Very helpful and nakasunod naman ako sa steps, yun nga lang kulang lang ng safety precaution yun video. like once you pulled out the ink cartridges, ingatan na matapon yun ink and yun mismong printer head ingatan na wag magalaw.
If the ribbons attach to the print head (,just slide it in). If it happens you pulled out the small ribbon attached in the back, it's a harder work to return it. This case, you will need to pull out the print head carriage.
Hello, I have changed 2 printheads, after cleaning they print blank pages and do not work even after head cleaning and power ink flush, what do I do weong?
Upon removing the white flat cable sa print head, natanggal din po yung blue sa dulo. So it's to put it back kasi natatanggal yung dikit ng blue sa dulo. Any advice po?
Hi po ask ko po if kapag po ba yung part nang print special kapag black may red na yung ibang part ano pong problem nun? Naka ilang balik na ako sa technician pero di pa rin na resolved.
I’m sorry but you tutorial is really shaky and blurry. I cannot find the clips in the back that you’re showing… it’s as if they do not exist on my printer 🤷🏻♀️ I’ve been trying this for over an hour..
For me it was to push tabs at the far ends of the print head near the top of that rear section. Right above the cables but it's small so you have to feel around a little for it. When you feel it, push towards the front pretty good while lifting up and it should pop up. I hope this helps I just not got mine
Very helpful and nakasunod naman ako sa steps, yun nga lang kulang lang ng safety precaution yun video. like once you pulled out the ink cartridges, ingatan na matapon yun ink and yun mismong printer head ingatan na wag magalaw.
How do u put the little white cable back on ?
How will I know or how can I tell if I need a new print head ?
Hi Pinas print. I accidentally pulled out the white ribbon when unlocking the back part (@ 5:30 mark ). How to put this ribbon back?😢 Please help.
If the ribbons attach to the print head (,just slide it in). If it happens you pulled out the small ribbon attached in the back, it's a harder work to return it. This case, you will need to pull out the print head carriage.
Yes, very difficult. I can barely see where to connect. How to pull out print head carriage?
Good Job !!! so please can u tell us where can we buy a head that can work well ? please send me a link where can i buy l805!!
Hello, I have changed 2 printheads, after cleaning they print blank pages and do not work even after head cleaning and power ink flush, what do I do weong?
Question, ano ang ginamit na pang linis na nasa syringe? Water or Alcohol?
Sir! Good Day!
Pano po kaya gagawin if nag mi-mix yung black sa yellow sa nozzle check. Salamat po!
Sir which material is used for head cleanng
Salamat po
Maraming salamat boss!
boss ano gamit mo sa paglinis nang printhead
Upon removing the white flat cable sa print head, natanggal din po yung blue sa dulo. So it's to put it back kasi natatanggal yung dikit ng blue sa dulo. Any advice po?
Anong cleaning solution ung ginamit mong pang pump up
Anong brand po ng cleaning solution yan?
Hi po ask ko po if kapag po ba yung part nang print special kapag black may red na yung ibang part ano pong problem nun? Naka ilang balik na ako sa technician pero di pa rin na resolved.
Nagseservice po ba kayo ng printer repair sa manila?
idol nasan po yung after po malinis yung PRINTHEAD . nakapag print po ba yung sakin kasi after malinis nawala na ang printed eh
Long press nyo yung Ink button para humigop ng ink sa tank. Then Power Ink Flushing or Head Clean.
magkano po kaya ang service fee of cleaning print head?
sir panno po ireplace ung ink nya pag may laman pa nag ibang brand?
buy suction syringe po yung may mahabang metallic tube sa mga printing suppliers natin
saan po makabili ng origina printhead?
Wala po ako alam kapag original printhead. Sa fb marketplace ako nakabili sa akin from China yung seller
hirap hanapin lock nung nasa likod ng print head gamit ang metal
bandang taas po siya located, both sides. ingat lang sa left side pwede ma-damage yung wirestrip papuntang sensor.
I’m sorry but you tutorial is really shaky and blurry. I cannot find the clips in the back that you’re showing… it’s as if they do not exist on my printer 🤷🏻♀️ I’ve been trying this for over an hour..
For me it was to push tabs at the far ends of the print head near the top of that rear section. Right above the cables but it's small so you have to feel around a little for it. When you feel it, push towards the front pretty good while lifting up and it should pop up. I hope this helps I just not got mine