Just bought a mk1 and I was a little scared cause I had a 03 A4 before and I couldn’t find anyone doing videos or support shit for it, so I figure the TT would be worse, but y’all are on point. Helped me realize a couple things that were wrong before buying it and also helped me understand hm work n money I’m looking at for everything. Keep it up y’all deserve mad props
You all probably dont give a damn but does anybody know of a tool to get back into an Instagram account?? I was dumb lost the login password. I would love any tricks you can offer me!
Enfig makes an adapter for Bose stereos. While it is rather expensive ~$100USD, it is plug and play, gets rid of the "pop" sound upon start up, and they make can bus to radio adapters for near any headunit you would ever put in your TT.
Great Video! Got a 180 a few months ago, but the car was so immaculate (everything works on it), Nagarro Blue like his, I chipped the the tuning and lowered the springs, Bilsteins all around and 4 new P4's. I'm loving this car. The small thing after painting the calipers red, was 4 Audi tire valve (Audi rings) covers in blue to match the paint. looks choice.
Nice colour choice! Where in the world are you from? The Nogaro blue is quite a rare option so did well to get one. Sounds like you did all the right mods to really enhance the overall performance
Nice video mate! The honeycomb diffusors were part of the S-Line exterior package, which could be ordered optionally when the TT 3.2 was introduced. The 3.2 models and later also the Quattro Sport had all those parts fitted by default. Alternatively, they could be ordered seperately from Audi either in satinblack (S-Line, 3.2) or painted in phantomblack (QS). Cheers!
Great suggestions. A popular stealth option on the forums for the airbox is what they call the "WakBox" - involves drilling some holes in the bottom of the OEM airbox to increase flow. Other ideas: as with the front grilles, perhaps a regurb of the wheel arch liners? Also, some nice stainless steel dress-up kits for the engine bay to replace all the broken fixings.
Robert Rawlins thank you, I had something similar to this when I started, it’s a great option if you like that stock look. I think I need to do a video on engine dress up and options for swapouts of nice bits and bobs. Appreciate the comment 👍🏻
Hi love your channel gteat tips and I've got a 1.8t bug could you show me how to ad a boost gauge as most people are routing through the fuel pressure valve and I know that's not right thanks for any advise you can give
Gordon Jewell hey Gorgon, I’ve done a video on fitting one into the vent. Then in the description is 2 links to bws tt channel as he has done 2 very good videos showing fitting. You can use any of the small vac lines as a feed if you use a t piece and the pipe is the same size all round. My video is called: How To Remove Air Vent On Audi TT Mk1 & Dismantle To Fit Boost Gauge Or Paint
Alot of the TT have a apple connector in the glove box. You can get a bluetooth receiver that plugs direct to the apple connector and it sends your music direct to the stereo not over radio waves so no crappy interference.
That’s good to know, unfortunately mine didn’t come with one. The radio adapter I have you can change the channel so makes it easier to find one with very little or no interference
Lots of good ideas but I got on Amazon for my 2004 Audi TT was a Bluetooth adapter that uses the cd changer and your factory wiring took me five minutes plug and play Crux BTS-VW1 Bluetooth Music Streaming
That’s a great shout, I wanted to focus on the mechanicals. Was going to look into interior modifications later down the line. Will keep that info for the future
Dennis Alberts great shout with the side repeaters, don’t think they would suit the blue on mine but have seen them on others and very popular. V6 spoiler is on the list just need to go and pick it up and get it painted 💙. Thanks for your input 👍🏻
@@TheParrottBros Hit me up, if you need advice on removing/mounting the spoiler. I've done it recently. It can be quite tricky. @unvermeidbarer_verfall on Instagram
Very helpful videos 👍🏽 I have a 225 in nogaro blue as well, and I get quite a bit of interior plastic trim rattle from around the boot area. It could also be the rear seats but I need to investigate properly. Wondering if you had any tips to resolve this please?
Thank you, aww no way that’s cool!! Yeah sure best thing I would do is check spare wheel and tools are tight. Once ruled that out give everything a pull and see if anything is loose as often when people remove trim they break the clips thus giving mite chance of rattle. Also check the rear parcel shelf as very common tabs break. Failing all of the above remove them one by one
will look into getting a turbo gauge and an oil pressure gauge for the mk1 S3 after watching this video i will get on ebay now lol ps also need a front mount intercooler being installed.. once again thanks for your video Bro Bless
Full respect Bro I luv the 1.8t BAM platform always learning me and will never sell my mk1 S3.. its also good to watch some 1 from the UK with decent videos on the VAG engines who know what they are talking about... BLESS BRO
Thanks fella, warning that watching my videos will like cause you to spend money and lot of time on your car but you’ll never be unhappy 😂 thanks for the kind words. That’s why I do it, take a look on our website too, it’s pretty basic at the moment but will be built up over time and soon to have an interactive blog/ chat section too. Www.theparrottbros.co.uk
Hey, I’ve never had any personal experience with it but it takes away from what the system is, I’ve heard it’s good for track use if that’s your plan with it
There is loads of things to check. Do all the basic checks first, MOT service history had a timing belt recently, check for oil leaks check that it boosts well when you accelerate and no funny noises. Make sure 4wd system works if Quattro, rocker gaskets leak. Cheap and easy fix, loads of possible boost leaks. Clutch is expensive if 4wd so check that yoo
Hi. i recntly bought an Audi TT 2008. The hood release lever was broken, so i decide buy another one and this is break again. Will there be an aluminum release lever?
Hello sir - new to the channel here. Im looking to buy a TT but im from denmark so the prices are astronomical compared to UK. Would you say a 225 is worth 40% the price over the 180? btw fun fact: the cheapest TT 180 in denmark is around 6000 pounds
Wow that’s mad! I guess it’s priced on supply and demand. Less of them means cost more. In England they are everywhere. It all depends what you want it for. The 180 is great, very nippy as smaller turbo so less lag, if your not looking to change loads and spend thousands in tuning the 180 is fine. Will still go fast enough to get you a speeding ticket. If your a speed nut then get the 225 as much more tuning potential. Thanks for watching
I have a question to ask: The back panel in the booth makes a crazy squeaky sound...that drives me crazy. I tried to fix it with strong glue but didn't make any difference... Do you have a suggestion? There must be other people with the same problem. Tell me I'm not alone 😀 FYI: I already purchased a new one but couldn't solve the problem. Thank you Mike
Hey mate, thank you for these videos, they're really helpful! I'm trying to pick an all-weather first car for visiting home and having fun and a TT is high on the list. Hopefully will test drive one I found on autotrader this weekend. Q: Will mods such as the new air filter, exhaust swaps and getting the engine tuned have a large impact on insurance? My current quote with no mods is just under 600 quid
Louis Heath usually anything performance enhancing have a cost impact on any policy. But quite a few company’s don’t charge too much more for them so it’s worth asking. People like Adrian flux, admiral etc
@@TheParrottBros ah, thought so .. luckily admiral is my lowest quote atm but I'll check out Adrian flux, thanks ! Also, how do you find motorway driving in the TT? That's currently the main thing making me consider something more boring like a mk6 golf..
@@louisheath2791 You would have to take one for a test drive to see if its suitable for you, I love it but everyone is different, they are old cars now and will need some upkeep where as say a mk6 may not soo much and also has more creature comforts.
@@TheParrottBros true, I'm not too fussed about driving in complete plush and I kind of want to tinker a bit too. Going to see one in Hatfield tomorrow .. it's just over £3k but looks in good nick. Fingers crossed !
Great video I have most of the mods you mentioned another good one is the illuminated h gate gear stick surround and lockwood white dials,look forward to you're next upload 👍
Thanks for the comment mate, I probably won’t do much to the gearshift as in the future I would like to fit A shift tower 😎. Thanks for watching and commenting
@@stuartwinstanley4949 perfect fit? I was filing mine down for hours and 1st and 2nd still scrapped badly on it and were under a lot of pressure when in gear.
@@TheParrottBros Yep, found it, thanks. Would it be better to buy the 180hp version or try fitting the 225hp version for max performance? Don't know if the ECU will adapt to a bigger size maf sensor though. Anyway, thanks for your reply. :)
An fyi.... the American tt has 2 small aluminum cup holders between the seats. Maybe that's something you could source from the state for a factory feature. Living your videos, trying to buy my family's 04 1.8 vert. Original Los Angeles Ca car. Just sets in the garage its whole life, still under 50k miles on it. It's mint.
You can purchase a cup holder in the UK but they change hands for in excess of 90-100£. That’s why I made a budget option for those who can’t afford / don’t want an expensive one. ( I believe they were a optional extra) Yeahs that sounds like a gem of a car, I would love to have a Cali car with low miles 😍
@@TheParrottBros oh wow. No, I sophistication pay that much. Update on trying to buy the TT. I made the deal yesterday. $4k Very excited about it. First thing on the list is timing belt/ water pump.
DeCampers the part is like £30. And if your having a service they will have already dropped your oil out. The only thing they can charge you for is dropping the sump off and swapping the pipe over / cleaning the existing one up a little 👍🏻
@@TheParrottBros thanks for replying mate. All the ebay items do not fit the TT MK1. There are genuine original ones that do but cannot find in red and black. I even thought about sticking one on the existing but again the MK1 badges seem to be bigger. Mine is 75mmx10mm. Most are 68mm.
@@MrGrinch52 ooo ok then yeah it’s not a genuine part for a MK1 tt so wouldn’t be able to help sorry buddy. Stock only come in black / silver. Anything else is likely to require modification
Why does every video about fitting a boost gauge in an air vent start with '.. so here's the vent with all the insides removed...' How? I've been trying to work it out without damaging the housing, almost stuck a screw driver in my hand several times!! Any tips?? 😫
@@TheParrottBros ... Cheers, figured it out just after I posted this. Spent several hours taking dashboard out, plumbing in the hose and wiring, fixing the gauge into the air duct only to find the on starting up the gauge reads nothing .. checked all wiring, checked there vacuum on the hose but gauge doesn't do anything... Now I remember why nowadays I usually pay people to sort my car stuff out!... This is my second gauge to, the first one arrived on 0.5 bar... Sent back and bought a slightly more expensive one
Sick video mate, I bought a mk1 TT last year and it’s good to see someone documenting everything there doing, and the how to vids are great. Will be doing some of these soon
Mines black, 1.8T, 180 Quattro. Good little runner to be fair, very fun to drive. 100% going to do the cup holder and going to look into doing other stuff to
The Parrott Bro’s I don’t know if you’ve come across it, but on my TT the head lights have got a bit of condensation inside the lens, I’ve tried taking the bulb caps off so the water can evaporate but it’s been in there so long it’s clouded the inside of the lens. Is there anything you would recommend?
Martyn Hayes you can take the heat lights out and split them and re seal, but that’s Quite a big job, can take bulb out and use a hair dryer to clear. Then drill a small hole in bottom of the lights to allow moisture to escape I’ve heard that works too. It’s not an issue I’ve had to deal with for a long time to be fair.
Ok, so just received my boost gauge and out of the box the needle is well above zero.. I'm guessing it should be exactly on zero when not fitted. Can anyone help me on this? Cheers!
How far of zero are we talking, my one since a couple of psi off but when running is accurate, usually they come from zero have you contacted the seller?
@@TheParrottBros it was sat on 0.5 bar. I 'jogged' it and the needle eventually went to zero, but having googled it, seems like it should arrive on zero really. Not sure I want to fit it just to have to take it out to send it back if it's still f#cky!
Nick temp fit it, just add it into the vac system in the bay then turn the car on. Should pull about -20psi. Or just using a long bit of vac hose plumb it in and run pipe out of bonnet and through window and go for a drive see what it reads
My TT has the proper cup holder in it and also the official arm rest which I've not seen on other cars. I've seen them for sale on eBay for £200+! To fit the arm rest half of the cup holder has to be cut off though
Nick mmm an armrest would be lovely. Yeah have seen a few, but have never justified spending the money to get one. I’ve seen genuine cup holders sell for over £100 so if you don’t have one the cheaper options are certainly more appealing
Buying stuff off eBay glad to hear it people are like fuck ebay the stuffs shit they obviously don't realise that most companies sell on ebay not just the usual chancers
My dream car is an Audi TT---one day. I really like everything you say about Audi TT.
Thank you for the kind words, they are a fantastic car with a brilliant community
Just bought a mk1 and I was a little scared cause I had a 03 A4 before and I couldn’t find anyone doing videos or support shit for it, so I figure the TT would be worse, but y’all are on point. Helped me realize a couple things that were wrong before buying it and also helped me understand hm work n money I’m looking at for everything. Keep it up y’all deserve mad props
thanks bro appreciate all the support, yeah plenty of info on the channel and anything you cant find just drop me a line
thanks Dom
Silicone hoses a great and cheap upgrade. Change as many as you can ASAP, will save you a ton of trouble!
Haha your not wrong, the hoses perish both coolant and Pcv! Great shout. Thanks for commenting and watching
This is the video all TT owners need to see. Very informative and on point! Keep up the good work.
You all probably dont give a damn but does anybody know of a tool to get back into an Instagram account??
I was dumb lost the login password. I would love any tricks you can offer me!
@Randy Elliott instablaster ;)
I’ve had my Mk1 TT Roadster 4 years now and wouldn’t swap it for anything. Loving your videos by the way with some great ideas 🍻
Thank you for the kind words 😁 glad your still enjoying iTT
Thanks for the video, thinking of buying a 225 this week so your channel is helpful👍🏻
Glad you enjoy it, thank you for watching and commenting
Enfig makes an adapter for Bose stereos. While it is rather expensive ~$100USD, it is plug and play, gets rid of the "pop" sound upon start up, and they make can bus to radio adapters for near any headunit you would ever put in your TT.
Great Video! Got a 180 a few months ago, but the car was so immaculate (everything works on it), Nagarro Blue like his, I chipped the the tuning and lowered the springs, Bilsteins all around and 4 new P4's. I'm loving this car. The small thing after painting the calipers red, was 4 Audi tire valve (Audi rings) covers in blue to match the paint. looks choice.
Nice colour choice! Where in the world are you from? The Nogaro blue is quite a rare option so did well to get one. Sounds like you did all the right mods to really enhance the overall performance
You made my day with the bluetooth radio emitter. The best thing ever, can finally listen to good music in the new TT
Glad to be of help! Thanks for watching and commenting
Just got mine delivered today from Amazon
Great channel mate! Thanks for the support @garagebuds!!
Thank you and it’s my pleasure
Nice video mate! The honeycomb diffusors were part of the S-Line exterior package, which could be ordered optionally when the TT 3.2 was introduced. The 3.2 models and later also the Quattro Sport had all those parts fitted by default.
Alternatively, they could be ordered seperately from Audi either in satinblack (S-Line, 3.2) or painted in phantomblack (QS).
Cheers!
I had a feeling it was something like that. Thanks for the info appreciate the input. Thanks for watching 👍🏻
Hey, no problem!
Great suggestions.
A popular stealth option on the forums for the airbox is what they call the "WakBox" - involves drilling some holes in the bottom of the OEM airbox to increase flow.
Other ideas: as with the front grilles, perhaps a regurb of the wheel arch liners?
Also, some nice stainless steel dress-up kits for the engine bay to replace all the broken fixings.
Robert Rawlins thank you, I had something similar to this when I started, it’s a great option if you like that stock look. I think I need to do a video on engine dress up and options for swapouts of nice bits and bobs. Appreciate the comment 👍🏻
The Parrott Bro’s , I think might be really interesting this matter.
I just bought an audi tt mk1 a month ago so I just want to say that your videos have been very helpful 🙏🔥🔥
Welcome aboard! Glad the videos are still getting put to good use 🙂
Hi love your channel gteat tips and I've got a 1.8t bug could you show me how to ad a boost gauge as most people are routing through the fuel pressure valve and I know that's not right thanks for any advise you can give
Gordon Jewell hey Gorgon, I’ve done a video on fitting one into the vent. Then in the description is 2 links to bws tt channel as he has done 2 very good videos showing fitting. You can use any of the small vac lines as a feed if you use a t piece and the pipe is the same size all round.
My video is called:
How To Remove Air Vent On Audi TT Mk1 & Dismantle To Fit Boost Gauge Or Paint
Alot of the TT have a apple connector in the glove box. You can get a bluetooth receiver that plugs direct to the apple connector and it sends your music direct to the stereo not over radio waves so no crappy interference.
That’s good to know, unfortunately mine didn’t come with one. The radio adapter I have you can change the channel so makes it easier to find one with very little or no interference
@@TheParrottBros I woudl check in behnd the stereo the 2002 that i had someone had done some work on it and the cable was pulled in behind.
Lots of good ideas but I got on Amazon for my 2004 Audi TT was a Bluetooth adapter that uses the cd changer and your factory wiring took me five minutes plug and play Crux BTS-VW1 Bluetooth Music Streaming
That’s a great shout, I wanted to focus on the mechanicals. Was going to look into interior modifications later down the line. Will keep that info for the future
Cool ideas, I’d the phone holder awhile ago awesome. Will be redoing headlight lens covers and upgrade lighting,wish me luck . I’m in USA, later
Good luck buddy, thanks for the kind words. Let us know how you get on
Great video, got almost everything done to my car that you mentioned. Black side indicators are also a little mod. V6 spoiler.
Dennis Alberts great shout with the side repeaters, don’t think they would suit the blue on mine but have seen them on others and very popular. V6 spoiler is on the list just need to go and pick it up and get it painted 💙. Thanks for your input 👍🏻
@@TheParrottBros Hit me up, if you need advice on removing/mounting the spoiler. I've done it recently. It can be quite tricky.
@unvermeidbarer_verfall on Instagram
Top man
Cheers for the links dude. I just bought the cig lighter Bluetooth and amazon have got a deal on at the moment so it was only £11:99 delivered 👌🏼
Stop it! What a result!! Thanks for watching
Amazing video, needed this for my 1.8
Thanks bud
I av a 225 tt when fuel gauge show three quarters full miles left gauge says 300 miles to go is this about right
Yeah sounds about right to me bud
Nice one Dom.. great video chap!!💯👍🏼
Marco Mesenti thanks dude 👌🏻
grom audio makes a bluetooth kit for the stock stereo, plug and play a bit on the expensive side about 200 USD i believe
Cd I wish still have the tape on my radio and just ruined my only tape great video Dom
Bluetooth transmitter great idea !
thanks buddy, not the most sophisticated technology but works like a dream
Very helpful videos 👍🏽 I have a 225 in nogaro blue as well, and I get quite a bit of interior plastic trim rattle from around the boot area. It could also be the rear seats but I need to investigate properly. Wondering if you had any tips to resolve this please?
Thank you, aww no way that’s cool!! Yeah sure best thing I would do is check spare wheel and tools are tight. Once ruled that out give everything a pull and see if anything is loose as often when people remove trim they break the clips thus giving mite chance of rattle. Also check the rear parcel shelf as very common tabs break. Failing all of the above remove them one by one
will look into getting a turbo gauge and an oil pressure gauge
for the mk1 S3 after watching this video i will get on ebay now lol
ps also need a front mount intercooler being installed..
once again thanks for your video Bro Bless
Full respect Bro I luv the 1.8t BAM platform
always learning me and will never sell my
mk1 S3.. its also good to watch some 1
from the UK with decent videos on the VAG
engines who know what they are talking
about... BLESS BRO
Thanks fella, warning that watching my videos will like cause you to spend money and lot of time on your car but you’ll never be unhappy 😂 thanks for the kind words. That’s why I do it, take a look on our website too, it’s pretty basic at the moment but will be built up over time and soon to have an interactive blog/ chat section too. Www.theparrottbros.co.uk
Im watching this again.... Bet ya Im not the only mk1 TT owner to do so. :)
Heres hoping it all adds up to you making more rad content.
:)
I do the same, watching old videos to see if i missed anything and for more creative ideas :)
Great info man, keep the videos coming!
Jeff0000 thanks buddy
Hello Dominic; I was wondering what are your thoughts about the Haldex power track insert, please?
Hey, I’ve never had any personal experience with it but it takes away from what the system is, I’ve heard it’s good for track use if that’s your plan with it
@@TheParrottBros for road use do you think the Haldex is a very good device?
@@guitariste47 it’s brilliant at what it does yes, if your after more drive from the rear I would look at the haldex controller by hca
Hi mate just bought a 05 plate TT 1.8T just wanted to know a few bits about it. And how to really look after it.
Hey, plenty of videos on the channel going through most bits on the car, if you have any questions I’m here
Thanks pal I’ve got one problem my indicators sticks on but my hazard lights flash. Is there a quick fix or will I need to run it in
Have you got a Facebook page pal
@@markmather4662 yea, instagram, fb & website
@@markmather4662 you need a new hazard switch, the hazard switch acts as a relay as well,
My front grills need painting , do I need to take the bumper off to get them out ?
No they simply pull out, if you have a look on the channel there is a video on how to remove them
Im just about to get a tt whats the main things to look out for on them any help would be great cheers
There is loads of things to check. Do all the basic checks first, MOT service history had a timing belt recently, check for oil leaks check that it boosts well when you accelerate and no funny noises. Make sure 4wd system works if Quattro, rocker gaskets leak. Cheap and easy fix, loads of possible boost leaks. Clutch is expensive if 4wd so check that yoo
Nice one mate. Love the video very informative. Thanks.
Glad you enjoyed it, thanks for watching
Hi. i recntly bought an Audi TT 2008. The hood release lever was broken, so i decide buy another one and this is break again. Will there be an aluminum release lever?
I couldn’t tell you I’m afraid, I no very little about the Mk2. I would have a look on the tt forum, your likely to find the answers there
Great video mate 👍
Simon Plimbley thanks buddy
good stuff! git the phone setup, really nice quality. the cold air is something of interest. did you do any exhaust work?
I have a full turbo back exhaust system, 3” pipewerx downpipe and sports cat. And a power flow custom cat back
Great video buddy
Thanks garage buds 👍🏻
My TT has cup holders did some version come with them
The cupholder was an additional extra that could be purchased at the time of the car being new
@@TheParrottBros I never knew that I thought they all came with it mines the baseball glove interior I wonder if thats why
Super helpful, thanks
Thanks For commenting
We won’t tell the Mrs. that you take dumps in there either ;;)
Hello sir - new to the channel here.
Im looking to buy a TT but im from denmark so the prices are astronomical compared to UK. Would you say a 225 is worth 40% the price over the 180? btw fun fact: the cheapest TT 180 in denmark is around 6000 pounds
Wow that’s mad! I guess it’s priced on supply and demand. Less of them means cost more. In England they are everywhere. It all depends what you want it for. The 180 is great, very nippy as smaller turbo so less lag, if your not looking to change loads and spend thousands in tuning the 180 is fine. Will still go fast enough to get you a speeding ticket.
If your a speed nut then get the 225 as much more tuning potential.
Thanks for watching
I have a question to ask:
The back panel in the booth makes a crazy squeaky sound...that drives me crazy. I tried to fix it with strong glue but didn't make any difference...
Do you have a suggestion?
There must be other people with the same problem. Tell me I'm not alone 😀
FYI: I already purchased a new one but couldn't solve the problem.
Thank you
Mike
try and work out where its coming from and put some foam tape there to stop the friction, usually works
Really nice video, well done 👍
Thanks buddy
Hey mate, thank you for these videos, they're really helpful!
I'm trying to pick an all-weather first car for visiting home and having fun and a TT is high on the list. Hopefully will test drive one I found on autotrader this weekend.
Q: Will mods such as the new air filter, exhaust swaps and getting the engine tuned have a large impact on insurance? My current quote with no mods is just under 600 quid
Louis Heath usually anything performance enhancing have a cost impact on any policy. But quite a few company’s don’t charge too much more for them so it’s worth asking. People like Adrian flux, admiral etc
@@TheParrottBros ah, thought so .. luckily admiral is my lowest quote atm but I'll check out Adrian flux, thanks !
Also, how do you find motorway driving in the TT? That's currently the main thing making me consider something more boring like a mk6 golf..
@@louisheath2791 You would have to take one for a test drive to see if its suitable for you, I love it but everyone is different, they are old cars now and will need some upkeep where as say a mk6 may not soo much and also has more creature comforts.
@@TheParrottBros true, I'm not too fussed about driving in complete plush and I kind of want to tinker a bit too. Going to see one in Hatfield tomorrow .. it's just over £3k but looks in good nick. Fingers crossed !
@@louisheath2791 Ooo nice, let me know how you get on, good luck :)
Good video! I have a modified TT mk1 and i am looking for the same 3-bar grill for my TT. Do you have the part number? Thank you
Fabio Cordeiro 8N0 853 653B give that a search, should be what you’re after
The Parrott Bro’s Thank you very much, great help
Fabio Cordeiro no problemo
Great video I have most of the mods you mentioned another good one is the illuminated h gate gear stick surround and lockwood white dials,look forward to you're next upload 👍
I found the h gate to be a really poor fit. The ring however is lovely.
Thanks for the comment mate, I probably won’t do much to the gearshift as in the future I would like to fit A shift tower 😎. Thanks for watching and commenting
It looks cool I always wondered if it was a good fit or not. The ring I agree looks cool, also seen a nice carbon one
@@TheParrottBros yes they are a perfect fit and look much better with the led ring
@@stuartwinstanley4949 perfect fit? I was filing mine down for hours and 1st and 2nd still scrapped badly on it and were under a lot of pressure when in gear.
By the way, does somebody know if the 225hp intake kit from cloud9customs will fit my 180hp TT? If not, can i make it fit? Thanks in advance.
Dankzer If you have a look on his website he actually does one specifically for the 180 bhp buddy, they have a different sized maf sensor.
@@TheParrottBros Yep, found it, thanks. Would it be better to buy the 180hp version or try fitting the 225hp version for max performance? Don't know if the ECU will adapt to a bigger size maf sensor though. Anyway, thanks for your reply. :)
Dankzer I would stock to the correct size, a bigger maf has to be coded / tuned in from memory.
An fyi.... the American tt has 2 small aluminum cup holders between the seats. Maybe that's something you could source from the state for a factory feature. Living your videos, trying to buy my family's 04 1.8 vert. Original Los Angeles Ca car. Just sets in the garage its whole life, still under 50k miles on it. It's mint.
You can purchase a cup holder in the UK but they change hands for in excess of 90-100£. That’s why I made a budget option for those who can’t afford / don’t want an expensive one. ( I believe they were a optional extra)
Yeahs that sounds like a gem of a car, I would love to have a Cali car with low miles 😍
@@TheParrottBros oh wow. No, I sophistication pay that much. Update on trying to buy the TT. I made the deal yesterday. $4k Very excited about it. First thing on the list is timing belt/ water pump.
DeCampers brilliant!! Be sure to get the oil pick up pipe changed if there is no record of it. Not expensive and can save your engine 👍🏻
@@TheParrottBros not expensive to have a garage do it? I've been going through your videos like a crazy person trying to pick up on everything I can.
DeCampers the part is like £30. And if your having a service they will have already dropped your oil out. The only thing they can charge you for is dropping the sump off and swapping the pipe over / cleaning the existing one up a little 👍🏻
Help guys, im looking for a red and black front grill Quattro badge for my mark 1 but cant find any! Any help or where i could get one ?
Do you mean the word quattro to attach to the lower grill if so then ebay is probably your best bet as its not a genuine item
@@TheParrottBros thanks for replying mate. All the ebay items do not fit the TT MK1. There are genuine original ones that do but cannot find in red and black. I even thought about sticking one on the existing but again the MK1 badges seem to be bigger. Mine is 75mmx10mm. Most are 68mm.
@@MrGrinch52 ooo ok then yeah it’s not a genuine part for a MK1 tt so wouldn’t be able to help sorry buddy. Stock only come in black / silver. Anything else is likely to require modification
@@TheParrottBros ok mate. No worries. Ive seen the black and silver but wondered if they did a red and silver as a compromise but cant find one 😥
Why does every video about fitting a boost gauge in an air vent start with '.. so here's the vent with all the insides removed...'
How? I've been trying to work it out without damaging the housing, almost stuck a screw driver in my hand several times!! Any tips?? 😫
If you have Instagram or Facebook message our account and I will send you some pictures 👍🏻
@@TheParrottBros ... Cheers, figured it out just after I posted this. Spent several hours taking dashboard out, plumbing in the hose and wiring, fixing the gauge into the air duct only to find the on starting up the gauge reads nothing .. checked all wiring, checked there vacuum on the hose but gauge doesn't do anything... Now I remember why nowadays I usually pay people to sort my car stuff out!... This is my second gauge to, the first one arrived on 0.5 bar... Sent back and bought a slightly more expensive one
What a nightmare! Hope you get it sorted buddy. Yeah I get like that sometimes. Cars are sent to test us. Especially tt’s 😂
Sick video mate, I bought a mk1 TT last year and it’s good to see someone documenting everything there doing, and the how to vids are great. Will be doing some of these soon
Thank you martyn appreciate the comment. What colour / spec is yours?
Mines black, 1.8T, 180 Quattro. Good little runner to be fair, very fun to drive. 100% going to do the cup holder and going to look into doing other stuff to
Martyn Hayes sounds nice! Yeah they are great fun to drive that’s for sure
The Parrott Bro’s I don’t know if you’ve come across it, but on my TT the head lights have got a bit of condensation inside the lens, I’ve tried taking the bulb caps off so the water can evaporate but it’s been in there so long it’s clouded the inside of the lens. Is there anything you would recommend?
Martyn Hayes you can take the heat lights out and split them and re seal, but that’s Quite a big job, can take bulb out and use a hair dryer to clear. Then drill a small hole in bottom of the lights to allow moisture to escape I’ve heard that works too. It’s not an issue I’ve had to deal with for a long time to be fair.
Ok, so just received my boost gauge and out of the box the needle is well above zero.. I'm guessing it should be exactly on zero when not fitted. Can anyone help me on this? Cheers!
How far of zero are we talking, my one since a couple of psi off but when running is accurate, usually they come from zero have you contacted the seller?
@@TheParrottBros it was sat on 0.5 bar. I 'jogged' it and the needle eventually went to zero, but having googled it, seems like it should arrive on zero really. Not sure I want to fit it just to have to take it out to send it back if it's still f#cky!
Nick temp fit it, just add it into the vac system in the bay then turn the car on. Should pull about -20psi. Or just using a long bit of vac hose plumb it in and run pipe out of bonnet and through window and go for a drive see what it reads
@@TheParrottBros 👍
My TT has the proper cup holder in it and also the official arm rest which I've not seen on other cars. I've seen them for sale on eBay for £200+! To fit the arm rest half of the cup holder has to be cut off though
Nick mmm an armrest would be lovely. Yeah have seen a few, but have never justified spending the money to get one. I’ve seen genuine cup holders sell for over £100 so if you don’t have one the cheaper options are certainly more appealing
@@TheParrottBros ... I've been tempted to sell it and put the money towards a stage 1 remap 😂
Just buy bottled drinks. Haha problem sorted. Hello remap 😂
Nick , remaps would be anotter interesting matter for a video!
Ohhh..by the way....NICE beard!
Gregg Galdo haha thanks 😎
You sound just like thors friend korg
😂
cant understand all the people with a fetish for "cup holder's", you're supposed to be driving the car,
PAUL HAMMERSLEY one may get parched whilst on a strenuous drive in ones automobile 😂 it’s first world problems really but it’s nice to have
Buying stuff off eBay glad to hear it people are like fuck ebay the stuffs shit they obviously don't realise that most companies sell on ebay not just the usual chancers
Nowadays ebay is one of the largest market places and like you say some of the biggest names use it including demon tweaks for an example