I don't want to come off rude but you two are no spring chickens and I'm amazed at how hard you're working! No way could i keep up with either of you! Great job!
Lucky find with a beautiful tree like that. Great team work. I turn bowls on a lathe and never see that pretty wood. It has lots of character. Perfect cuts.
Thank you for sharing your life with us. World leaders would be wise to observe how much more enjoyable life is in peace. Thank you for all you are and all you do!! -Curt
I could be wrong but this doesn't look like cherry tree wood to me looks more like dawn redwood with the way the trunk is twisted and the texture of the bark.
On the first cut , why not cut the whole edge off and not juss a tiny piece for the first cut , I always see that on sawmill videos , a lil piece first ?
Thank you for your comment☆(*^_^*) Certainly, when you look at it, you wonder. The wood from the edges has its uses. It is more efficient overall to cut the lumber into smaller pieces during the initial sawing process than to cut the lumber into smaller pieces later.(*^_^*)
I like walking through the woods finding 6cm saplings with vines wrapped around them. I cut them 1.5 m long and carve on the vines to make them look like snakes and epoxy the finished item to make walking sticks.
![#116【製材】vs三つ股の巨木「栴檀センダン」【lumbering】 Three-pronged giant tree [Chinaberry]](http://i.ytimg.com/vi/Ripx2HySoFg/mqdefault.jpg)
タイトル通り 凄いねじれですねぇ・・・これだけ大きな親分でも苦労の絶え間が無かったのでしょうねぇ 次の世代で又綺麗なピンクの花とオレンジがかった葉のコンビネーションで楽しませてほしいです。山中の群れをなす杉に負けじと堂々と立つ孤高の親分山桜 イメージできますねぇ・・・
サクラ材は硬く緻密で家具とか和菓子の木型にも使われるんですよねぇ。随分前ですが気に入ったサクラ材の椅子を見つけたんですが・・・懐と相談で諦めたんです。桜と言うと私の記憶はそれなんですが、私はねじれてはいませんよ（笑）
ねこねこさんいつもコメントありがとうございます☆
きっと今頃、子分達が山でがんばっていることでしょう！(*^_^*)
いつもおしゃれなコメントを下さるねこねこさんが気に入る椅子がどんなおしゃれな椅子なのか大変興味が湧くところです♪
懐との相談は残念だったですが、またいつか素敵な出会いがありますように☆(*^_^*)
雨風に耐えて育った山桜素晴らしい外から見るだけでも景色👍が想像できますね。太く長くそれにねじれ、曳く🎵作業に目が点でした。
深川さんいつもコメントありがとうございます。
迫力ある面白い製材になりました♪(*^_^*)
I don't want to come off rude but you two are no spring chickens and I'm amazed at how hard you're working! No way could i keep up with either of you! Great job!
A well oiled team that works together with little discussion! Very professional.
so impressed how neat they keep their business. they wear safety equipment and take their time. Really enjoy their vlogs.
丸太(原木)を見て、「挽いたらどんな木目が出るだろうか？」と想像するワクワク感が、素人の私にも伝わって来ています。
コメントありがとうございます！
そんな風に臨場感を持って見て下さるととっても嬉しいです☆(*^_^*)
これからも少しでも皆さんにワクワクして頂けるようにがんばります♪
A very well-oiled machine, these two working together. It's a delight to watch them xxx
なかなか味のある良い杢目が出てましたね。ハズレでなくて良かったですね。それにしてもお二人の阿吽の呼吸で息ピッタリのお仕事ぶりに感銘しております。くれぐれもお怪我の無いようになさってください。
コメントありがとうございます！
なかなかの面白い杢目でした♪
これからも夫婦仲良く仕事をしていけるように安全第一で頑張ります☆(*^_^*)
What an impressive and gorgeous piece of wood. Can’t wait for each cut to reveal the next layer.
What a wonderful video, I'm really impressed! 👏
Lucky find with a beautiful tree like that. Great team work. I turn bowls on a lathe and never see that pretty wood. It has lots of character. Perfect cuts.
That tree lived a long happy life now it will live on as beautiful furniture.
Thank you for your comment.(*^_^*)
I agree. From now on, it will bring joy to many people in a different way than ever before.
Thank you! 🙏🏼❤️🔥🙏🏼 Watching you guys is a very Zen experience…It is a true joy that makes my heart happy. 🌸💪🏼 Love & respects from Florida, USA.
元来、桜は素性がいいはずですよね。（節は有っても）捻じれ方を見ると藤つるに絡まれたのでしょうかね？見事な杢目に変身ですね
I think I would’ve been tempted to peel the bark and use the log as a pillar instead of cutting it up…the twists were gorgeous!
Look at these guys. Hard hats, long tucked in pants, eye protection, gloves and real shoes. True professional!
The wood is really cool
Beautiful. 😎
Great video, and love the old ISHADA machine. 👍
Does anyone know the reason for the 3 staples in the end. 🤔
健康にお気をつけて、事故なきようご活躍をお祈り申し上げます。
♪久し～振り～に（島倉千代子）観に来ました。
土手に植わってる桜の木は良く捻れてますよね。
スポーツマンの隆々とした筋肉の様に凹凸が有って
尚且つ 反時計回りに。川の風で幼木期から耐える
方法で育つからでしょうか と思っています。
PS 良いね！～～～ 今日も安全ヘルメットを！！！。
千代子さんお久しぶり♪に見に来て下さってありがとうございます☆(*^_^*)
そうですね。日本全国、土手にはよく桜の木が植えられていますもんね。
ヘルメットもお褒め頂きありがとうございます。
安全運転でこれから頑張ります！
Beautiful wood
We love Mama-San!😄
What a cracking old tree, and beautifully cut. Just shows, an old machine that's well maintained, and used skillfully, can still do the work.
Took me to halfway through the video to figure out the helper is a woman. You all rock, enjoyed the video.
The pink finally dawned on me!
I love your vids!!
The baby is getting so big! Is he grandson? also, beautiful wood
Thank you for your comment.
He is the 6th grandchild. He will be two years old soon.
By the way, my 7th grandchild was born last month♪(*^_^*)
Thank you for sharing your life with us. World leaders would be wise to observe how much more enjoyable life is in peace. Thank you for all you are and all you do!! -Curt
The Artists of the Saw!!!
見応えあって面白かった
提案なのですが木目だけ見たい人用に短く編集したパターン作ってみませんか？
I could be wrong but this doesn't look like cherry tree wood to me looks more like dawn redwood with the way the trunk is twisted and the texture of the bark.
Watch your hands...that blade is unforgiving.🧐
Is there a woman under the pink hard hat hat .I hope so!
This is about like watching paint dry.
Study and measure 10 times then make the first slice 👍That wood is absolutely gorgeous
The carriage needs some lubrication! However, I’m not seeing the laser line on the end of the log? At. 43.00 I am now seeing the laser line !!
That cut at 34 minute mark. Wow!
Thank you !! (*^_^*)
日本でそのような桜の木が育つにはどれくらいの時間がかかるのでしょうか？
We have a lot of soft Maple trees that have that twisted look.
Thank you for your comment.
Twisted wood is difficult to lumber, but the grain is interesting. (*^_^*)
Когда работа в радость.получаешь удовольствие.😊🎉❤.
Что это за подход к работе? Неужели всегда так?
Wow, that spiral twist is crazy! Could be difficult for the carpenter to plane.
Thanks for the lots of comments!
It's a really crazy twist.
It looks interesting, but it's hard to work with. (*^_^*)
Spectacular wood and great team work! Did any of the boards from this log show any tendency to twist, due to internal stresses?
こんにちは😃
たくさんの製材されているのを拝見させて頂いています。
ご夫婦仲いいのがいつ見ても羨ましい限りです。
ところで、私の趣味なんですがトラックの板バネでナイフや包丁を作っています。
握り手には木の端材などを使っていますが、この製材の最初を見て、ねじれ山桜の皮とかは握り手にはちょうどいいのではと思った次第です。
宜しければ譲っていただけると嬉しいです。
他に何かあれば嬉しく思います。
コメントありがとうございます☆
ナイフ作りの動画を拝見させて頂きました。
面白いことをされていますね！(*^_^*)
ご期待に添えるかは分かりませんが、材のご利用をご検討下さる場合は概要蘭のメールアドレスよりご連絡下さい。
@@kirishimasawmill 様
先程メール送りました。
ご確認お願い致します🙇♀️
Now, here is a guy that knows how to cut lumber.
On the first cut , why not cut the whole edge off and not juss a tiny piece for the first cut , I always see that on sawmill videos , a lil piece first ?
Thank you for your comment☆(*^_^*)
Certainly, when you look at it, you wonder.
The wood from the edges has its uses.
It is more efficient overall to cut the lumber into smaller pieces during the initial sawing process than to cut the lumber into smaller pieces later.(*^_^*)
I use these kind of cuts to carve shallow bowls and plates. The natural edges give them all unique looks.
I like walking through the woods finding 6cm saplings with vines wrapped around them. I cut them 1.5 m long and carve on the vines to make them look like snakes and epoxy the finished item to make walking sticks.
It is none of my business but is the cameraman a son or son-in-law?
Thank you for your comment. (*^_^*)
The photographer is my son-in-law.
And his son is the baby in the video.
He is our sixth grandchild.
Lady in pink is putting herself in danger.
she's a seasoned pro, been doing this probably half of her life. i think she's aware of any dangers.
👍
☆(*^_^*)☆
Стань туда ,где пила идёт!!!😢
They need to wear steel-toed boots, not cloth sneakers
Diese Maschine muß um die 100 Dezibel laut sein . Und kein Gehörschutz , uff . 😮 😢
Why don't anybody wear goggle
女性の方頼もしい！
Дальше то заехай автопогрузчиком, что бы тельфер не задействовать на каждую плаху.
Lady no safety measures
쓸데 없이 기계를 너무 많이 공회전 시키네요 모터 수명도 짧아지고 에너지 낭비에다, 소음으로 인한 난청이 걱정 되네요
わざわざ製材機に近づいてノイズ拾わなくてもいい気がするのだが。
貴重なご意見ありがとうございます。(*^_^*)
臨場感等を感じて頂きたくて撮り方も試行錯誤しています。
でも急に音が大きくなったりすると視聴しにくいですよね。
よりよい映像になるようにこれからも工夫していきます！
板にするだけが製材なのか？疑問を抱くのは私だけかな、泣いているように聴こえる。
コメントありがとうございます。
1本1本、その木の魅力をより引き出せるようにと考えて試行錯誤しているつもりですが、可能性は様々ですね。(*^_^*)
この木を角物に挽いてどうする？板挽きが一番いい。
@@井上雅央-u9u そんなに単純な発想では無いけど❗️板じゃ無ければ角？何言ってるの。
誹謗中傷するなら、自分ならどう製材するかまで書けよ。霧島木材さんはプロ。素人とは違う。
@@井上雅央-u9u 素人だから、営利度外視で主観をコメントできるんだよ。価値観が違う値段がどの程度だ？なんて微塵も考えてコメントして無い、貴方は？