Dear viewer. Put 👍 in advance! 90% of viewers watch my channel without subscribing🤔 subscribe to the channel so as not to miss new videos! Write comments if you liked the result or something needs to be changed in the next custom! You can also share this video on Facebook or any other social network. I will be grateful to you! Your "VN Custom"
Когда начинал, тоже хотел найти подобное видео, но к моему сожалению, я не нашел. Я надеюсь это видео, поможет вам! Но есть ещё много нюансов! Постараюсь в скором времени восполнить этот пробел на Ютубе!
Thank you so much for presenting this video tutorial! I have seen this done, but you make it look so much easier! This helps me a great deal. Not only with making my own moving parts for models, which is not something that I have attempted yet, but also to REPAIR old models that have a broken hood / bonnet pin, or door hinge. I have a couple of projects that have remain undone because I haven't figured out the way to do this with simplicity. I definitely like how you use a jeweller's saw and not a Dremel. I have used a Dremel a couple of times, and didn't like it. There is often no substitution for "old fashioned" manual tools and skill! Thanks, VN Custom!!!
Very nice video and easy to understand. Continue like this!!! I have a question: What kind of glue do you use? I see that glue needs an activator to cure.
I bought them at a local store, tried to search on eBay but without success ... Maybe it's easier for you to buy these rozetka.com.ua/362474187/p362474187/?gclid=CjwKCAiAhqCdBhB0EiwAH8M_GgjRC8RpbpF0zrnMkM-NEU1VozRnRN0Z1O-nzIXjdyHWgyh1wiG30RoCNQAQAvD_BwE
Dear viewer. Put 👍 in advance! 90% of viewers watch my channel without subscribing🤔 subscribe to the channel so as not to miss new videos! Write comments if you liked the result or something needs to be changed in the next custom! You can also share this video on Facebook or any other social network. I will be grateful to you! Your "VN Custom"
Link for the saw you used?
Наконец то на TH-cam появилось нормальное видео по этой теме. Огромное спасибо автору.
Когда начинал, тоже хотел найти подобное видео, но к моему сожалению, я не нашел.
Я надеюсь это видео, поможет вам! Но есть ещё много нюансов! Постараюсь в скором времени восполнить этот пробел на Ютубе!
This is so cool, man, well done on another great build
Большое спасибо, что делитесь опытом! Очень полезно
Thank you so much for presenting this video tutorial! I have seen this done, but you make it look so much easier! This helps me a great deal. Not only with making my own moving parts for models, which is not something that I have attempted yet, but also to REPAIR old models that have a broken hood / bonnet pin, or door hinge. I have a couple of projects that have remain undone because I haven't figured out the way to do this with simplicity. I definitely like how you use a jeweller's saw and not a Dremel. I have used a Dremel a couple of times, and didn't like it. There is often no substitution for "old fashioned" manual tools and skill! Thanks, VN Custom!!!
Thank you very much for such a comment, I am very pleased that my videos help! I wish you good luck!
Paper clip was such a useful invention
Very nice job on that Maverick!
What are all the items you used cause all i know is the paper clips
Outstanding job thanks for sharing!!
Nice job buddy looks good😍😍😍
omg... that's so cool dude... I wish that kind of hot wheels came into my country!!!... bad luck I guess...
Чувствую после этого видео продажи RLC моделей упадут)
Огромное спасибо за видео! Оно явно поможет мне сделать свои модели ещё круче.
Я очень доволен, что моё видео полезно!👍
Great tutorial. SUBSCRIBED!!
thank you very much!
What is that sleeve ??u are using as the hinges set up this is best and cleanest set up I have seen ❤👍🗽🇹🇹
this is a wire end, diameter 0.8mm
Very nice video and easy to understand. Continue like this!!! I have a question: What kind of glue do you use? I see that glue needs an activator to cure.
Thank you very much for your comment! I use uianoacrylate glue with "Akfix" activator.
Thanks man! Really helpful
Nice job! Thanks for sharing
Muy buen video amigo te felicito 👍👌 una pregunta cómo se llaman los tubitos que utilizas para hacer las bisagras
thanks for the comment! these are not insulated wire lugs!
Compra clips con plastico y sacales El plastico y lo usas para Los ganchos de Las puertas
new scribe just want to say i loved this vid series 😁thanks for sharing scooter d🤗😎ps that is one kool build🤩
dou that was amazing i think i paused and backed up 3 maybe 4 times 🤣
Very Nice 👍 👍
Hot job!! Hey what size blade you using on your saw ?
Excelente instructivo !!!!!!
What number or how many millimeters is the blade for the saw that you use to open the hood of the car?
Was wondering the same thing, the blade we have keeps snapping so easily
Wow good job brother
Keren banget
thank you very much!
Link to the saw blades and the silver thing you put the paper clip in?
a.aliexpress.com/_msMQrbQ
a.aliexpress.com/_mtHT5tE
absolutely subs...great
What wire do you use to cut the hood ???
Great video. Do U have a link to wire end ferrules U use. Having trouble finding them, here in Australia. Cheers Graham
I bought them at a local store, tried to search on eBay but without success ... Maybe it's easier for you to buy these rozetka.com.ua/362474187/p362474187/?gclid=CjwKCAiAhqCdBhB0EiwAH8M_GgjRC8RpbpF0zrnMkM-NEU1VozRnRN0Z1O-nzIXjdyHWgyh1wiG30RoCNQAQAvD_BwE
background music from vex4
would this work for the honda civic type r hotwheel too?
no, there is a slightly different system.
@@VN_Custom oh alright
What is the tube thing bro?
Cool
hi 🌹 good night ji 🌹 awesm super 💞 very good video 🌹 No 1 🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹
Thank you!
Can you send me a link to the kind of saw you use please?
stanochnik.com.ua/ua/p1099595277-pilka-yuvelirna-super.html?source=merchant_center&gclid=Cj0KCQjwib2mBhDWARIsAPZUn_kkw3_1GUm-I4SHSeEVi2hCWL6UfVLjmot_bmlsZE0TpQ4vk_5xxFcaAjyCEALw_wcB
What’s the spray used with the glue?
This is an activator of cyanoacrylate glue, sold as a kit. often used for gluing wood, but also suitable for metal
What saw did u use?
0.3 mm
@@VN_Custom dou thankyou for sharing this is da chit😁🤩
¡¡👍👍Excelent👍👍!!
thank you very much!
Where can i get those things to cut the hood?
you will have to buy a jewelry jigsaw on eBay, and you can buy wire bits, paper clips and cyanoacrylate glue at a hardware store.
What kind and size saw is that?
This is a jeweler's saw. This saw is used for making jewelry, saw size is 0.3mm.
@@VN_Customis the saw serrated or just a line of metal?
@@JoeFartolozithey are serrated. Easily chews through.
Whats the ñame of the saw you used?
I used a jewelry jigsaw with a #0 saw (0.1mm)