Under $20 | How to Make DIY Stamp Positioner | MISTI Inspired Stamp Positioning
ฝัง
- เผยแพร่เมื่อ 23 ม.ค. 2021
- Finally! I finished this video on 7th June 2020, but life events unfortunately got in the way and I never got around to post it. Totally forgot I even finished this video until I went to check it after making the diy card videos. xD
This technique was inspired by the MISTI stamp positioner.
I made this stamp positioner in under $20SGD, but it really depends on where you're able to get your materials from. I managed to find a suitable wooden box, magnetic sheet and a shop that customises PVC sheet sizes on Taobao (Chinese shopping site), so I got to buy my supplies fairly cheaply!
----
Materials used:
- One side of a flat wooden box (32.5cm*23.5cm*2cm)
- Hinges from the same wooden box
- 3MM thick transparent PVC sheet (32.5cm*23.5cm)
- Super glue
- 2MM thick super strength magnetic sheet
- A4 foam craft sheets
- Flat round magnets
----
Video editing tool: Wondershare Filmora
----
Music: Ehrling - Adventure
Soundcloud: / ehrling
Facebook: EhrlingMusic/
Instagram: ehrlingofficial
Spotify: open.spotify.com/artist/5wo7dlNLNdFmaaU7NTtdoT
----
Instagram (wax seals): waxwithmel
( / waxwithmel )
Instagram (general craft): mystique.crafts
( / mystique.crafts )
----
Thank you for watching!
----
#diy #stamp #positioner #misti #mistitool #stamping #stamppositioner #tutorial #instructions - แนวปฏิบัติและการใช้ชีวิต
Yours is the best one I seen so far. No one thinks on using a magnetic sheet and small magnets to hold paper down. TYFS
I'm glad this helps! 😁😁
very smart
Well done. Very resourceful and clever.
Thank you! 😄
Best so far
Thank you! 😁
So smart!❤
Thank you! 😄
Too good 👍👍👍👍👍👍👍👍👍
Thank you! xx
Very clever - you have a new subscriber.
Thank you! 🥰
Nice 🤗👍👏👏👏
Thank you!
this one is good as well i need to try with a picture frame
Awesome idea! The beauty of this is we can all use household materials that we can find that do the job and not overspend on branded gadgets 😁
@@themellieway yes as even for if spend just 20$
+on the tools i think is way too much Since it's pandemic and out of job now. Need to make use of what we already have
You can view a TH-cam clip making one with a double hinged IKEA picture frame. It does work .
Your is the best one I seen so far. No one thinks on using a magnetic sheet and small magnets to hold the paper in place. Tyfs
I had no luck sourcing even a box for less than $20. If anyone finds one, please share where you got it. Thanks!
Hi! You could try your luck with Aliexpress, they have a wide selection of wooden boxes to choose from 😁 If you can't find flat boxes, you can use the lid of a wooden box, that's what I did for mine!
If I don't have transparent pvc, can I replace it with mica?
Hi, sure! It just needs to be flat and durable, it doesn’t have to be transparent either if you don’t have anything like that suitable
@@themellieway Sister, if the mica is two millimeters thick, can it be used, because in the video the pvc piece is three millimeters thick?
@@moingaycungve1070 Yeah, 2mm would be thick enough too :) I made one using a regular CD case and that's about 1-1.5mm thick. You just need to take care when stamping because I cracked my CD case after using too much force 😂 It still works, it's just not as pretty
@@themellieway thank you very much
@@moingaycungve1070 You're most welcome! Happy to help :)