thank you thank you thank you. I found this instructional video VERY helpful, don't think there are any short-cuts that make it any easier or quicker, at least for me. ditto the missing drive shaft to hub connection and torque, but found it in the comments herein. the dealer in henderson nevada wanted $900 to do ONE! without any guarantee! said I didn't need to do them both, UGH! I bought a pair for $300 with a lifetime guarantee, and did one myself. the other started leaking within a year, so i just did that one. very much thanks for the torques. I found the job to be rather easy, taking my time about 4 hours each side with help only in getting the new strut up in the fender in place. I just saved $1500, have a lifetime guarantee, and thought it was fun. and, I very much like my 2017 trailhawk
Got into it, thought I found a shortcut, then ended up doing it this way. Following the directions one side took me 1/2 hr, doing it "my way" I spent 2 hours lol
You don't necessarily HAVE to take off the axle or caliper, I just did both on a 2014 and I was able to get it removed without removing those items and without putting excess stress on said parts.
@@jesseshort8 Hi, yes. I calculated around 500kg “force” on the spring so used 3x650kg tie down ratchet straps to keep the spring compressed after compressing it with a trolley jack with the suspension. After that I removed the stupid plastic upper retainer and the brake/abs lines. After removed the single pinch bolt and I had enough space to slide the whole strut out without removing anything else. It is much quicker, safer and cheaper not to mention you don’t need to realign the wheels after literally disassembling the whole suspension.
It takes some doing, hand someone help you. I used a long bar with a strap around the control to give more leverage and then had a buddy position the ball joint.
@@DHAUTOPARTS you are correct!! Cheap part too- at the time, I didn’t see one available. Also, did you swap the ball joint? Awful lot of work- what tool did you use to get it out?
Torque specs are wrong. The ball joint nut is 18 ft/lbs plus 175 degrees. Strut to knuckle bolt is 81 ft/lbs. Stabilizer bar link is 41 ft/lbs. Tie rod nut and caliper bracket bolts they got right though.
Anyone have an idea of how much this would cost? Both parts and labor. I'm sure Dealership will charge a whole heart and kidneys for this. I have a 2012 Jeep Grand Cherokee Overland.
I can co firm that you do actually need to do all the steps listed in this video to replace the struts, there are no shortcuts. I advise just having a shop replace them because you may destroy your ujoints and tie rod ends in the process of doing this video which the shop would have been responsible for during there quote if they destroy the parts during removal
Hi, watching this video it seems to me, it could be done by compressing the spring on the car enough to slide the whole strut out from the knuckle without taking anything apart. Am I wrong? Anyone tried it?
Lmao ,you don't need to take all that off to change strut .you take off the strut clip ,stabilizer link and strut bolt and your done.why would you take apart hub and ball joint.another do it yourself video that you have no idea what your doing
@@seanbanez it's called a pry bar through the control arm to get the knuckle low enough and you simply tap the old strut up with a 3 1/2 pound hammer it slides out of the knuckle with plant of room to go back up into the strut tower,high enough to remove the strut from the knuckle and then slip the strut out.if I'm saying it,its because I've done it with the same exact model .
@@gregrim5982 i hate to be the bearer of bad news, but this is inaccurate, the strut’s spring prevents this from happening, basically you have to pry the system all apart, and it’s awful- i tried to pry this system every which way- and no go. Aside from removing the brake caliper/ disc- the aforementioned video is spot on
Lower ball joint has to come off to get the new strut in, and i still had to use an extremely long pry bar to get the control arm low enough to get it.
2011 Range Rover 3 bolts holding the top of the air strut in the engine bay. 2017 Jeep a plastic clip holding the strut in the engine bay. WOW never gonna drive the Cherokee over a curb again. Bust those plastic clips from an impact and gawd Jeeps are such junk.
thank you thank you thank you. I found this instructional video VERY helpful, don't think there are any short-cuts that make it any easier or quicker, at least for me. ditto the missing drive shaft to hub connection and torque, but found it in the comments herein. the dealer in henderson nevada wanted $900 to do ONE! without any guarantee! said I didn't need to do them both, UGH! I bought a pair for $300 with a lifetime guarantee, and did one myself. the other started leaking within a year, so i just did that one. very much thanks for the torques. I found the job to be rather easy, taking my time about 4 hours each side with help only in getting the new strut up in the fender in place. I just saved $1500, have a lifetime guarantee, and thought it was fun. and, I very much like my 2017 trailhawk
Got into it, thought I found a shortcut, then ended up doing it this way. Following the directions one side took me 1/2 hr, doing it "my way" I spent 2 hours lol
You don't necessarily HAVE to take off the axle or caliper, I just did both on a 2014 and I was able to get it removed without removing those items and without putting excess stress on said parts.
exactly..
Yeah not necessary
What is the torque on the axle nut?
148ft lbs
This is what is indicated for 2014 jeep cherokee latitude, tittled "hub nut" in the service manual
Good video, but y’all forgot about putting the torque spec for nut to the drive shaft in the hub. Kinda important
150 ft lbs no 90 ° stretch
@@chrisrydberg4056 thank you!! i appreciate your thourghness!
Awesome vid. My question is if after replacing the original strut will the truck ride the same . Will this ride be as smooth as it was originally ?
Very helpful, thanks for making this.
this video has skipped the most important safety step of the entire process. Install the axle nut.!!!!!
Does the strut mount have to be in a certain way? Does that hole in the frame have to line up with that hole on the rubber part?
@@tanneritechad he estado buscando información sobre eso, y no encuentro.
Geeezus... All that just for a strut replacement? Holy effff
Exactly my thoughts. This would be a good opportunity to also replace the caliper and the ball joint ... But yeah, it's a lot...
HI, anyone tried to compress the spring on the car and slide the whole strut assembly out from the knuckle without taking anything else apart?
I will try to replace them without taking apart this weekend.
@@LeoMeisels any luck?
@@jesseshort8 Hi, yes. I calculated around 500kg “force” on the spring so used 3x650kg tie down ratchet straps to keep the spring compressed after compressing it with a trolley jack with the suspension. After that I removed the stupid plastic upper retainer and the brake/abs lines. After removed the single pinch bolt and I had enough space to slide the whole strut out without removing anything else. It is much quicker, safer and cheaper not to mention you don’t need to realign the wheels after literally disassembling the whole suspension.
@@LeoMeisels thanks for the feedback buddy.
@@jesseshort8 i forgot to mention that I have a Trailhawk version, hopefully it works with the other ones to. Let me know how it works for you
I've got a 2019 Trail Hawk and am in the process of changing struts. I can't get the ball joint back in the LCA. Any ideas?
It takes some doing, hand someone help you. I used a long bar with a strap around the control to give more leverage and then had a buddy position the ball joint.
@@user-qo7qc5em5t Thx, I was able to get it done, after having the LCA slip on my crowbar and smash the living snot out of my bird finger, lol
If at the bottom of the strut the little fin that helps to keep the strut straight snaps off should the whole thing be replaced?
Ya'll have video of how to change a balljoint on the same vehicle jeep cherokee 2017
You can’t change it- it is part of the knuckle. You need the entire steering knuckle
@@CtRacerX That's not accurate. The ball joint is available separate from the knuckle. Moog part number K500287
@@DHAUTOPARTS you are correct!! Cheap part too- at the time, I didn’t see one available. Also, did you swap the ball joint? Awful lot of work- what tool did you use to get it out?
Alignment afterwards????
Muy recomendable
Torque specs are wrong. The ball joint nut is 18 ft/lbs plus 175 degrees. Strut to knuckle bolt is 81 ft/lbs. Stabilizer bar link is 41 ft/lbs. Tie rod nut and caliper bracket bolts they got right though.
Does anyone have advice on what side these nuts are? I don't normally have any this big.
Working on this model right now, mine are 27mm
Anyone have an idea of how much this would cost? Both parts and labor. I'm sure Dealership will charge a whole heart and kidneys for this. I have a 2012 Jeep Grand Cherokee Overland.
I just got quoted about $470 for one strut (passenger side).
Ordered parts today and the cost for parts was $263.00
Tf did you open the hood for lol
@@user-qo7qc5em5t strut mount
Strut mount
How do they only have 62 k subs
Lol nice, but during you work you used a lift... Lol
I can co firm that you do actually need to do all the steps listed in this video to replace the struts, there are no shortcuts.
I advise just having a shop replace them because you may destroy your ujoints and tie rod ends in the process of doing this video which the shop would have been responsible for during there quote if they destroy the parts during removal
Hi, watching this video it seems to me, it could be done by compressing the spring on the car enough to slide the whole strut out from the knuckle without taking anything apart. Am I wrong? Anyone tried it?
@@arvedui5696 there is another guy in here that compressed the spring with the jack then loosened the pinch bolt and was able to make it come out.
Don't buy jeeps!!! Lol
Lmao ,you don't need to take all that off to change strut .you take off the strut clip ,stabilizer link and strut bolt and your done.why would you take apart hub and ball joint.another do it yourself video that you have no idea what your doing
Wrong, with your steps there is no way to lift the strut high enough to get out of the knuckle. You have to get the knuckle lower
@@seanbanez it's called a pry bar through the control arm to get the knuckle low enough and you simply tap the old strut up with a 3 1/2 pound hammer it slides out of the knuckle with plant of room to go back up into the strut tower,high enough to remove the strut from the knuckle and then slip the strut out.if I'm saying it,its because I've done it with the same exact model .
@@gregrim5982 i hate to be the bearer of bad news, but this is inaccurate, the strut’s spring prevents this from happening, basically you have to pry the system all apart, and it’s awful- i tried to pry this system every which way- and no go. Aside from removing the brake caliper/ disc- the aforementioned video is spot on
I tried to do it this way and there was just no room. Unfortunately all the steps in the video are necessary
Lower ball joint has to come off to get the new strut in, and i still had to use an extremely long pry bar to get the control arm low enough to get it.
These cars are trash, worst engineering ive ever seen
2011 Range Rover 3 bolts holding the top of the air strut in the engine bay. 2017 Jeep a plastic clip holding the strut in the engine bay. WOW never gonna drive the Cherokee over a curb again. Bust those plastic clips from an impact and gawd Jeeps are such junk.
Who designs these piles of 🤬??? Mopar or no car lol. Ill walk