Great work as ever Dan. Tidy job no doubt the customer is very happy. Good use of tape on your cut 😂. Thanks for taking the time to film for our enjoyment. All the best Pete 👍
Yes nice to see you get the blow lamp out Dan .I don't like the knuckle bends on wast but if you had some to use up it's OK lol .hope your keeping busy iam very quiet at the moment scratching along retirement could be coming early at this rate lol
To be honest I only really use knuckle bends but I can see why you don’t like them haha. Work is really quiet at the minute mate, I’m about 3 days in front. Where as I’m normally 2-3weeks
@@Heatking iam sorting up my scrap at the moment I haven't taken any down for 2 years were iv been so busy I reckon iv got 2 Luton loads her indoors is doing her nut as it's all in the garden lol
BOOM BOOM 💥 gotta luv yh pal...keep doing what your doing please cos I absolutely 💯 think all the ice skaters are definitely thinking how does this fella do things they have never thought of. So please enlighten them how to connect 1"1/4 to 1"1/2 waste without a reducer. I know you know but do they??? Interesting to see tho 🤔 👀 😂
Good job. Think the customer hasnt got a clue though. Far better sort out flooring plaster board patching painting after strip out. Customers always right though 😂
Cheers Derek. It was done like this on an old regulation. It was just a loop between hot and cold pipework under the sink. However…. Its plastic pipework feeding this bathroom so wouldn’t make a bit of difference anyway haha
@Heatking thanks for your explanation.its nice to watch a young chap like yourself who takes pride in their work..keep up the good work bud..you will never be out off work..
@@Heatking yeah can do it through biffa themselves but they can be a bit funny about collecting from residential areas. They do collect it from my driveway though
Nice little job that, you mentioned rubbish, I used to take it from the job, but just ended up storing it in the garage to the point it got in the way, then either got a skip or did two or three tip runs, pain in the arse, plus the fact you should have a waste carrier’s license now if your a business, it’s just not worth the hassle, I don’t mention the waste on my job quotes now, so at the end if the customer asks I just say it’s down to them to get rid of it, still get plenty of repeat work so still🤷♂️
Cheers Paul, and you used to do what my dad does with his rubbish. Which you’re right… is a pain. And with the waste carriers, we got to have one to take scrap to the scrapyard too 😳.
I swear by them basin maits i've never had a leak yet even when they sit slightly on the piss....Where do you get them plastic washers from ? i normally use pipe clips but would prefer the cleaner look of a flat plastic washer
I get them out of close coupled kits mate that I’ve not used. Normally with siamp flush valves when I’m doing a straight swap. Your the second what have said they seem to sit pissed at times! Good to know mate.
I really enjoyed this video mate !! Also did you say they paid or didn’t ? Also what did I say about GLOVES ? That bleed shed was karma. If you noticed you mocked that very song “keep bleeding” earlier in the video so I’m here chuckling lol Sorry not sorry 😊 Let’s keep getting the BIG 5 let’s go
Haha I did mock that song! Well spotted haha! And yes I do need to wear my Ppe. I must do better 😂😂 she paid for the job yeh but didn’t want to pay for the rubbish to be removed. She sorted that herself hah.
![Plumbing a bathroom explained in 4 minutes. [You CAN do it!] #diy #plumbing](/img/n.gif)
Please like this video, it supposedly helps me out 😂😂😂
That's what they say, yet I'm not too sure about this "algorithm"
@@CommercialGasEngineerVideos me neither mate. I see accounts flying up in numbers in such a short space of time. I want what they’re on! 😂
Good honest plumber keep the videos coming mate !!
@@ianpotter3704 thank you Ian! Glad you’re enjoying them!
Yes Dan great vid mate. Simple jobs are never simple are they 😂 300+ likes on this video, you're doing something right 👊🏾 keep grinding away bro!
Thank you mate. 🙏🏽 I don’t know what amount of likes is a good amount 🤷🏽♂️😂😂😂😂
I am a fan amazing work. Thanks for all your videos.
Thanks very much Chris! Much appreciated buddy!
Great work as ever Dan. Tidy job no doubt the customer is very happy. Good use of tape on your cut 😂. Thanks for taking the time to film for our enjoyment. All the best Pete 👍
Thank you Pete. It’s the only use the tape has these days 😂😂😂
Nice little job that. (nice to see soldered joints too) :) loved the make shift plaster. Good work Dan, keep it up mate...
Thank you Daz! I need to get some proper plasterers haha.
@@Heatking plasters, nah, tape is quicker :P
Nice wee turnaround Dan, keep up the great effort on your uploads 👏👏
Thank you very much Andy 🙏🏽🙏🏽🙏🏽
Great job Dan. Have a lovely evening and hope you have a good day at work tomorrow
What a kind comment! Thank you very much! Hope you do to mate!
Another awesome video Dan, ❤
Cheers Paul 🙏🏽
@@Heatking 😃 ❤️
Great job Dan👍🏾👍🏾👍🏾
Thank you very much mate 🙏🏽
Nice job as usual Dan❤. Legend
Cheers buddy appreciate all your support as always!
Nice tidy job as usual Dan...
Thank you matey. Appreciate the support 🙏🏽
Nice job as usual Dan thanks for the upload
Thanks for the comment mate 🙏🏽
Great vid Dan, great looking job.
Thank you matey
Yes nice to see you get the blow lamp out Dan .I don't like the knuckle bends on wast but if you had some to use up it's OK lol .hope your keeping busy iam very quiet at the moment scratching along retirement could be coming early at this rate lol
To be honest I only really use knuckle bends but I can see why you don’t like them haha. Work is really quiet at the minute mate, I’m about 3 days in front. Where as I’m normally 2-3weeks
@@Heatking iam sorting up my scrap at the moment I haven't taken any down for 2 years were iv been so busy I reckon iv got 2 Luton loads her indoors is doing her nut as it's all in the garden lol
Yes mate keep using them basin mates…your a changed man 😂 sarnd job that mate, bit of tarting up that will look well nice, nice work mate 🙌👍
Thank you very much mate. And wouldn’t say I’m converted just yet 😂😂😂
Thanks
Thank you very very very much Alex! You legend!
@@Heatking thank you for the educational video 👌🤓
@@AlexRocks24-7 hope it was mate 🙏🏽
@@Heatking Dan, please wear eye protection 🥽 when you are soldering 🙏🙏🙏🙏🙏🙏
@@AlexRocks24-7 I’ve just bought some new ones! And thankfully don’t solder often anymore! But you’re right buddy
You should have put live red wire on your finger danger finger finger Blaster I mean plaster 😂😂 ps ptfe is the absolute best for applying to cuts
@@ianpotter3704 never tried ptfe! Haha what a great idea!
BOOM BOOM 💥 gotta luv yh pal...keep doing what your doing please cos I absolutely 💯 think all the ice skaters are definitely thinking how does this fella do things they have never thought of. So please enlighten them how to connect 1"1/4 to 1"1/2 waste without a reducer. I know you know but do they??? Interesting to see tho 🤔 👀 😂
Haha cheers mate. That’s a great shout for a video though! I’ll get it done! Thanks buddy for the support as always!!
Nice one bud keep up the good work
Thank you very much mark!
Top work mate
Cheers Daz! Hope you’re well mate.
I’m well thanks, still grinding 💪
@@darrenphillips5874 keep it up brother!
I should be retiring in 7 years but fuck that I’m enjoying myself too much
That spider must have come in to make friends with you Dan he felt sorry for you when you said you had no friends lol
😂😂😂 by the end of the day even he had left again :( 😂😂
@@Heatking he probably got scared when he saw that pressfit gun and done a runner lol
@@charliewillis8527 😂😂😂😂
You should remove the old floor covering before putting the pan in .well I would.🍺👍🇬🇧✅
That was the chipboard floor mate. No idea why it was green, maybe moisture resistant. But yeh there was no finished flooring there :)
I still use plumbers mate on the basin wastes😁
Tried and tested method 🙏🏽
Plumbers mate with a smear of boss white makes it alot easier to use,
Good job. Think the customer hasnt got a clue though. Far better sort out flooring plaster board patching painting after strip out.
Customers always right though 😂
I absolutely agree mate. I did tell her I’d just take out the old stuff and come back but this is what she wanted haha
Had them basin mates sit pissed before but they never leak. Only thing is I can never be arsed to get a load so just use mastic instead
I’ve never had an issue with mastic to be honest mate. However they are a bit of a pain to remove when they’ve been siliconed in.
Good video earth bonding was present at the start off the installation.why was it not refitted at the end..earth bonding is there for a reason.......
Cheers Derek. It was done like this on an old regulation. It was just a loop between hot and cold pipework under the sink. However…. Its plastic pipework feeding this bathroom so wouldn’t make a bit of difference anyway haha
This house has been on my channel before, upgrading most of
The hot and cold pipework to plastic as she kept having pin holing copper pipe.
@Heatking thanks for your explanation.its nice to watch a young chap like yourself who takes pride in their work..keep up the good work bud..you will never be out off work..
I’ve got a big biffa bin at home for all the rubbish off jobs £72 a month and gets collected every 2 weeks 👍
That’s a good shout is that mate. Did you enquire via biffa themselves?
@@Heatking yeah can do it through biffa themselves but they can be a bit funny about collecting from residential areas. They do collect it from my driveway though
looks like it came from B and Q I have had a few bowls that have had wonky waste holes from there
@@johnrowland6214 you’re probably right mate. I don’t know where is came from but it wasn’t the best haha
I tend to use masking tape for my cuts ,you dont need the tissue under breath lol
Good shout 🙏🏽
Nice little job that, you mentioned rubbish, I used to take it from the job, but just ended up storing it in the garage to the point it got in the way, then either got a skip or did two or three tip runs, pain in the arse, plus the fact you should have a waste carrier’s license now if your a business, it’s just not worth the hassle, I don’t mention the waste on my job quotes now, so at the end if the customer asks I just say it’s down to them to get rid of it, still get plenty of repeat work so still🤷♂️
Cheers Paul, and you used to do what my dad does with his rubbish. Which you’re right… is a pain. And with the waste carriers, we got to have one to take scrap to the scrapyard too 😳.
Another great video mate, 2hrs over 500 views and only 106 likes doesn’t make sense but what can you do 😂
Haha I know mate. Some people don’t have TH-cam accounts I suppose buddy 🙏🏽
Makes sense
I swear by them basin maits i've never had a leak yet even when they sit slightly on the piss....Where do you get them plastic washers from ? i normally use pipe clips but would prefer the cleaner look of a flat plastic washer
I get them out of close coupled kits mate that I’ve not used. Normally with siamp flush valves when I’m doing a straight swap. Your the second what have said they seem to sit pissed at times! Good to know mate.
I really enjoyed this video mate !! Also did you say they paid or didn’t ?
Also what did I say about GLOVES ? That bleed shed was karma.
If you noticed you mocked that very song “keep bleeding” earlier in the video so I’m here chuckling lol
Sorry not sorry 😊
Let’s keep getting the BIG 5 let’s go
Haha I did mock that song! Well spotted haha! And yes I do need to wear my Ppe. I must do better 😂😂 she paid for the job yeh but didn’t want to pay for the rubbish to be removed. She sorted that herself hah.
@@Heatking I don’t know why autocorrect said bleed shed 🤦🏻♂️.
Thanks for clearing up that confusion
@@thegrinch295 haha no worries mate
🤘😎🤘
Thank you Wayne! 🙏🏽🙏🏽🙏🏽
Press fit is good when you can't see it but it's for lazy plumbers now
I’ll admit I’m lazy 😂😂
still use plumbers mait,mate you can use any left over and doesnt matter if u disturb the waste much better than silicone
I’ve never used it to be honest, although have a tub in the van 😂
Just smash the side out of it and have done with it 😂
😂😂😂😂
get a waste licence aint that dear last for 3 years 180 r so maby different in your area
Yeh mate worth it for that price 🙏🏽