Grab some G54 merch here - www.en.garage5... A bit more on the water summer fun during these cold winter days. For business inquiries: promotion@garage54.ru
Here is an idea: An Amphibious Lada capable of doing 50 km/h on the water, such as what Gibbs did with the Aquada, designed by the Kiwis and British during the late-1990s and released in 2003.
These guys are the best Russia has to offer . I look forward to every show because there will ALWAYS be some great comedy and real fabricating and unpredictable outcome . :)
I have a 2012 Bayliner 170 with a 90 hp Mercury F90 four stroke on the back. It just made 40 mph during sea trials when I bought it. I like the boat, it is pretty basic and all we do is putter around at low speed in the Middle River in Fort Lauderdale. About once per year I get it completely warmed up and then I actually [illegally] bring it up on plane and go about 30 MPH just to get the carbon out of the engine. It is fuel injected, four cylinders, DOHC, 16 valves. So there really is no "carbon", the plugs always look clean, but I do it anyway. That Russian boat looks well built, but it also looks like they mounted the windshield of a Russian truck on the aluminum boat! The other odd thing is that the summer in Moscow is barely 90 days, so this must be an old video-
You can add U-joint between propeller shaft and engine. In case something gets out of alignment, it won't be catastrophic for engine, plus flexibility.
In Thailand, they have all sorts of car engines powering their boats. I've seen 4G63T, SR20DE (even T), a cute GA16DE, something out of a truck, an Isusu engine, etc. They decorate them more than the actual boats themselves ;)
@@TekkamanBiker yeah I know about Clarkson's Hilux they crossed the Channel in, my misunderstanding as that was an actual floating car not a boat engine swap but got it now 😁👍
My thoughts would be build a 1:2 prop system to take all that power and deliver it via two props linked to the single output shaft and your back end will really bite into the water then. Will give you a better straight line stability and to turn on the fly just knock power off for any sharp moves. Might need to have a deep rudder to give you a better turn radius. You could having the lathe etc to hand knock up a rudimentary output gearbox one which can handle the input from the engine, split the power and give you forward and reverse just by engaging a set of dogs, having a reverse is important as its the only way to brake without throwing out an anchor. Now if you put the thinking cap on, you could also introduce a bias where the steering is full over one way it cuts the power to that side prop so you can power round. I used to have a speedboat cruiser... right up to the point some bastard chainsawed the very expensive engine out its backside sinking my poor boat. After salvage I lost a fair bit of money on that poor thing as it was wrecked, never caught the git who done it but I battered the riverside pub owner who I paid to berth it and keep it secure grr grr
@@WolfmanDude Indeed - I was referring to many of their other projects - although hold your breath, they'll probably launch and me motoring around swimmers etc haha. Have you not seen the state of some of the cars they take out onto public roads.....
Why would that be ?... It's a four cylinder . Even if it wasn't, have you seen what a casale V-drive goes through running thousands of horses through ? I believe if that little V has good oil in it, it'll out live you and me . :) Plus, Russians don't build ANY thing wimpy . Look at your typical Lada . lol @@Guns_N_Gears
Boots often have a heat ex changer using coolant and "seawater" driven by a rubber impeller, these impellers can also be found in the tail of a outboard motor. Cool build you made there. What would happen if you would you a car's gearbox to drive the prop?
Originally aired in summer of 2020 so it's just old footage. Haven't seen him in any of the newer videos on the Russian channel. Pretty sure he left a while ago. Going from memory, I think his name is Kiril?
Next project, see how many lawnmower engines it takes to transplant into a lada . Recon you could get at least 6 , chain drive to the gearbox . Simples ❤
Don't be too disappointed if it doesn't go much faster. More power doesn't mean more speed unless you change the gearing. The gearing is the pitch of the prop.
Hay thanks for posting..I often thought of building a boat and using a old fashioned flat head engine from a old forklift that are getting rare now but simple and easy to rebuild with no extra moving parts from the over head valves.. have the boat hull made with built in wheels so I wouldn't need a boat trailer to pull it on and off the boat ramps.. home stead the boat, live tax free or pay a dock fee 😊😊 I've built barges and work boats when I was a steel fabricator years ago and wanted to retire on a homestead tugboat like a tow truck driver on water 😉
Can you imagine if you could get a Cummins 6.7 diesel in that boat? If it didn't sink from the weight it would probably stand straight up in the water and try to fly to the moon. Over 1000 HP and 1000 Flbs of torque.
A diesel has the big advantage that the fuel does not explode. With any gasoline powered inbord engine you have to be very careful to have no fuel leaks. A lot of power (torque) is a nice bonus.
Diesels have better fuel economy compared to gas per HP, so that would be a great idea. :) I am the guy who is all about being economical (though trying to take 5 minute showers instead of 15 minute ones), and can go on 20+ minute conversations about this type of stuff. Curious if lightweight aluminum or titanium-aluminum, or aluminum-iron alloy diesels exist.
The cooling system in my boat used the original water pump. Also used the lake water to cool the engine. Just remember to flush the cooling system when out of the water
That would be awesome, and the engine block could be named the Copperhead Engine, after that one reptile. Copper-right, or maybe copyright (c)2024 by e-moped Rouge & G54. :)
It's about Time Cero made a long overdue appearance,😉👍, he should actually be the main host of this channel by now, not that Vlad don't do a great job, he does,👍, but Cero more than deserves it, thanks for sharing guys.
Don't waste your time with a jet pump unless shallow water running is your goal. A surface drive prop straight out the back is the easiest way to get max top speed. A couple of A arms and knuckle from a car will give steering and trim.
In, the mid ninties, I worked at Hatteras yachts. My job, engine room, on the 65' convertible, fishing yacht. 2.5 million dollar boat. 2, V/16 Detroit diesel engines. We, used a tight piece of twine, for drive-line angle set-up.😃
This site is amazing mix. Some stuff seems like a hack , yet some stuff seems like SUCH precision to make things actually work. Garage54 never leaves me less than impressed. You guys are great!
Cover a car in stickers that look like normal paint and then later when you run from the cops you can peel the sticker off and you got a different color ride 😎
He told that he uses a water to water cooler. I do that too, because my boat runs in salt water. My heat exchanger is from Mercruiser. Isn't that from America too?
At 21:21 it looks like the exhaust oxygen sensor is placed after the exhaust gas cooler. That is probably not going to work well. Those sensors need to be hot to work properly. You might be lucky though.
Boat engine spin in the opposite direction putting a car engine in the the boat will be going backwards they going to have to get the propeller to spin in the correct direction.
Please do the exchange with the gearbox. I have always wanted to see if this thing actually works. I would place the engine in front of the boat and the gearbox behind.
When I bought my boat it had a 4 speed automatic gear box. This was very annoying. It does not make sense when it goes in kickdown when accelerating. Switching from forward to reverse makes an ugly sound because the propeller did not stop. I've thrown out the gear box and the propeller and use a jet-drive instead. The engine moved even a bit further back and makes a better balance now.
@@johannriedlberger4390 Well, it sounds like something was broken in your gearbox. I don't even want to see a kickdowns or going 100mph on water.. I just want to know if it works. No kickdowns just a simple cruise whit a boat.
Vlad and the lads should do more experiments out on the water 👍
It would be neat to see them make different props to see what will move them faster.
Yes!
Here is an idea: An Amphibious Lada capable of doing 50 km/h on the water, such as what Gibbs did with the Aquada, designed by the Kiwis and British during the late-1990s and released in 2003.
You need a T-shirt that says "Vlad and the Lads" and has images of the wild things you guys built over the years haha
These guys are the best Russia has to offer . I look forward to every show because there will ALWAYS be some great comedy and real fabricating and unpredictable outcome . :)
As a 1JZ owner, and a boat owner, this episode combines both things I love.
I have a 2012 Bayliner 170 with a 90 hp Mercury F90 four stroke on the back. It just made 40 mph during sea trials when I bought it. I like the boat, it is pretty basic and all we do is putter around at low speed in the Middle River in Fort Lauderdale. About once per year I get it completely warmed up and then I actually [illegally] bring it up on plane and go about 30 MPH just to get the carbon out of the engine. It is fuel injected, four cylinders, DOHC, 16 valves. So there really is no "carbon", the plugs always look clean, but I do it anyway.
That Russian boat looks well built, but it also looks like they mounted the windshield of a Russian truck on the aluminum boat! The other odd thing is that the summer in Moscow is barely 90 days, so this must be an old video-
This is great! It reminds me of the movie "One Crazy Summer" with John Cusack & Demi Moore, where they drop a Ferrari engine into a boat!
you touched my boat.. what? YOU TOUCHED MY BOAT! #CULATER
that was an awesome movie.. I remember that well 👍
You can add U-joint between propeller shaft and engine.
In case something gets out of alignment, it won't be catastrophic for engine, plus flexibility.
Man, I miss Cyrill and some of the old lads. I hope they're doing fine after the departure.
They are on the front
In Thailand, they have all sorts of car engines powering their boats. I've seen 4G63T, SR20DE (even T), a cute GA16DE, something out of a truck, an Isusu engine, etc. They decorate them more than the actual boats themselves ;)
Ah, the Toybota 2.0!
🤔2.5l
@@shaneeslick Version 2.0, not 2.0 l. Top Gear built the original Toybota.
@@TekkamanBiker yeah I know about Clarkson's Hilux they crossed the Channel in,
my misunderstanding as that was an actual floating car not a boat engine swap but got it now 😁👍
My thoughts would be build a 1:2 prop system to take all that power and deliver it via two props linked to the single output shaft and your back end will really bite into the water then. Will give you a better straight line stability and to turn on the fly just knock power off for any sharp moves. Might need to have a deep rudder to give you a better turn radius. You could having the lathe etc to hand knock up a rudimentary output gearbox one which can handle the input from the engine, split the power and give you forward and reverse just by engaging a set of dogs, having a reverse is important as its the only way to brake without throwing out an anchor. Now if you put the thinking cap on, you could also introduce a bias where the steering is full over one way it cuts the power to that side prop so you can power round. I used to have a speedboat cruiser... right up to the point some bastard chainsawed the very expensive engine out its backside sinking my poor boat. After salvage I lost a fair bit of money on that poor thing as it was wrecked, never caught the git who done it but I battered the riverside pub owner who I paid to berth it and keep it secure grr grr
Lada axle. Gotcha
Much love from UK 🇬🇧 love your videos keep up the good work
You guys are geniuses. Cheers from Sterling Heights Michigan USA!🇺🇸🫡🫵
Don't worry about re-caulking the hull. Just drive faster than the water seeps in.
I know about this little bits and pieces. My project boat has a 1UZ and a Berkeley pump. Boat runs nice, but now I am doing an engine rebuild.
This is exciting, love seeing these types of project's.
HAVE A 2JZ SWAP FOR A LADA!!!
It would make the experiments SO MUCH better.
So resourceful - This stuff often looks sketchy from a safety perspective, but the fabrication and ingenuity amazes me
This project looks pretty good from a safety perspective. If they did the fuel system right this will be as save as any regular boat!
@@WolfmanDude Indeed - I was referring to many of their other projects - although hold your breath, they'll probably launch and me motoring around swimmers etc haha. Have you not seen the state of some of the cars they take out onto public roads.....
Joe Zolper is a great master mechanic in my eyes, love the show guys.
Actually no one's a slouch in this crew . They're all pretty well versed in what they do . :)
I would be suspect of that V-drive after the swap
Why would that be ?... It's a four cylinder . Even if it wasn't, have you seen what a casale V-drive goes through running thousands of horses through ? I believe if that little V has good oil in it, it'll out live you and me . :) Plus, Russians don't build ANY thing wimpy . Look at your typical Lada . lol @@Guns_N_Gears
Boots often have a heat ex changer using coolant and "seawater" driven by a rubber impeller, these impellers can also be found in the tail of a outboard motor.
Cool build you made there.
What would happen if you would you a car's gearbox to drive the prop?
I don't know what his name is but it's nice to see the guy in the red and grey on this channel again! (Like at 6:34 )
I think Cyril, and probably conscripted to the Russian army.. likely dead in Ukraine
Originally aired in summer of 2020 so it's just old footage. Haven't seen him in any of the newer videos on the Russian channel. Pretty sure he left a while ago. Going from memory, I think his name is Kiril?
@@kunka592 Да, его зовут Кирилл!
13:00 Yes Russia and Japan are close friends! Thank you for the entertaining show. Greeting from Japan 🇯🇵
The weekend water sports scene of the summer in Chelyabinsk with high life mainfloor house music
Can't wait to see this thing on the water!
I love how where iam rn in ontario Canada. We have snow but they have summer. Send that warm weather back this way
Next project, see how many lawnmower engines it takes to transplant into a lada . Recon you could get at least 6 , chain drive to the gearbox . Simples ❤
Don't be too disappointed if it doesn't go much faster. More power doesn't mean more speed unless you change the gearing. The gearing is the pitch of the prop.
Can't wait to see it this spring or summer Vlad! This will be a fun project
1:12 "super Saiyan form" heck yah!!
one the best videos of garage history ❤🎉
The engine previous to JZ, the 7m, was in a lot of cigarette boats back in the day
Hay thanks for posting..I often thought of building a boat and using a old fashioned flat head engine from a old forklift that are getting rare now but simple and easy to rebuild with no extra moving parts from the over head valves.. have the boat hull made with built in wheels so I wouldn't need a boat trailer to pull it on and off the boat ramps.. home stead the boat, live tax free or pay a dock fee 😊😊 I've built barges and work boats when I was a steel fabricator years ago and wanted to retire on a homestead tugboat like a tow truck driver on water 😉
Weather looks great for this time of year!
Can you imagine if you could get a Cummins 6.7 diesel in that boat? If it didn't sink from the weight it would probably stand straight up in the water and try to fly to the moon. Over 1000 HP and 1000 Flbs of torque.
A diesel has the big advantage that the fuel does not explode. With any gasoline powered inbord engine you have to be very careful to have no fuel leaks. A lot of power (torque) is a nice bonus.
Diesels have better fuel economy compared to gas per HP, so that would be a great idea. :) I am the guy who is all about being economical (though trying to take 5 minute showers instead of 15 minute ones), and can go on 20+ minute conversations about this type of stuff. Curious if lightweight aluminum or titanium-aluminum, or aluminum-iron alloy diesels exist.
Hey you guy’s! How about putting a manual transmission on the boat engine? That would be awesome! 👌😂👍shifting through the water!!
The cooling system in my boat used the original water pump. Also used the lake water to cool the engine. Just remember to flush the cooling system when out of the water
Love that old boat. So cool
Only Vlad can upload years old videos:)
But i love that project already!
All it needs is twinturbo kit iam really curious how fast it can be.
Put your four engines into it. That would be awesome.
I have a suggestion for the next project. Can you melt down copper and turn it into an engine block?
Blud, that will cost wayyy to much 😂😂😂😂😂😂😂😂😂😂😂😂
That would be awesome, and the engine block could be named the Copperhead Engine, after that one reptile. Copper-right, or maybe copyright (c)2024 by e-moped Rouge & G54. :)
do another build like this. as in ijz or similar into a lada. luv from new zealand
It's about Time Cero made a long overdue appearance,😉👍, he should actually be the main host of this channel by now, not that Vlad don't do a great job, he does,👍, but Cero more than deserves it, thanks for sharing guys.
Why not Turbo it? would make a sick boat :D and what about submerging a radiator in the water to cool it?
Don't waste your time with a jet pump unless shallow water running is your goal. A surface drive prop straight out the back is the easiest way to get max top speed. A couple of A arms and knuckle from a car will give steering and trim.
4 pistons to 6 pistons 60hp to 270hp wow thats a big difference
to double the speed in the water you need 8 times the power. But it is fun.
In, the mid ninties, I worked at Hatteras yachts. My job, engine room, on the 65' convertible, fishing yacht. 2.5 million dollar boat. 2, V/16 Detroit diesel engines. We, used a tight piece of twine, for drive-line angle set-up.😃
GET READY TO PUT ON A WAY MORE AGGRESIVE PROPELLER. the old one will only cavitate with the new motor.
Quickest “hey there fellas” so far. I doff my hat sir 👍
Can you start an engine in the opposite direction. Maybe reverse polarity on the starter or something
Marinating shorty with the boat engine is always an option for another day hey 👋 😅
You guys are the greatest!!!
You guys should put a huge 2-stroke outboard engine in a Lada.
15:31, 16:48 - 1JZ Start-up sounds! 🔊😌😌
I have seen the video you use a starter motor on a turbo and wondered about have ever using a turbo to pump up tires?
That cabin section looks suspiciously like it was ripped from a truck
Toyota wants to hire you guys
This site is amazing mix. Some stuff seems like a hack , yet some stuff seems like SUCH precision to make things actually work. Garage54 never leaves me less than impressed. You guys are great!
Yup cool engine swap! Don’t need mufflers on the engine, just straight pipe it! 🙂👍 Then will be a gnarly sounding boat on the water! 🙂👍
You should drive it down the Dnipro river!
Great video guys can’t wait to see it in the water 👍
Shorty needs a Mazda 20b with
peripheral port injection. 🙂
Love it.Can't wait to see it plane.Well done!
What is that Lada Skyline doing in the background? Film a video of it!! Blyat!!! 😅
Cover a car in stickers that look like normal paint and then later when you run from the cops you can peel the sticker off and you got a different color ride 😎
BMI Russian's 'hey there fellas' is getting faster every upload
Please make an LS canoe
Love to see a new paint job on the boat.
You don’t need to do any calculations for the cooling system. Just use the water that the boat is sitting in :)
Like we do in America!
He told that he uses a water to water cooler. I do that too, because my boat runs in salt water. My heat exchanger is from Mercruiser. Isn't that from America too?
Love the music he puts in goes hard with his vids
a boat with paddle shifters on the steering wheel !
That is dirt cheap for a used motor. I look forward to seeing it on the water!
You guys are so crafty💡
I see an old school Rover in the background.. maybe the 800?
Love the tiger shirt vlad
I can tell you are getting close to making an akronoplan from a lada.
A used 1JZ for 8,000 Ruble? THAT'S ABOUT £70! Right, time to engine swap my 2007 Fiat Grande Punto 1.2 8V !!! 🤔😉🤣🤣🤣
😎🇬🇧
1JZ 80 000-150 000 Ruble
This kind of video WILL get you views ❤️💯
Noticed the sign, car wash and detail and the guys shirt was in English. Seems there is a lot of signs in English
800-1200 rubles for a 1jz vvti. That's $10.00-$13.50. An engine for $10 would be wild.
1JZ 80 000-150 000 rubles
At 21:21 it looks like the exhaust oxygen sensor is placed after the exhaust gas cooler. That is probably not going to work well. Those sensors need to be hot to work properly. You might be lucky though.
"Shorty will live on" but I haven't seen Shorty since.
This is a awesome channel 👏
Want the UPDATE!!
Vlad is the best. USA loves Vlad.
I like that truck windshield on the boat.
Now you have to take that engine out and put a barra in . The Barra is a better engine in every way.
Make pistons from rock like marble or slate pleasings
Can wait to see this contraption on the water.😂
I appreciate the aspect ratio pretty much fits my phone perfectly.
Boat engine spin in the opposite direction putting a car engine in the the boat will be going backwards they going to have to get the propeller to spin in the correct direction.
Wild this look exactly the Lexus 2jz but no etcs-I?
You should Ls swap shortly
That boat looks like a car Vlad
15: 32 is the guage cluster from Moskovich, Toyota or Mercedes?
About time !!
Please do the exchange with the gearbox.
I have always wanted to see if this thing actually works.
I would place the engine in front of the boat and the gearbox behind.
When I bought my boat it had a 4 speed automatic gear box. This was very annoying. It does not make sense when it goes in kickdown when accelerating. Switching from forward to reverse makes an ugly sound because the propeller did not stop. I've thrown out the gear box and the propeller and use a jet-drive instead. The engine moved even a bit further back and makes a better balance now.
@@johannriedlberger4390 Well, it sounds like something was broken in your gearbox.
I don't even want to see a kickdowns or going 100mph on water.. I just want to know if it works. No kickdowns just a simple cruise whit a boat.
The translation into Arabic is very good from Russian by the translator.😊
Am i seeing right......that looks like a r34 skyline of sorts 😳 😮in the corner 🤔
2 jz with 1jz head bored 4.0 4.2 liter billet aluminum block with 78 mm turbo yup or 85 mm
Why can't they use the water pump that originally came with the engine, or it's made for the engine, that runs the coolant system
This is an old one, you can see the old projects in the shop.
Forgot about the yellow swiss cheese lada 😂