Samsung UE40D5520 TV Repair, Logo only, restarting, restart loop

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 มิ.ย. 2024
  • Samsung TV restarting, restart loop, Logo only
    @southlondonrepair We are based in Addiscombe, South London. We repair consoles, Audio - Video equipment, televisions, vintage electronics and anything else what the customers can bring it in.
    Thanks for watching the video. Please subscribe and post any question in the comments section below - we are more than happy to help.
    You can also contact us in email: info@southlondonrepair.co.uk
    #microsoldering #repair #righttorepair #tvrepair #samsungrepair
    Samsung UE32 UE37 UE40 UE46 D5500 D5700 D5520
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 4

  • @dulkazizi
    @dulkazizi 21 วันที่ผ่านมา

    Clean and nice work 😁

  • @sunildutt3924
    @sunildutt3924 3 วันที่ผ่านมา

    Where from u purchase feeded nand because when we will try to read backup the programer will be cracked id & set could be gose in 3 blink the D series is very risky

    • @southlondonrepair
      @southlondonrepair  33 นาทีที่ผ่านมา

      We are bought empty chips, usually 10 at the same time. We saved the nand software from working television. When we don't find for a model, we usually download from BadCaps (find link below).
      Many of the new nand chip is already has bad cells, so first we check all the chips. Usually a 50% is is returned.
      Once we have a good chip, we write the dump using one of our programmers.
      Many times you can see the same problem rebooting, but the problem is in 30% is a bad soldering.
      I got better after 50 mainboard repair, but still making mistakes.
      Sometimes the heat can also damage the chip, so if it is not working, sometimes a remove it and verify the firmware. If the chip is damaged, I just replace it.
      If I find a good seller, I always order 5 extra chips just for stock.
      www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-tvs-and-video-sources/55274-eeprom-dump-thread/page70#post1735627