if you work on nothing but jeeps then it pays for itself the first time you use it. every thing after that is gravy.
I've had the same experience. Funny thing is I used your old video as a how to a couple of years ago. In the second round I bought the OTC kit. It's so much more enjoyable
I could see where most people would skip getting the $80 additional part, when most complete press kits are only $59 but that's why they leave negative reviews and pictures of broken presses, because they didn't do it correctly work smarter, not harder and buy the correct tools for the job. you will feel better in the end
Thanks for the info and video! That OTC kit for a Dodge looks like it might work for Land Rovers too. I had a hell of a time trying to piece together different ball joint kits to remove my ball joints.
My wife is gonna be mad when she finds out this video just cost us $80 American plus shipping so here in Canada all in it should cost $300 by the time I get it lol
I got a 21 piece kit off Amazon for $75 that has those pieces in it. I got it because the rentals at AutoZone didn't and its so nice to have my own kit.
Advance auto sells/rents a ball joint kit with like 30 pieces in it that includes jeep/dodge adapters. It was 190 bucks a few years ago. Not sure what it goes for now.
AutoZone rents them too. You get the money back when you return them. Their kits didn't have these pieces though. I got a big ass kit off Amazon for $75 that has the jeep stuff plus many others. Same brand too.
Did the ball joints in my son's Comanche without this tool. A real PIA. Getting ready to do the ball joints in my XJ, saw this, and ordered the tool. Thanks Matt!
I'm late to the show - I know. Quick question though. How are you able to fit the Ball Joint Press under the fender with socket and wrench attached let alone an impact wrench. I just had to replace ball joints on the right side of my 2011 RHD Jeep Wrangler Unlimited and ended up tapping it down with a mini sledge and a board because I just could not get the press to fit with a wrench attached. Small cover over the ball joint and angled sleeve below. Ball joint press just would not fit no matter what I tried. This is a Mail Delivery vehicle used daily which is why I resorted to the mini sledge and light taps around to get it in - I still want to do the other side but now am super hesitant. Please help! BTW - This jeep is stock height - no lift kits.
I've got the Astro master ball joint set. Has dad gum everything you need except for a big piece of steel and a hammer. Problem is that the case is huge. Doesn't fit on any shelf and it probably weighs 80lbs.
I bought that kit about 15 years ago off a Mac Tool truck. The tool guy owned actually still does own a 92 Comanche. So he had the kit in stock on the truck. That kit has made me money at the shop. Has saved me many a headache. Also I use the press part to do unjointed too.
Just did my ball joints last week. It is easy if you have a complete press kit. Some tools are just worth spending the extra cash on if you have it. Now we will have to see how long these Tereflex ball joints last.
I followed your first video to change my ball joints. I never would have attempted without it. BUT....BUT. it was a nightmare. One side came out in a massive bang. No idea what was done to it. One side was not like the other. This would have made it so much easier.
I have that kit but the tool itself wasn't big enough for my buddies dodge so I'm making one myself. I'm modeling it after the factory one but it's gonna have a bigger bite.
Holy crap we've come full circle! I found you looking for videos on how to do ball joints on my 96 ZJ Orvis! That took roughly 4 hrs start to finish for both sides upper/lower on mine, btw. Much to my surprise, I had ZERO problems during the entire process! Must've been the prep I did watching your video ahead of time. :D
I got a 21 piece kit of Amazon for $75 that had these pieces in it but before that I took my grinder and cut a similar notch into one of the pieces that was the correct size and it worked perfect. That's until someone stole that kit.
It's not the diameter that's the issue, it's the angle of the surface of the C. The Jeep/Dodge ball joint adapters are shaped to take account of that angle, so you don't have to screw around using shims to keep everything straight.
Great find. Although I am not on the look for any kind of specialty tools, I'm really happy that worked out for ya. I like wrestling with wrong universal tools, so 80$ is way too expensive for me to spend, given that I love fixing things the hard way. Cheers
Unfortunately it seems as though this kit doesn't work with the JK axles or ball joints. I also cant seem to find a single forum that has a link to a tool for the JK ball joints. What do the guys in the Jeep dealerships use for a JK ball joint adapter cup set for removal and installation cause I want to do it right but not pay the dealer to do it, I just want the tools.
I have those tools for work and yeah right tools for right job just makes everything easier. That's why mechanics have so much money wrapped up in tools
I bought that adapters about a year ago because I hated changing ball joints and boy are you right its a game changer. Really wish they came with a case or something.
I got mine for $35 on Amazon, next day delivery too fortunately. I installed them crooked when doing it with the standard press fittings and it made me irritated so I caved in and got the good kit. I’d be paying a mechanic way more than $35 to put them in (not that I’d ever have that in the question anyways) so no harm no foul
I did my balljoints on my Cummins with these tools they are really awesome and worth the cost
Awesome tool been using one for ujoints for years
It does u joints also ?
Thank you! As a female I need this in my life.
I ordered this kit and used it with great succes but I purchased dirt cheap ball joints for my 94 ZJ and now the new BJ studs don't fit right through the yoke holes smh, 30.00 for all 4, I gambled and lost, got 4 Moog BJs arriving soon but paid 133.00 for all 4..cheapo parts sometimes not worth it, lived and learned. Thanks for your channela nd videos.
That is awesome, so helpful
Oh boy gotta get me one of those
Buy it...bring it home...copy the measurements...make it out of your own scrap metal...return the tool.
What makes these adapters special is that they have angled edges, so they fit flush against the curve of the C while remaining at a sharp 90-degree angle so you can press the joints straight. Obviously not impossible to grind the tops of generic adapters to match, but difficult to do it with the same accuracy.
Who has scrap metal laying around to make these, and so they won't bend? These kits are only around $30 shipped.
Looks like I'm getting some new man toy's.👍👍🔧🔧
Wow
Matt does this kit work for an 03 TJ?
OTC makes some great kits. Once the money has been spent you forget about it and enjoy the tools. 😊
Wow!!!What a difference having the right tool makes...
$80... me finding this video 5 years later when it's now $150...
So that first video with the ball joint tool was how the channel got its name...?
Hey Matt! Great video! Which Milwaukee impact is the one you are using there...High torque, mid torque? Been wanting one for a LONG time. Probably be way stronger than the crap air impact I have from 15+ years ago.
Wait a minute Matt, what about the install.
I bought them. I’m getting ready to do this job. Now I’m actually looking forward to it.
For $80, they could've at least provided a plastic blow-mold case to keep them in. But, it is nice just having the right tools sometimes.
I’ve heard they were helpful but seeing it in person I may have to break down and get one.
I know right! Im thinking the same thing...
great tip. $80.00 is only expensive when you buy something you’ll never use again. if you work on nothing but jeeps then it pays for itself the first time you use it. every thing after that is gravy.
I've had the same experience. Funny thing is I used your old video as a how to a couple of years ago. In the second round I bought the OTC kit. It's so much more enjoyable
I could see where most people would skip getting the $80 additional part, when most complete press kits are only $59
but that's why they leave negative reviews and pictures of broken presses, because they didn't do it correctly
work smarter, not harder and buy the correct tools for the job. you will feel better in the end
These kits are worth the $30. Recently did 2017 JK ball joints just using the basic ball joint press and what a pain.
Just bought the same kit but made by Sunluway Co and it's 45 on Amazon, same box and same adapters!! 👍👍
My 23pc ball joint/u joint service kit has those pieces included.
Will this work for a 2002 dodge durango 4x4?
Does the kit help with pressing in the new ones.?
I have that kit and it does make it a lot easier
Hi Matt, please do a tutorial on installation Ball Joints with this set..
Right lets see you put new ones in ,,any clown can take them out
Nice. now that you have a few more projects going on, the $80 seems to be less concern. Nice tool x 2.
Thanks for the info and video! That OTC kit for a Dodge looks like it might work for Land Rovers too. I had a hell of a time trying to piece together different ball joint kits to remove my ball joints.
My wife is gonna be mad when she finds out this video just cost us $80 American plus shipping so here in Canada all in it should cost $300 by the time I get it lol
Hahaha same same lol
Thanks Matt! I'm ordering mine tomorrow.🤙🤙🤙
Great videos.
I miss the t-shirt model.
I got a 21 piece kit off Amazon for $75 that has those pieces in it. I got it because the rentals at AutoZone didn't and its so nice to have my own kit.
Which kit was it?
Rip to that brake line back there. 😄
Wow that is the fastest jeep ball joint removal I’ve ever seen.
That would have saved some BS days in the shop! Nice find
Advance auto sells/rents a ball joint kit with like 30 pieces in it that includes jeep/dodge adapters. It was 190 bucks a few years ago. Not sure what it goes for now.
AutoZone rents them too. You get the money back when you return them. Their kits didn't have these pieces though. I got a big ass kit off Amazon for $75 that has the jeep stuff plus many others. Same brand too.
The autozone ons sucks. Bends too easily
Gonna get that.... Thanks!
Did the ball joints in my son's Comanche without this tool. A real PIA. Getting ready to do the ball joints in my XJ, saw this, and ordered the tool. Thanks Matt!
I'm fairly sure I commented about getting the OTC Jeep kit with the angled adapters about 5 years ago :)
RIP brake hose at 1:46
thats what I thought too, but looking closer, he has it zip tied
Can I borrow that tool?
Holy crap.
I'm late to the show - I know. Quick question though. How are you able to fit the Ball Joint Press under the fender with socket and wrench attached let alone an impact wrench. I just had to replace ball joints on the right side of my 2011 RHD Jeep Wrangler Unlimited and ended up tapping it down with a mini sledge and a board because I just could not get the press to fit with a wrench attached. Small cover over the ball joint and angled sleeve below. Ball joint press just would not fit no matter what I tried. This is a Mail Delivery vehicle used daily which is why I resorted to the mini sledge and light taps around to get it in - I still want to do the other side but now am super hesitant. Please help! BTW - This jeep is stock height - no lift kits.
Finally broke down and bought these things. After doing ball joints with the other pieces, I am done foolin around with it.
$115 now
Mekar ball joint service kit adapter almost identical on Amazon for 30$ without the C clamp.
Thanks for the knowledge! Two years later, when I finally need the kit, it's $33.50; so, I've got it coming to add to my toolbox.
I've got the Astro master ball joint set. Has dad gum everything you need except for a big piece of steel and a hammer. Problem is that the case is huge. Doesn't fit on any shelf and it probably weighs 80lbs.
Does this kit work for JKU too? I hate having to shim stuff like the ball joint cups when I’m working
Thanks for the link... $80 bucks looks like WILL be spent by me very soon just for the no hassle and ease in which you made that look...
When you're ready to get serious, check out the Snap On BJP1.
I bought that kit about 15 years ago off a Mac Tool truck. The tool guy owned actually still does own a 92 Comanche. So he had the kit in stock on the truck. That kit has made me money at the shop. Has saved me many a headache. Also I use the press part to do unjointed too.
Just did my ball joints last week. It is easy if you have a complete press kit. Some tools are just worth spending the extra cash on if you have it. Now we will have to see how long these Tereflex ball joints last.
Pretty darn cool! Should have showed putting new joints on using the other pieces included in that box of magic.
Better send that adapter kit to eric o. SMA Jeep WJ protect
He did his already BUT NOT AS EASY AS THIS VID.
I followed your first video to change my ball joints. I never would have attempted without it. BUT....BUT. it was a nightmare. One side came out in a massive bang. No idea what was done to it. One side was not like the other. This would have made it so much easier.
I have that kit but the tool itself wasn't big enough for my buddies dodge so I'm making one myself. I'm modeling it after the factory one but it's gonna have a bigger bite.
if you buy the more expensive ball joint press kits they come with that adapter and pretty much any adapter you could ever never need
The right tools make all the difference! That said, I hate when engineers design a part that requires specific tools.
dont use power tools to run a puller, real hard on the threads. and i didnt have any problems with the puller i borrowed from autozone to do mine.
Holy crap we've come full circle! I found you looking for videos on how to do ball joints on my 96 ZJ Orvis!
That took roughly 4 hrs start to finish for both sides upper/lower on mine, btw. Much to my surprise, I had ZERO problems during the entire process! Must've been the prep I did watching your video ahead of time. :D
The right tools make it easier 👍 and you didn't need any help from the chickens 🐓 😀
Seems like you could just make your own.
I thought so too but you need just the right diameter or else you run into the same issues you get with the base kit.
@mk319mod0 I think I could make one in a couple of hours or three.
I got a 21 piece kit of Amazon for $75 that had these pieces in it but before that I took my grinder and cut a similar notch into one of the pieces that was the correct size and it worked perfect. That's until someone stole that kit.
It's not the diameter that's the issue, it's the angle of the surface of the C. The Jeep/Dodge ball joint adapters are shaped to take account of that angle, so you don't have to screw around using shims to keep everything straight.
Wow that’s a great tool to have. Killer video. Made it look super simple.
I wanna buy a Cherokee just so I can get that tool!!
Thanks Matt, just in time for me to do my Jeep ball joints.
It is so much easier to remove the joints with a bfh. Bam bam, done.
You are one of the very few people making videos who is smart enough to use a power ratchet of any kind to get work done!
Wish i knew this earlier. Almost 250k!
Will this kit work on a 2017 JK?
😵2 off in under 3 minutes
I gotta get me one of those! Thanks Matt😎👍
I'm sort of new to the channel, what axle is that??
Omg what a major difference!! Thanks for the share!!
How sweet it is. That is worth the price. Thanks for the how to Matt.
Show off. You just cost me 80 bucks😭
Hazard Fraught has a similar kit.
Great find. Although I am not on the look for any kind of specialty tools, I'm really happy that worked out for ya.
I like wrestling with wrong universal tools, so 80$ is way too expensive for me to spend, given that I love fixing things the hard way.
Cheers
@mk319mod0 not wrong
On the subject of ball joints I’m about to replace them in my Tj. I wanted a stronger ball joint. Any you would recommend? Or just stay with spicer ?
Victor Leachman how do you like the Spicer ball joints? I heard they’re the way to go.
Unfortunately it seems as though this kit doesn't work with the JK axles or ball joints. I also cant seem to find a single forum that has a link to a tool for the JK ball joints. What do the guys in the Jeep dealerships use for a JK ball joint adapter cup set for removal and installation cause I want to do it right but not pay the dealer to do it, I just want the tools.
Works perfectly on my JKU.
Holy smokes!! I need to get that!
Same kit/add ons. Love this kit!!
Easy that's bad aaaaaaaaaaazzzzzzzzzzz!
What's all this witch craft!
47 bucks on amazon!!!!
THANKS MATT!🔧🔩🔧🇺🇸
I have those tools for work and yeah right tools for right job just makes everything easier. That's why mechanics have so much money wrapped up in tools
Could you make one
Sure
@@bleepinjeep im mean if i were you id make a few but a couple of c clamps and make specialty kits and sell them i know someone that would buy one
does it come with the c-clamp?
No you idiot. It doesnt.. The c-clamp is 150 bucks alone but you can buy a whole kit with the wrench for 130..
Go effin figure