This panel can put out close to 100 watts th-cam.com/users/postUgkxOqI2yqX0XVrhR2BMJciTWrHJpG8FhJyg when positioned in the appropriate southernly direction, tilted to the optimal angle for your latitude/date, and connected to a higher capacity device than a 500. The built in kickstand angle is a fixed at 50 degrees. Up to 20% more power can be output by selecting the actual date and latitude optimal angle.The 500 will only input 3.5A maximum at 18 volts for 63 watts. Some of the excess power from the panel can be fed into a USB battery bank, charged directly from the panel while also charging a 500. This will allow you to harvest as much as 63 + 15 = 78 watts.If this panel is used to charge a larger device, such as the power station, then its full output potential can be realized.
Why can't we place peltier modules with heat discipitatator under the solar panels so that it uses heat and generates some additional electricity and also can increase the efficiency of solar panels as heat on panels reduced after transferring heat to Peltier midules?. Please let some one clear this by giving technical and practice feasibility.
idk we can name a few... Efficiency, production costs, we had to adapt the production plants, distinct behaviour of the electricity produced, etc... If it were that simple, probably some big company would've made it, trust me.
This is a very simple video. Nothing about the coal or chemicals in the glass tube. Nothing about the PVC or chemicals in the sealing. Nothing about the EVA, back sheet, switch box, ext... PV are much better than coal (pollution) but not the best.
@@robertocaesar that’s true. At least, don’t pretend that it’s “green” or emissions free and that it’s somehow “saving” the planet. It only becomes clean energy after a huge amount of toxic waste has been created.
This panel can put out close to 100 watts th-cam.com/users/postUgkxOqI2yqX0XVrhR2BMJciTWrHJpG8FhJyg when positioned in the appropriate southernly direction, tilted to the optimal angle for your latitude/date, and connected to a higher capacity device than a 500. The built in kickstand angle is a fixed at 50 degrees. Up to 20% more power can be output by selecting the actual date and latitude optimal angle.The 500 will only input 3.5A maximum at 18 volts for 63 watts. Some of the excess power from the panel can be fed into a USB battery bank, charged directly from the panel while also charging a 500. This will allow you to harvest as much as 63 + 15 = 78 watts.If this panel is used to charge a larger device, such as the power station, then its full output potential can be realized.
Why can't we place peltier modules with heat discipitatator under the solar panels so that it uses heat and generates some additional electricity and also can increase the efficiency of solar panels as heat on panels reduced after transferring heat to Peltier midules?. Please let some one clear this by giving technical and practice feasibility.
That is a great idea but im not good with eletroinic parts' names so i dont undertand anything of what u r saying
idk we can name a few... Efficiency, production costs, we had to adapt the production plants, distinct behaviour of the electricity produced, etc... If it were that simple, probably some big company would've made it, trust me.
Solar cell researcher here. You may refer to thermophotovoltaics (a current active research area) for more details.
@@BlackRockExecutive Thank you very much.
@@BlackRockExecutive Thank you very much.
Nice video like
very accurate plans for something like that I found on Avasva
❤❤❤
Do you sell solar panel and module manufacturing machines on turn-key basis?
i do
very nice......
This is a very simple video. Nothing about the coal or chemicals in the glass tube. Nothing about the PVC or chemicals in the sealing. Nothing about the EVA, back sheet, switch box, ext...
PV are much better than coal (pollution) but not the best.
😊
Can someone please tell me how dummy solar cell are made??
didnt show us how they cut the wafers though :(
Nice information Sir..
rather understanding.....
When silicon bars are sliced into wafers, 50% of the bar is turned into useless dust. A great deal of non renewable energy is wasted in the process.
Nothing can be 100% efficient. You eat, and you go to the bathroom.
@@robertocaesar that’s true. At least, don’t pretend that it’s “green” or emissions free and that it’s somehow “saving” the planet. It only becomes clean energy after a huge amount of toxic waste has been created.
I did it with the help of Avasva solutions.
tuman