Thanks for this down to earth “Rolling and Tipping” video as it really helped me understand why you tip: It’s to get rid of all those pesky tiny bubbles that form on the surface. This is the first video which has specifically mentioned the little tiny bubbles that were appearing in my two pack linear polyurethane top coat when rolling. Just for the record, I was using an Australian manufactured polyurethane called Norglass. I thought I could just roll and it on. WRONG. I subsequently got frustrated when I noticed all these minuscule bubbles forming. Fortunately, it was just the first top coat so I think I have been able to sand them out using 400 grit wet and dry. The bubbles, interestingly enough, we’re not forming everywhere, just in a few spots. I don’t know why that that was. Anyway, you solved the mystery for me. You were the first youtube video -and I’ve watched many- to mention this this fact. Ie. Tipping is necessary when you use a roller to get rid of all the tiny surface bubbles that look like they could be specks of dust. They are just that small bubbles but that are not dust they are just bubbles which can be “tipped” out with a brush. Cheers and Thanks Again Sandy B Coochiemudlo Island Australia
Leon ! Wow! Great video, would love to see products used. I learned so much, I'm going to follow this and take on my own project, thank you for helping me get started!
Video veramente ben fatto e interessantissimo tecnica semplice ma efficace e il risultato e perfetto, grazie x la dimostrazione e complimenti. solo una domanda. .a che temperatura esterna solitamente vernici..?..grazie.
Leon, I have watched your video no then rolled a section of my Hatteras with AwlGrip. I can see brush marks in the final finish? Did I not use enough reducer? Any help would be welcomed
@@jefferydavis3194 That is too windy,try doing it in the morning when the temperature is nice and cool, if you are doing it outside without any protection from the wind you need to do it when there is hardly any wind even just for a couple of hours just to give time for the paint to flow.
Planning to repaint with Awlgrip, hull white but local yard will not spray; only roll & tip. When both are done by top painters should there be noticeable difference ?
Hi John..on this video i used the Omega "SPALTER " brush this type of brush is perfectly made for tipping, but one of my preferred brush to use is the Corona "EUROPA" brush...one of the best.
Roll and then tip the first coat...leave to cure for at least 2 days or more the better,then sand it with 400 grit sandpaper ,then roll and tip again for the second and final coat.
Great video. Do you have a keep a wet edge through out? It seemed like you mentioned you did one area and then another day did an adjoining area? Or did you need to do the whole side at once and keep a wet edge going?
yahh always keep a wet edge,this one i did the one side at once...but you can always plan your job,if you think it is too big and you have an area to do a cut that is not so obvious..do it.
Awesome job, subscribed ! I have a couple questions because I'm new to painting. I am going to be painting my 21' mako center console boat . What brand foam roller and brush did you use ? Also how many coats did you do and how long did you wait before coats ? Lastly I want to paint my boat in ice blue awlgrip. Other than buying a gallon of the awlgrip do I need to buy a hardener or anything to mix into the paint ? Thanks in advance.
When we were in Florida the foam i was using is the Redtree 9 inch yellow foam roller,good for big surfaces,you can use smaller foam roller for smaller job,any foam roller that can handle urethane paint is good as long as it is thin nap...two coats is recommended,on this project of mine the whole surface is one coat but the repairs is two coats, and yes aside from the base paint ,you need the brushing converter and the brushing reducer.
@@tylerthomas3744 as for the brush i usually use the Corona Europa brushes,i love those brush,but it's very hard to get it here in Spain,...on this particular project i thinned my paint 20 percent,you can thinned it to 30 percent if the weather is a bit warm..and i usually wait at least 3 days before i sand again for the second coat.
Hello sir Leon, ano pong agency niyo sir? Dream job kopo talaga sa yacht. May experience po ako sa general cargo vessel, tug boat/towing vessel. Gustong gusto ko po mag yacht sir san po ba applyan dito sa pinas po sir? Thank you po
Thankyou for the knowledge sir big help for the beginers like me ❤
You're welcome..
Best roll and tip results on TH-cam.
Wow, thanks!
Great Video and nice job Kabayan! from SouthOfFrance.
Thanks! 😃
Amazing work....real craftsman. Please keep these videos up
Thank you..
Thanks for this down to earth “Rolling and Tipping” video as it really helped me understand why you tip: It’s to get rid of all those pesky tiny bubbles that form on the surface. This is the first video which has specifically mentioned the little tiny bubbles that were appearing in my two pack linear polyurethane top coat when rolling. Just for the record, I was using an Australian manufactured polyurethane called Norglass. I thought I could just roll and it on. WRONG. I subsequently got frustrated when I noticed all these minuscule bubbles forming. Fortunately, it was just the first top coat so I think I have been able to sand them out using 400 grit wet and dry. The bubbles, interestingly enough, we’re not forming everywhere, just in a few spots. I don’t know why that that was. Anyway, you solved the mystery for me. You were the first youtube video -and I’ve watched many- to mention this this fact. Ie. Tipping is necessary when you use a roller to get rid of all the tiny surface bubbles that look like they could be specks of dust. They are just that small bubbles but that are not dust they are just bubbles which can be “tipped” out with a brush.
Cheers and Thanks Again
Sandy B
Coochiemudlo Island Australia
I am glad mate ..good luck with your next roll and tip project...cheers👍👍
Best video that I have seen on Awlgrip. Would like to see tips on mixing and mixing small amounts. Thanks for your tips
Thank you ,i will do that in the next coming videos...good idea ,mixing tips specially on hot weather days...
Awesome thanks
I can’t believe TH-cam is just recommending your channel to me. All I do is watch yachts, refits & boat painting. Mabuhay!
Cheer mate....welcome to my channel and thanks for watching my video..Mabuhay!
Straight forward, awesome job Leon!
Nice Work Leon.. you are a true craftsman and have improved my confidence to try rolling and tipping.. thanks for sharing.
Beautiful work brother. A true artist.
Thank you..
ayos pre... salamat
Great video! Thank you for posting. I am going to roll some clear. Your video was very helpful
You're welcome...good luck on your project.
Great 👍video
Your a true 👍professional
Wow nice good job
Thank you...ikaw na gud na.
Leon ! Wow! Great video, would love to see products used. I learned so much, I'm going to follow this and take on my own project, thank you for helping me get started!
Thanks...and good luck on your upcoming projects,.
Great video, thanks for posting.
Video veramente ben fatto e interessantissimo tecnica semplice ma efficace e il risultato e perfetto, grazie x la dimostrazione e complimenti. solo una domanda. .a che temperatura esterna solitamente vernici..?..grazie.
Great job. I'm a painter too. Kenny's Yacht Maintenance. Where can I buy these tipping brushes?
Nice boss
Go go lang sr. Keep it keep vlogging😉
Leon, where are you located?
Palma de Mallorca at the moment.
Great video Leon :) wher in the world are you based? You are the first I have seen using the brush so many times after rolling
Thanks...we are based in Palma de Mallorca at the moment.
In cooler climates I plan to use fast reducer will that affect rolling on tipping, I only have a small surface to do.
Leon, I have watched your video no then rolled a section of my Hatteras with AwlGrip.
I can see brush marks in the final finish? Did I not use enough reducer?
Any help would be welcomed
You don't want to used too much reducer either...maybe it's too hot during the time you were painting or a bit windy?
@@leoncaputolan thank you for the response. Yes the wind was blowing about 15kts, so I will make sure the next time I paint it is still.
@@jefferydavis3194 That is too windy,try doing it in the morning when the temperature is nice and cool, if you are doing it outside without any protection from the wind you need to do it when there is hardly any wind even just for a couple of hours just to give time for the paint to flow.
Salamat po !👍👍
You're welcome 👍👍
Planning to repaint with Awlgrip, hull white but local yard will not spray; only roll & tip. When both are done by top painters should there be noticeable difference ?
Not really..it all depends of how good the roll and tip application, and how old is the original paint job.
What type of brush as to hairs ?
Nice video. What kind of bush are you using?
Hi John..on this video i used the Omega "SPALTER " brush this type of brush is perfectly made for tipping, but one of my preferred brush to use is the Corona "EUROPA" brush...one of the best.
@@leoncaputolan Thanks Leon :)
Your a man of great skill! I'm wondering what thinning ratio you use. I will be applying paint at 65°F and 65% humidity.
on that temperature i usually thin/reduce around 20 to 25 percent...
What is the coverage for 1 gallon of the Awlgrip?
Good info, great video. Question; Do you only have to do one coat if you roll and tip?
Two coats is always recommended for roll and tip.
@@leoncaputolan Do you tip after the first coat? Or do you save the tipping process for the 2nd coat?
Roll and then tip the first coat...leave to cure for at least 2 days or more the better,then sand it with 400 grit sandpaper ,then roll and tip again for the second and final coat.
@@leoncaputolan Thanks
Great video. Do you have a keep a wet edge through out? It seemed like you mentioned you did one area and then another day did an adjoining area? Or did you need to do the whole side at once and keep a wet edge going?
yahh always keep a wet edge,this one i did the one side at once...but you can always plan your job,if you think it is too big and you have an area to do a cut that is not so obvious..do it.
Awesome job, subscribed ! I have a couple questions because I'm new to painting. I am going to be painting my 21' mako center console boat . What brand foam roller and brush did you use ? Also how many coats did you do and how long did you wait before coats ? Lastly I want to paint my boat in ice blue awlgrip. Other than buying a gallon of the awlgrip do I need to buy a hardener or anything to mix into the paint ? Thanks in advance.
When we were in Florida the foam i was using is the Redtree 9 inch yellow foam roller,good for big surfaces,you can use smaller foam roller for smaller job,any foam roller that can handle urethane paint is good as long as it is thin nap...two coats is recommended,on this project of mine the whole surface is one coat but the repairs is two coats, and yes aside from the base paint ,you need the brushing converter and the brushing reducer.
@@leoncaputolan thanks what reducer did you use and what was your paint to reducer ratio ?
@@tylerthomas3744 as for the brush i usually use the Corona Europa brushes,i love those brush,but it's very hard to get it here in Spain,...on this particular project i thinned my paint 20 percent,you can thinned it to 30 percent if the weather is a bit warm..and i usually wait at least 3 days before i sand again for the second coat.
Converter:
Awlgrip AWLCAT #3 Brushing Converter H3002
Reducer:
Awlgrip T0031 Brushing Reducer
@@leoncaputolan thank you for the feedback 👍
qir anung qukat ng tempja ng awl grip
Hello sir Leon, ano pong agency niyo sir? Dream job kopo talaga sa yacht. May experience po ako sa general cargo vessel, tug boat/towing vessel. Gustong gusto ko po mag yacht sir san po ba applyan dito sa pinas po sir? Thank you po
Hello ..mag apply ka sa Crewasia Inc. or sa Eurasia yan ang mga agancy na Yate lang ang hinadle nila...look them up online for there info..good luck 🤞
Paano po mag apply jan Sir? Salamat po
👍